Skip to main content
CP247
Gallery
BrandVALEO
MPN872918
OE refs8
SKU0021-872918
GTIN / EAN3276428729183

Similar products

Customers also bought

Doing a front brake service?

Get all 2 parts in one click with our pre-assembled kit.

View kit

Details

SpecificationValue
BrandVALEO
CategoryBrake pad set
Fitting PositionFront Axle
Thickness [mm]19.5 mm
Width [mm]141 mm
Height [mm]66 mm
Weight [kg]2,203 kg
Number of wear indicators [per axle]1 Per Axle
Brake SystemBREMBO
Warning Contact Length [mm]160 mm

OE/OEM numbers (8)

Search by this OE number to find compatible parts

Where this part fits

Original-fit position for OE 77362219. The red ring marks where this part installs on the vehicle.

WIRE-SENSOR — Brakes
BrakesPosition main

About this product

VALEO brake pads (872918) deliver consistent stopping power through a friction compound engineered for low noise, reduced brake dust, and stable bite across a wide temperature range. The pad compound characteristics — Fitting Position: Front Axle, Thickness [mm]: Synthetic, Rubber mm, Width [mm]: 141 mm, Height [mm]: 66 mm — are selected to balance progressive pedal feel with minimal wear on mating discs. Designed as a direct replacement for CITROËN, FIAT, PEUGEOT applications, these pads slot into the original caliper bracket without modification. Cross-references OE part numbers: 05P966, 0960.01, 0 986 424 703, 0 986 494 048 and 53 more. VALEO brake friction products are validated in independent dynamometer tests and are used by authorised service centres throughout Europe. Brake pads typically need replacing every 25,000–50,000 miles, depending on driving style, vehicle weight, and whether you drive mostly in urban stop-start traffic or on open roads. Watch for squealing or grinding noises when braking, increased stopping distances, a pulsating brake pedal, or a brake warning light on your dashboard — any of these signals that the friction material is worn to its minimum thickness. Brake pad replacement is a moderate DIY job requiring basic hand tools, a jack, and axle stands — allow approximately 1–2 hours per axle for a first-time installer, less if you have experience with caliper removal. When choosing brake pads, look for ECE R90 approval (mandatory for road use in Europe), copper-free formulations for environmental compliance, and a shim or anti-squeal backing plate for quiet operation. Replacing brake pads promptly prevents scoring and heat damage to the more expensive brake discs, saving significantly on repair costs in the long run. Every part is dispatched from our UK warehouse with a 30-day money-back guarantee and free hassle-free returns.

Brake pad set buying guide

Why replace this part?

Brake pads are the primary friction component in your braking system. As they wear thin, braking performance deteriorates, increasing stopping distances and putting your safety at risk. Worn pads can also damage brake discs, leading to more expensive repairs.

Signs you need a replacement

  • Squealing or grinding noises when braking
  • increased stopping distances
  • brake pedal vibration or pulsation
  • dashboard warning light
  • visible pad thickness below 3mm
  • pulling to one side when braking

When to replace

Every 30,000–70,000 miles depending on driving conditions, pad material, and vehicle weight. City driving with frequent stops wears pads faster than motorway driving.

Installation difficulty:Moderate — requires basic tools and mechanical knowledge

About VALEO

Valeo, founded in 1923 in Saint-Ouen, France, is a major global automotive supplier with expertise spanning multiple vehicle systems. Valeo specialises in clutch kits, alternators, starters, wiper systems, lighting, and thermal management components. As an OE supplier to Peugeot, Renault, Citroën, Volkswagen, and many others, Valeo products maintain factory-quality standards. With 19 research centres worldwide and a strong focus on innovation, Valeo combines French engineering heritage with cutting-edge automotive technology for dependable replacement parts.

Suitable cars

Equivalent products (49)

Show all 49 OE numbers
A.B.S.37331
A.B.S.37578
A.B.S.P23091
APECPAD1239
ATE13046049782
BOSCH0 986 424 703
BOSCH0 986 TB2 432
BOSCH986424703
BOSCH986494048
BOSCH986TB2432
BREMBOP23091
FERODOFSL1478
fri.tech.334.0
fri.tech.3340
FTEBL1859A4
FTEBL1859B4
HELLA PAGID8DB 355 010-391
HELLA PAGID8DB355010391
ICER141523£40.99
ICER141523-066
ICER141523066
LPR05P966£21.99
LPR5P966
MGA689
NK221947
RAICAMRA.0773.0
RAICAMRA07730
RAICAMRA07730K1
RAICAMRA.0773.0K1
REMSA96001
ROADHOUSE2960.01
ROADHOUSE296001
sbs1501221947
TRUSTING334.0
TRUSTING3340
TRWGDB1517£37.99
ZIMMERMANN239171951
ZIMMERMANN239171952

