Skip to main content
CP247
Gallery
BrandVALEO
MPN837497
OE refs114
SKU0021-837497
GTIN / EAN3276428374970

Similar products

Customers also bought

Doing a clutch replacement?

Get all 2 parts in one click with our pre-assembled kit.

View kit

Details

SpecificationValue
BrandVALEO
Weight [kg]18.06 kg
Bore Diameter [mm]29.4 mm
Overall Length [mm]63.1 mm
Tightening Torque [Nm]60 Nm
Tightening angle [degrees]50 °
Clutch Pressure Plate Outer Diameter [mm]241 mm

OE/OEM numbers (114)

Search by this OE number to find compatible parts

Where this part fits

Original-fit position for OE 03G105264J. The red ring marks where this part installs on the vehicle.

flywheel with clutch F >> 1K-6-730 798 — Jetta Jetta A5 (Typ 1K) (2006–2011) — Crankshaft conrod bearings F >> 1K-7-299 000
Jetta Jetta A5 (Typ 1K) (2006–2011) · Crankshaft conrod bearings F >> 1K-7-299 000Position 7

What's in the kit

This kit ships with 1 factory-matched components. Each part below is supplied as part of the kit; click any linked MPN to view that component on its own.

#Part numberComponentQty
1875031
central clutch release
Weight [kg]
0,44 kg
Bore Diameter [mm]
29 mm
Material
6
for manufacturer number
ZA29016.7.1
1

About this product

VALEO clutch kit (837497) restores clean gear changes and full torque transfer by replacing the friction disc, pressure plate, and release bearing as a matched assembly — eliminating the judder and slip that worn components cause. The assembly is rated for Number of Teeth: 23, Weight [kg]: Composite, 06 kg, Bore Diameter [mm]: 29, Copper mm, Overall Length [mm]: 63, Steel mm, with the friction disc compound chosen to match the torque output of the engine and resist glazing under the stop-start urban driving cycles where clutches wear fastest. Spline count, disc diameter, and diaphragm spring load are matched to the gearbox input shaft on AUDI, SEAT, SKODA, VW models for a bolt-on installation requiring no machining of the flywheel face. Replaces OE clutch references: 03G105264J, 03G105266A, 03G105266AD, 03G105266AF and 120 more. VALEO drivetrain components are dynamometer-verified for torque capacity before leaving the factory and are supplied with installation lubricant and alignment tools in the kit. Clutch lifespan varies widely — from 30,000 miles in heavy urban traffic to 100,000+ miles with smooth driving habits — but any manual-gearbox vehicle will eventually need a clutch replacement. Common symptoms of clutch wear include a slipping clutch (engine revs rising without a corresponding increase in speed), a biting point that has moved high in the pedal travel, judder when pulling away, and difficulty selecting gears. Clutch replacement is a significant job that requires gearbox removal — most DIY mechanics will need a transmission jack, an engine support bar, and a full set of sockets; allow a full day for the work. Always replace the complete clutch kit (disc, pressure plate, and release bearing) together — fitting only one component means the gearbox must be removed again when the remaining parts wear out shortly afterwards. Addressing clutch slip early prevents flywheel damage from overheating — a resurfaced or replaced flywheel adds substantial cost to a job that is already labour-intensive, so prompt replacement saves money. Every part is dispatched from our UK warehouse with a 30-day money-back guarantee and free hassle-free returns.

Clutch Kit buying guide

Why replace this part?

The clutch transfers engine power to the transmission. A worn clutch slips under load, makes gear changes difficult, and can eventually leave you stranded. Complete clutch kits include the disc, pressure plate, and release bearing for a comprehensive repair.

Signs you need a replacement

  • Difficulty shifting gears
  • burning smell when driving
  • clutch pedal feels soft or sticky
  • engine revs increase without acceleration (slipping)
  • unusual noises when pressing the clutch pedal

When to replace

Typically 60,000–100,000 miles, but highly variable based on driving style. City driving and towing wear clutches faster.

Installation difficulty:Professional — we recommend workshop fitting

About VALEO

Valeo, founded in 1923 in Saint-Ouen, France, is a major global automotive supplier with expertise spanning multiple vehicle systems. Valeo specialises in clutch kits, alternators, starters, wiper systems, lighting, and thermal management components. As an OE supplier to Peugeot, Renault, Citroën, Volkswagen, and many others, Valeo products maintain factory-quality standards. With 19 research centres worldwide and a strong focus on innovation, Valeo combines French engineering heritage with cutting-edge automotive technology for dependable replacement parts.

