METZGER AUTOTEILEGREENPARTSArt. 55003308£0.99
Also known as: Suspension arm bushing sleeve, Suspension Arm Bushing Sleeve, sleeve, suspension arm bushing
OEM & aftermarket suspension arm bush sleeve from top brands — compare prices, check fitment, order with free delivery
Shop 255 suspension arm bush sleeve from 24 trusted brands including YAMATO, KOREA, Oyodo. Compare prices, check vehicle compatibility, and get free delivery on orders over £99.
A suspension arm bush sleeve — also known as a suspension arm bushing sleeve — is a metallic or composite tube pressed inside a rubber or polyurethane bush to provide the correct interference fit when the bush is pressed into its housing. Without the sleeve, a bush with the wrong outer diameter cannot be correctly retained in the suspension arm or subframe bracket, leading to noise, premature wear, and handling degradation. CarParts247 stocks suspension arm bush sleeves from Febi Bilstein and Lemforder to restore correct bush geometry on a wide range of European suspension designs.
Bush sleeves are needed in two scenarios: when the original bush and sleeve are a separate service part rather than a bonded assembly, and when the housing bore has worn oversize and an oversized sleeve is required to restore correct interference.
Press the sleeve into the housing bore or onto the inner tube of the bush using a press or suitable mandrel. Ensure the sleeve is fully seated and square before pressing in the outer bush. On polyurethane bush kits, grease the sleeve and housing bore with the supplied assembly lubricant — dry fitting causes squeak and accelerates bush wear.
Torque the suspension arm pivot bolt with the vehicle at ride height to avoid pre-loading the bush in its twisted position.
Commonly searched OE numbers fitting Suspension Arm Bush Sleeve from the TecDoc catalogue.
Common original equipment numbers linked to stocked alternatives.