Brake pad set VALEO 872918compatible car models

Car modelsCITROËN: JUMPER I Bus (244, Z), JUMPER I Platform/Chassis (230), JUMPER I Platform/Chassis (244), JUMPER I Van (230L), JUMPER I Van (244); FIAT: DUCATO Bus (230), DUCATO Bus (244), DUCATO Bus (250), DUCATO Platform/Chassis (230), DUCATO Platform/Chassis (244), DUCATO Platform/Chassis (250), DUCATO Van (230), DUCATO Van (244); PEUGEOT: BOXER Bus (230P), BOXER Bus (244, Z), BOXER Platform/Chassis (244), BOXER Platform/Chassis (ZCT), BOXER Van (230L), BOXER Van (244)
Engines2.0; 2.8 HDi; 2.0 HDi; 1.9 D; 120 Multijet 2,3 D; 2.0 BiFuel; 1.9 TD
Year of manufacture1994-2009
Manufacturer article number (MPN)872918
OE part numbers4252-42, 4252-43, 4254-58, 71752979, 77362219, 77364862, 9949482, 9949516
Compatibility check

Loading vehicle data…

Please wait while we load vehicle compatibility information.
Description and what's included

VALEO 872918 OPTIPACK for LCV. Brake System: BREMBO. Fitting Position: VA. Height [mm]: 66 mm. Number of wear indicators [per axle]: 1 Per Axle. Supplementary Article/Info 2: 275. Supplementary Article/Info 2: 934. Thickness [mm]: 19,5 mm. Warning Contact Length [mm]: 160 mm

What's included:
  • 1x Set of brake pads (axle set)
  • Wear indicator wire (where applicable)
  • Mounting accessories (where applicable)
Shipping, returns, warranty

Free UK delivery on orders over £99.00. Express and standard shipping available.

  • Standard delivery: 2-5 business days
  • Express delivery: 1-2 business days
  • Free returns within 14 days
  • All parts backed by manufacturer warranty

Warranty: 12-month manufacturer warranty on all parts. 14-day money-back guarantee if the part doesn't fit your vehicle.

Frequently Asked Questions

Is this Brake pad set compatible with my car?

This Brake pad set fits CITROËN, FIAT, PEUGEOT vehicles. Use the vehicle selector at the top of the page to check exact compatibility — enter your car's make, model, and engine for a confirmed fitment match. All fitment data is verified through TecDoc.

What specifications does this VALEO Brake pad set have?

This VALEO Brake pad set has the following specifications: Fitting Position: VA; Thickness [mm]: 19,5 mm; Width [mm]: 141 mm; Height [mm]: 66 mm; Weight [kg]: 2,203 kg; Number of wear indicators [per axle]: 1 Per Axle. Check the full specifications table above for complete details.

What OE part numbers does this Brake pad set replace?

This Brake pad set replaces OE part numbers: 4252-42, 4252-43, 4254-58, 71752979, 77362219, 77364862, 9949482, 9949516. Cross-reference these numbers with your vehicle's original part number to confirm compatibility.

How much does a Brake pad set cost?

This VALEO Brake pad set is available for £37.99. Brake pad set prices vary depending on brand, specifications, and vehicle compatibility. VALEO parts offer a balance of quality and value, backed by our 14-day money-back guarantee.

How do I know when to replace my Brake pad set?

Common signs include squealing or grinding noises when braking, increased stopping distances, brake pedal vibration, or a dashboard warning light. Most brake pads should be inspected every 20,000 miles and replaced when pad thickness falls below 3mm.

What tools do I need to replace a Brake pad set?

Tools needed: floor jack and axle stands, lug wrench or 19mm socket, brake caliper wind-back tool (or C-clamp), 7mm hex / Torx socket for caliper bolts, brake cleaner spray, copper grease, torque wrench. Difficulty: Moderate DIY. Safety warning: Never compress the caliper piston without checking the brake fluid reservoir level will not overflow; brake fluid is corrosive -- keep it off painted surfaces and skin.

Can I use this part as a replacement for OE 4252-42?

Yes, this VALEO Brake pad set is a direct replacement for OE part number 4252-42. It is manufactured to meet or exceed original equipment specifications, ensuring proper fitment and performance. All cross-reference data is verified through TecDoc.

Is the VALEO 872918 the same as the VALEO 301005?

No, while both are Brake pad set parts, they are different products. The VALEO 872918 has Fitting Position: VA, Thickness [mm]: 19,5 mm, Width [mm]: 141 mm. The VALEO 301005 may differ in dimensions, fitting position, or material composition. Always verify compatibility with your specific vehicle using our vehicle selector, or contact our customer service team for assistance.

Related categories