Suitable cars

Equivalent products (10)

AISINFDE-VW03
AISINFDEVW03
EXEDYVWFD015£451.99
Schaeffler LuK415 0269 10
Schaeffler LuK415026910
Schaeffler LuK415043110
Schaeffler LuK600029900

Clutch Kit VALEO 837497compatible car models

Car modelsAUDI: A3 (8P1), A3 Convertible (8P7), A3 Sportback (8PA), Q3 (8UB, 8UG); SEAT: ALHAMBRA (710, 711), ALTEA (5P1), ALTEA XL (5P5, 5P8), LEON (1P1); SKODA: OCTAVIA II (1Z3), OCTAVIA II Combi (1Z5), SUPERB II (3T4), SUPERB II Estate (3T5), YETI (5L); VW: CADDY III Box Body/MPV (2KA, 2KH, 2CA, 2CH), CADDY III MPV (2KB, 2KJ, 2CB, 2CJ), CADDY IV Box Body/MPV (SAA, SAH), CADDY IV MPV (SAB, SAJ), CC B7 (358), EOS (1F7, 1F8), GOLF PLUS V (5M1, 521), GOLF VI (5K1), GOLF VI Convertible (517), JETTA IV (162, 163, AV3, AV2) (+7 more)
Engines2.0 TDI; 2.0 TDI 16V; 2.0 TDI 4motion
Year of manufacture2003-2022
Manufacturer article number (MPN)837497
OE part numbers03G105264J, 03G105266A, 03G105266AD, 03G105266AF, 03G105266AJ, 03G105266AQ, 03G105266B, 03G105266BB, 03G105266BC, 03G105266BN, 03G105266BP, 03G141015, 03G141015H, 03G141015L, 03G141015LX, 03L105266A, 03L105266AD, 03L105266B, 03L105266BM, 03L105266BN (+94 more)
Compatibility check

Loading vehicle data…

Please wait while we load vehicle compatibility information.
Description and what's included

VALEO 837497 FULLPACK DMF (CSC) with High Efficiency Clutch. Bore Diameter [mm]: 29,4 mm. Clutch Pressure Plate Outer Diameter [mm]: 241 mm. Number of mounting bores: 6. Number of Teeth: 23. Overall Length [mm]: 63,1 mm. Supplementary Article/Info 2: 29. Supplementary Article/Info 2: 500. Supplementary Article/Supplementary Info: 38

What's included:
  • 1x Clutch disc
  • 1x Pressure plate
  • 1x Release bearing
Shipping, returns, warranty

Free UK delivery on orders over £99.00. Express and standard shipping available.

  • Standard delivery: 2-5 business days
  • Express delivery: 1-2 business days
  • Free returns within 14 days
  • All parts backed by manufacturer warranty

Warranty: 12-month manufacturer warranty on all parts. 14-day money-back guarantee if the part doesn't fit your vehicle.

Frequently Asked Questions

Is this Clutch Kit compatible with my car?

This Clutch Kit fits AUDI, SEAT, SKODA, VW vehicles. Use the vehicle selector at the top of the page to check exact compatibility — enter your car's make, model, and engine for a confirmed fitment match. All fitment data is verified through TecDoc.

What specifications does this VALEO Clutch Kit have?

This VALEO Clutch Kit has the following specifications: Number of Teeth: 23; Weight [kg]: 18,06 kg; Bore Diameter [mm]: 29,4 mm; Overall Length [mm]: 63,1 mm; Tightening Torque [Nm]: 60 Nm; Supplementary Article/Supplementary Info: 445. Check the full specifications table above for complete details.

What OE part numbers does this Clutch Kit replace?

This Clutch Kit replaces OE part numbers: 03G105264J, 03G105266A, 03G105266AD, 03G105266AF, 03G105266AJ, 03G105266AQ, 03G105266B, 03G105266BB and 106 more. Cross-reference these numbers with your vehicle's original part number to confirm compatibility.

How much does a Clutch Kit cost?

This VALEO Clutch Kit is available for £427.99. Clutch Kit prices vary depending on brand, specifications, and vehicle compatibility. VALEO parts offer a balance of quality and value, backed by our 14-day money-back guarantee.

How do I know when to replace my Clutch Kit?

Signs include difficulty shifting gears, a burning smell, the clutch pedal feeling soft or sticky, slipping under load, or unusual noises when pressing the clutch pedal.

What tools do I need to replace a Clutch Kit?

Tools needed: gearbox jack or transmission support, complete socket and spanner set (10-19mm), clutch alignment tool (usually included in kit), flywheel locking tool (vehicle-specific), torque wrench, clutch grease for input shaft splines. Difficulty: Professional recommended. Safety warning: Clutch dust from older components may contain asbestos -- wear an approved dust respirator and use clutch cleaner spray rather than compressed air. The gearbox must be fully supported before unbolting from the engine.

Can I use this part as a replacement for OE 03G105264J?

Yes, this VALEO Clutch Kit is a direct replacement for OE part number 03G105264J. It is manufactured to meet or exceed original equipment specifications, ensuring proper fitment and performance. All cross-reference data is verified through TecDoc.

Is the VALEO 837497 the same as the VALEO 003344?

No, while both are Clutch Kit parts, they are different products. The VALEO 837497 has Number of Teeth: 23, Weight [kg]: 18,06 kg, Bore Diameter [mm]: 29,4 mm. The VALEO 003344 may differ in dimensions, fitting position, or material composition. Always verify compatibility with your specific vehicle using our vehicle selector, or contact our customer service team for assistance.

Related categories