Skip to main content
CP247
Gallery
BrandVALEO
MPN801040
OE refs11
SKU0021-801040
GTIN / EAN3276428010403

Similar products

Customers also bought

Doing a clutch replacement?

Get all 2 parts in one click with our pre-assembled kit.

View kit

Details

SpecificationValue
BrandVALEO
Hub Profile26.47 x 23.28
Weight [kg]5,677 kg
Clutch Pressure Plate Outer Diameter [mm]215 mm

OE/OEM numbers (11)

Search by this OE number to find compatible parts

Where this part fits

Original-fit position for OE 5050664. The red ring marks where this part installs on the vehicle.

Kit - Clutch Repair; Exchange Part (New For Old); 216MM/8 1/2; Asbestos Based - Use Not Permitted In The Following Countries: S/D/Dk/Gb; (Granada/Scorpio 1985-1992 OHC 2.0 OR Granada/Scorpio 1985-1992 1.8L SOHC 8V Petrol) — AGB OHC(TL/LL) — AGB08 OHC(TL/LL).Clutch, Clutch Housing & Flywheel › AGB08011 Clutch
AGB OHC(TL/LL) · AGB08 OHC(TL/LL).Clutch, Clutch Housing & Flywheel › AGB08011 ClutchPosition 26

What's in the kit

This kit ships with 1 factory-matched components. Each part below is supplied as part of the kit; click any linked MPN to view that component on its own.

#Part numberComponentQty
1358275
release bearing
Weight [kg]
0,17 kg
Outer Diameter [mm]
215 mm
1

About this product

VALEO clutch kit (801040) restores clean gear changes and full torque transfer by replacing the friction disc, pressure plate, and release bearing as a matched assembly — eliminating the judder and slip that worn components cause. The assembly is rated for Number of Teeth: 23, Hub Profile: 26, 47 x 23, 28, Weight [kg]: Rubber, 677 kg, Supplementary Article/Info 2: 523, with the friction disc compound chosen to match the torque output of the engine and resist glazing under the stop-start urban driving cycles where clutches wear fastest. Spline count, disc diameter, and diaphragm spring load are matched to the gearbox input shaft on FORD, FORD AUSTRALIA models for a bolt-on installation requiring no machining of the flywheel face. Replaces OE clutch references: 002215100, 132515, 132521, 132527 and 46 more. VALEO drivetrain components are dynamometer-verified for torque capacity before leaving the factory and are supplied with installation lubricant and alignment tools in the kit. Clutch lifespan varies widely — from 30,000 miles in heavy urban traffic to 100,000+ miles with smooth driving habits — but any manual-gearbox vehicle will eventually need a clutch replacement. Common symptoms of clutch wear include a slipping clutch (engine revs rising without a corresponding increase in speed), a biting point that has moved high in the pedal travel, judder when pulling away, and difficulty selecting gears. Clutch replacement is a significant job that requires gearbox removal — most DIY mechanics will need a transmission jack, an engine support bar, and a full set of sockets; allow a full day for the work. Always replace the complete clutch kit (disc, pressure plate, and release bearing) together — fitting only one component means the gearbox must be removed again when the remaining parts wear out shortly afterwards. Addressing clutch slip early prevents flywheel damage from overheating — a resurfaced or replaced flywheel adds substantial cost to a job that is already labour-intensive, so prompt replacement saves money. Every part is dispatched from our UK warehouse with a 30-day money-back guarantee and free hassle-free returns.

Clutch Kit buying guide

Why replace this part?

The clutch transfers engine power to the transmission. A worn clutch slips under load, makes gear changes difficult, and can eventually leave you stranded. Complete clutch kits include the disc, pressure plate, and release bearing for a comprehensive repair.

Signs you need a replacement

  • Difficulty shifting gears
  • burning smell when driving
  • clutch pedal feels soft or sticky
  • engine revs increase without acceleration (slipping)
  • unusual noises when pressing the clutch pedal

When to replace

Typically 60,000–100,000 miles, but highly variable based on driving style. City driving and towing wear clutches faster.

Installation difficulty:Professional — we recommend workshop fitting

About VALEO

Valeo, founded in 1923 in Saint-Ouen, France, is a major global automotive supplier with expertise spanning multiple vehicle systems. Valeo specialises in clutch kits, alternators, starters, wiper systems, lighting, and thermal management components. As an OE supplier to Peugeot, Renault, Citroën, Volkswagen, and many others, Valeo products maintain factory-quality standards. With 19 research centres worldwide and a strong focus on innovation, Valeo combines French engineering heritage with cutting-edge automotive technology for dependable replacement parts.

