Skip to main content
CP247
Gallery
BrandBOSCH
MPN1 987 946 322
OE refs0
SKU0030-1 987 946 322
GTIN / EAN4047024804326

Similar products

Customers also bought

Doing a timing belt kit?

Get all 2 parts in one click with our pre-assembled kit.

View kit

Details

SpecificationValue
BrandBOSCH
Length [mm]1285 mm
Width [mm]25 mm
Tooth Pitch [mm]9,525 mm

OE part numbers

No OEM references found.

What's in the kit

This kit ships with 2 factory-matched components. Each part below is supplied as part of the kit; click any linked MPN to view that component on its own.

#Part numberComponentQty
11 987 949 023
Timing Belt
Number of Teeth
135
Length [mm]
1285 mm
Width [mm]
25 mm
Tooth Pitch [mm]
9,525 mm
1
21 987 949 344Tensioner Pulley, timing belt1

About this product

BOSCH timing belt (1 987 946 322) synchronises the crankshaft and camshaft with tooth-pitch accuracy measured in hundredths of a millimetre — preventing valve-to-piston contact that would destroy the engine if the belt skips or snaps. Belt construction data — Number of Teeth: 135, Length [mm]: 1285 mm, Width [mm]: 25 mm, Tooth Pitch [mm]: Stainless Steel, 525 mm — reflects the tensile load the belt must sustain at peak RPM, with an HNBR or EPDM compound chosen for the specific temperature range of your engine bay. Tooth profile, pitch, and width are specified for the camshaft drive on AUDI, VW engines; always replace the tensioner and idler pulleys simultaneously to prevent premature failure. OE cross-references: 1 987 948 248, 1 987 948 601, 1 987 948 653, 530000210 and 8 more. BOSCH timing belts are tested to OEM replacement intervals and carry a service-life certificate verifying the compound meets the manufacturer's durability specification. Timing belt replacement intervals vary by manufacturer — typically every 40,000–100,000 miles or 4–6 years, whichever comes first — and must be followed strictly because a snapped belt on an interference engine causes catastrophic valve and piston damage. There are rarely visible warning signs before a timing belt fails; some belts may exhibit surface cracking, fraying, or a glazed appearance, but many break without warning — this is why interval-based replacement is essential. Timing belt replacement is an advanced DIY job requiring careful crankshaft and camshaft alignment, a torque wrench, and engine-specific locking tools — budget 3–5 hours and consult a workshop manual for your exact engine code. When replacing the timing belt, always fit a new tensioner, idler pulley, and water pump (if belt-driven) at the same time — these components have the same service life, and a failed tensioner will destroy the new belt. Investing in a quality timing belt kit now prevents the most expensive engine failure a vehicle can suffer — a belt-related engine rebuild typically costs 10–20 times the price of the belt kit itself. Every part is dispatched from our UK warehouse with a 30-day money-back guarantee and free hassle-free returns.

About BOSCH

Robert Bosch GmbH, founded in 1886 in Stuttgart, Germany, is one of the world's largest automotive parts suppliers. Bosch specialises in braking systems, fuel injection, spark plugs, alternators, and electronic engine management. As an OE supplier to virtually every major car manufacturer, Bosch parts meet or exceed original equipment specifications. With over 130 years of engineering innovation, choosing Bosch means choosing proven reliability backed by extensive research and development.

Suitable cars

Equivalent products (13)

BOSCH1 987 948 248
BOSCH1 987 948 601
BOSCH1 987 948 653
GATESVKMA01010
GATESVKMA91005
OPTIBELTKT1003
QUINTON HAZELLQBK100
RUVILLE5540570
Schaeffler INA530000210
SKFVKMA01010

Timing Belt Kit BOSCH 1 987 946 322compatible car models

Car modelsAUDI: 80 B2 Saloon (811, 813, 814, 819, 853), 80 B3 Saloon (893, 894, 8A2), 90 B3 (893, 894, 8A2); VW: CADDY I (14), GOLF I (17), GOLF II (19E, 1G1), GOLF II Van (19E, 1G1), ILTIS (183), JETTA I (16), JETTA II (19E, 1G2, 165), PASSAT B1 (32), PASSAT B1 Variant (33), PASSAT B2 (32B) (+7 more)
Engines1.6 D; 1.6 TD; 1.5 D; 1.6
Year of manufacture1973-2008
Manufacturer article number (MPN)1 987 946 322
Compatibility check

Loading vehicle data…

Please wait while we load vehicle compatibility information.
Description and what's included

BOSCH 1987946322 . Length [mm]: 1285 mm. Number of Teeth: 135. Number of track rollers: 1. Tooth Pitch [mm]: 9,525 mm. Width [mm]: 25 mm

What's included:
  • 1x Timing belt
  • 1x Tensioner pulley
  • Idler pulleys (where applicable)
Shipping, returns, warranty

Free UK delivery on orders over £99.00. Express and standard shipping available.

  • Standard delivery: 2-5 business days
  • Express delivery: 1-2 business days
  • Free returns within 14 days
  • All parts backed by manufacturer warranty

Warranty: 12-month manufacturer warranty on all parts. 14-day money-back guarantee if the part doesn't fit your vehicle.

Frequently Asked Questions

Is this Timing Belt Kit compatible with my car?

This Timing Belt Kit fits AUDI, VW vehicles. Use the vehicle selector at the top of the page to check exact compatibility — enter your car's make, model, and engine for a confirmed fitment match. All fitment data is verified through TecDoc.

What specifications does this BOSCH Timing Belt Kit have?

This BOSCH Timing Belt Kit has the following specifications: Number of Teeth: 135; Length [mm]: 1285 mm; Width [mm]: 25 mm; Tooth Pitch [mm]: 9,525 mm; Number of track rollers: 1. Check the full specifications table above for complete details.

How much does a Timing Belt Kit cost?

This BOSCH Timing Belt Kit is available for £39.99. Timing Belt Kit prices vary depending on brand, specifications, and vehicle compatibility. BOSCH parts offer a balance of quality and value, backed by our 14-day money-back guarantee.

How do I know when to replace my Timing Belt Kit?

Replace the full kit — belt, tensioner, and idler pulleys — at the manufacturer's scheduled interval (typically 60,000-100,000 miles). Never replace the belt alone without inspecting the tensioner and water pump, as worn pulleys can cause premature belt failure.

What tools do I need to replace a Timing Belt Kit?

Tools needed: engine timing lock kit (vehicle-specific), camshaft sprocket holder, socket set, torque wrench, tensioner tool. Difficulty: Professional recommended. Safety warning: Always replace the tensioner and idler pulley at the same time as the belt -- the kit includes these components. Incorrect installation can result in engine destruction.

Is the BOSCH 1 987 946 322 the same as the BOSCH 1 987 946 305?

No, while both are Timing Belt Kit parts, they are different products. The BOSCH 1 987 946 322 has Number of Teeth: 135, Length [mm]: 1285 mm, Width [mm]: 25 mm. The BOSCH 1 987 946 305 may differ in dimensions, fitting position, or material composition. Always verify compatibility with your specific vehicle using our vehicle selector, or contact our customer service team for assistance.

Related categories