Skip to main content
CP247
All systems
Gallery
BrandHELLA
MPN8DB 355 006-821
OE refs0
SKU0002-8DB 355 006-821
GTIN / EAN4082300351132

Similar products

Customers also bought

Doing a front brake service?

Get all 2 parts in one click with our pre-assembled kit.

View kit

Details

SpecificationValue
BrandHELLA
MPN8db355006-821
CategoryBrake pad set
Thickness [mm]15.5 mm
Width [mm]109.9 mm
Height [mm]50 mm
Weight [kg]1.1 kg
Brake SystemLucas

OE part numbers

No OEM references found.

About this product

HELLA brake pads (8DB 355 006-821) deliver consistent stopping power through a friction compound engineered for low noise, reduced brake dust, and stable bite across a wide temperature range. The pad compound characteristics — Thickness [mm]: EPDM, Rubber mm, Width [mm]: 109, Stainless Steel mm, Height [mm]: 50 mm, Weight [kg]: Steel, Steel kg — are selected to balance progressive pedal feel with minimal wear on mating discs. Designed as a direct replacement for SANTANA applications, these pads slot into the original caliper bracket without modification. Cross-references OE part numbers: 110400, 181960, 2110400, 222563 and 14 more. HELLA brake friction products are validated in independent dynamometer tests and are used by authorised service centres throughout Europe. Brake pads typically need replacing every 25,000–50,000 miles, depending on driving style, vehicle weight, and whether you drive mostly in urban stop-start traffic or on open roads. Watch for squealing or grinding noises when braking, increased stopping distances, a pulsating brake pedal, or a brake warning light on your dashboard — any of these signals that the friction material is worn to its minimum thickness. Brake pad replacement is a moderate DIY job requiring basic hand tools, a jack, and axle stands — allow approximately 1–2 hours per axle for a first-time installer, less if you have experience with caliper removal. When choosing brake pads, look for ECE R90 approval (mandatory for road use in Europe), copper-free formulations for environmental compliance, and a shim or anti-squeal backing plate for quiet operation. Replacing brake pads promptly prevents scoring and heat damage to the more expensive brake discs, saving significantly on repair costs in the long run. Every part is dispatched with tracked delivery and a 14-day money-back guarantee with hassle-free returns.

Brake pad set buying guide

Why replace this part?

Brake pads are the primary friction component in your braking system. As they wear thin, braking performance deteriorates, increasing stopping distances and putting your safety at risk. Worn pads can also damage brake discs, leading to more expensive repairs.

Signs you need a replacement

  • Squealing or grinding noises when braking
  • increased stopping distances
  • brake pedal vibration or pulsation
  • dashboard warning light
  • visible pad thickness below 3mm
  • pulling to one side when braking

When to replace

Every 30,000–70,000 miles depending on driving conditions, pad material, and vehicle weight. City driving with frequent stops wears pads faster than motorway driving.

Installation difficulty:Moderate — requires basic tools and mechanical knowledge

About HELLA

HELLA, founded in 1899 in Lippstadt, Germany, is a global automotive lighting and electronics specialist now operating as FORVIA HELLA. HELLA specialises in headlamps, rear lights, signal lighting, sensors, actuators, and electronic control units. As an OE supplier to virtually all major car manufacturers, HELLA products represent the cutting edge of automotive lighting and electronic technology. With 125+ years of innovation in vehicle illumination and electronics, HELLA is the definitive choice for high-quality lighting and electronic component replacements.

Suitable cars

Equivalent products (20)

AUGROS55603427
BREMBOP72001
GIRLING6121051
HELLA355 006-821
HELLA355006821
HELLA8DB 355 006-821
HELLA PAGID355 006-821
HELLA PAGID8DB355006821
ICER181960
KAWE110400
MAGNETI MARELLIT1576MM
MINTEXMDB2781
NK222563
PAGIDT1576
R BRAKERB1960
REMSA110400
ROADHOUSE2110400
TEXTAR2430201
TEXTARTX0776
WOKINGP1004300

Brake pad set HELLA 8DB 355 006-821compatible car models

Car modelsSANTANA: 300/350
Engines1.6
Year of manufacture1998
Manufacturer article number (MPN)8DB 355 006-821
Compatibility check

Loading vehicle data…

Please wait while we load vehicle compatibility information.
Description and what's included

HELLA 8db355006-821 Brake pad set. Brake System: Lucas. Height [mm]: 50 mm. Supplementary Article/Info 2: 7. Supplementary Article/Supplementary Info: 0. Thickness [mm]: 15,5 mm. Wear Warning Contact: 51. Weight [kg]: 1,1 kg. Width [mm]: 109,9 mm

What's included:
  • 1x Set of brake pads (axle set)
  • Wear indicator wire (where applicable)
  • Mounting accessories (where applicable)
Shipping, returns, warranty

Free UK delivery on orders over £99.00. Tracked standard shipping.

  • Standard delivery: 5–9 business days
  • Order before 5pm — ships the next working day
  • Free returns within 14 days
  • All parts backed by manufacturer warranty

Warranty: 12-month manufacturer warranty on all parts. 14-day money-back guarantee if the part doesn't fit your vehicle.

Frequently Asked Questions

Is this Brake pad set compatible with my car?

This Brake pad set fits SANTANA vehicles. Use the vehicle selector at the top of the page to check exact compatibility — enter your car's make, model, and engine for a confirmed fitment match. All fitment data is verified through TecDoc.

What specifications does this HELLA Brake pad set have?

This HELLA Brake pad set has the following specifications: Thickness [mm]: 15,5 mm; Width [mm]: 109,9 mm; Height [mm]: 50 mm; Weight [kg]: 1,1 kg; Wear Warning Contact: 51; Supplementary Article/Supplementary Info: 0. Check the full specifications table above for complete details.

How much does a Brake pad set cost?

Brake pad set prices vary depending on brand, specifications, and vehicle compatibility. Check the current price above for this HELLA Brake pad set. All parts come with our 14-day money-back guarantee.

How do I know when to replace my Brake pad set?

Common signs include squealing or grinding noises when braking, increased stopping distances, brake pedal vibration, or a dashboard warning light. Most brake pads should be inspected every 20,000 miles and replaced when pad thickness falls below 3mm.

What tools do I need to replace a Brake pad set?

Tools needed: floor jack and axle stands, lug wrench or 19mm socket, brake caliper wind-back tool (or C-clamp), 7mm hex / Torx socket for caliper bolts, brake cleaner spray, copper grease, torque wrench. Difficulty: Moderate DIY. Safety warning: Never compress the caliper piston without checking the brake fluid reservoir level will not overflow; brake fluid is corrosive -- keep it off painted surfaces and skin.

Related categories