Suitable cars

Equivalent products (40)

Show all 40 OE numbers
ACDelcoAC151K
ACDelcoAC226K
BORG & BECKHK8050
DELPHIHK08050
DELPHIHK09613
EXEDYFMK2012
KAWE954052
LUCAS ELECTRICALTCK2623
MAPA002215100
MAPA2215100
MOTAQUIPVCK110
NationalCK9081
NK132515
NK132521
NK132527
QUINTON HAZELLQKT742AF
SACHS3000 012 004
SACHS3000012004
SACHS3000 080 001
SACHS3000080001
SACHS3000120001
SACHS4000 512 001
SACHS4000512001
SASICSCL6404£124.99
Schaeffler LuK622 0017 06
Schaeffler LuK622001706
Schaeffler LuK622017506
Schaeffler LuK622 0568 00
Schaeffler LuK622056800
Schaeffler LuK622 1317 00
Schaeffler LuK622131700
Schaeffler LuK622 3064 00
Schaeffler LuK622306400
TRWTCK2623
UNIPARTGCK173AF
UNIPARTGCK873AF
VALEO899035
WESTLAKEWFD050

Clutch Kit VALEO 801040compatible car models

Car modelsFORD: CAPRI I (ECJ), CAPRI II (GECP), CAPRI III (GECP), CONSUL Coupe (GGCL), CONSUL (GGFL), CONSUL Turnier (GGNL), CORTINA, CORTINA Coupe, ESCORT II (ATH), GRANADA (GGTL, GGFL) (+20 more)
Engines1600; 1.6; 1700; 1600 GT; 2.0 RS; 1.7; 2.0; 1.8
Year of manufacture1962-1994
Manufacturer article number (MPN)801040
OE part numbers5010145, 5011065, 5011070, 5011089, 5013615, 5023474, 5023783, 5027008, 5027203, 5028001, 5050664
Compatibility check

Loading vehicle data…

Please wait while we load vehicle compatibility information.
Description and what's included

VALEO 801040 KIT3P. Clutch Pressure Plate Outer Diameter [mm]: 215 mm. Hub Profile: 26,47 x 23,28. Number of Teeth: 23. Supplementary Article/Info 2: 523. Weight [kg]: 5,677 kg

What's included:
  • 1x Clutch disc
  • 1x Pressure plate
  • 1x Release bearing
Shipping, returns, warranty

Free UK delivery on orders over £99.00. Express and standard shipping available.

  • Standard delivery: 2-5 business days
  • Express delivery: 1-2 business days
  • Free returns within 14 days
  • All parts backed by manufacturer warranty

Warranty: 12-month manufacturer warranty on all parts. 14-day money-back guarantee if the part doesn't fit your vehicle.

Frequently Asked Questions

Is this Clutch Kit compatible with my car?

This Clutch Kit fits FORD, FORD AUSTRALIA vehicles. Use the vehicle selector at the top of the page to check exact compatibility — enter your car's make, model, and engine for a confirmed fitment match. All fitment data is verified through TecDoc.

What specifications does this VALEO Clutch Kit have?

This VALEO Clutch Kit has the following specifications: Number of Teeth: 23; Hub Profile: 26,47 x 23,28; Weight [kg]: 5,677 kg; Supplementary Article/Info 2: 523; Clutch Pressure Plate Outer Diameter [mm]: 215 mm. Check the full specifications table above for complete details.

What OE part numbers does this Clutch Kit replace?

This Clutch Kit replaces OE part numbers: 5010145, 5011065, 5011070, 5011089, 5013615, 5023474, 5023783, 5027008 and 3 more. Cross-reference these numbers with your vehicle's original part number to confirm compatibility.

How much does a Clutch Kit cost?

This VALEO Clutch Kit is available for £149.99. Clutch Kit prices vary depending on brand, specifications, and vehicle compatibility. VALEO parts offer a balance of quality and value, backed by our 14-day money-back guarantee.

How do I know when to replace my Clutch Kit?

Signs include difficulty shifting gears, a burning smell, the clutch pedal feeling soft or sticky, slipping under load, or unusual noises when pressing the clutch pedal.

What tools do I need to replace a Clutch Kit?

Tools needed: gearbox jack or transmission support, complete socket and spanner set (10-19mm), clutch alignment tool (usually included in kit), flywheel locking tool (vehicle-specific), torque wrench, clutch grease for input shaft splines. Difficulty: Professional recommended. Safety warning: Clutch dust from older components may contain asbestos -- wear an approved dust respirator and use clutch cleaner spray rather than compressed air. The gearbox must be fully supported before unbolting from the engine.

Can I use this part as a replacement for OE 5010145?

Yes, this VALEO Clutch Kit is a direct replacement for OE part number 5010145. It is manufactured to meet or exceed original equipment specifications, ensuring proper fitment and performance. All cross-reference data is verified through TecDoc.

Is the VALEO 801040 the same as the VALEO 003344?

No, while both are Clutch Kit parts, they are different products. The VALEO 801040 has Number of Teeth: 23, Hub Profile: 26,47 x 23,28, Weight [kg]: 5,677 kg. The VALEO 003344 may differ in dimensions, fitting position, or material composition. Always verify compatibility with your specific vehicle using our vehicle selector, or contact our customer service team for assistance.

Related categories