SKF timing belt (VKMT 06115) synchronises the crankshaft and camshaft with tooth-pitch accuracy measured in hundredths of a millimetre — preventing valve-to-piston contact that would destroy the engine if the belt skips or snaps. Belt construction data — Number of Teeth: 153, Width [mm]: 26 mm, Belts: Copper — reflects the tensile load the belt must sustain at peak RPM, with an HNBR or EPDM compound chosen for the specific temperature range of your engine bay. OE cross-references: 153 HTDP 26, 19498, 1987949516, 30865077 and 11 more. SKF timing belts are tested to OEM replacement intervals and carry a service-life certificate verifying the compound meets the manufacturer's durability specification. Timing belt replacement intervals vary by manufacturer — typically every 40,000–100,000 miles or 4–6 years, whichever comes first — and must be followed strictly because a snapped belt on an interference engine causes catastrophic valve and piston damage. There are rarely visible warning signs before a timing belt fails; some belts may exhibit surface cracking, fraying, or a glazed appearance, but many break without warning — this is why interval-based replacement is essential. Timing belt replacement is an advanced DIY job requiring careful crankshaft and camshaft alignment, a torque wrench, and engine-specific locking tools — budget 3–5 hours and consult a workshop manual for your exact engine code. When replacing the timing belt, always fit a new tensioner, idler pulley, and water pump (if belt-driven) at the same time — these components have the same service life, and a failed tensioner will destroy the new belt. Investing in a quality timing belt kit now prevents the most expensive engine failure a vehicle can suffer — a belt-related engine rebuild typically costs 10–20 times the price of the belt kit itself. Every part is dispatched with tracked delivery and a 14-day money-back guarantee with hassle-free returns.

SKF, founded in 1907 in Gothenburg, Sweden, is the world's leading bearing manufacturer with over a century of precision engineering expertise. SKF specialises in wheel bearings, hub units, tensioner pulleys, water pump bearings, and drivetrain bearings for all vehicle types. As an OE supplier to virtually every major automotive manufacturer, SKF products are built with exceptional precision and durability. Trusted globally for rotating equipment solutions, SKF bearings deliver smooth, quiet operation and extended service life in the most demanding conditions.