Skip to main content
CP247
Gallery
BrandVALEO
MPN598292
OE refs10
SKU0021-598292
GTIN / EAN3276425982925

Similar products

Customers also bought

Doing a front brake service?

Get all 2 parts in one click with our pre-assembled kit.

View kit

Details

SpecificationValue
BrandVALEO
CategoryBrake pad set
Fitting PositionRear Axle
Thickness [mm]15.4 mm
Test MarkECE-R90
Width [mm]54 mm
Height [mm]65 mm
Weight [kg]0,525 kg
Brake SystemCITROEN

OE/OEM numbers (10)

Search by this OE number to find compatible parts

Where this part fits

Original-fit position for OE E172193. The red ring marks where this part installs on the vehicle.

PART — Others
OthersPosition main

About this product

VALEO brake pads (598292) deliver consistent stopping power through a friction compound engineered for low noise, reduced brake dust, and stable bite across a wide temperature range. The pad compound characteristics — Fitting Position: Rear Axle, Thickness [mm]: EPDM, Copper mm, Test Mark: ECE-R90, Width [mm]: 54 mm — are selected to balance progressive pedal feel with minimal wear on mating discs. Designed as a direct replacement for CITROËN applications, these pads slot into the original caliper bracket without modification. Cross-references OE part numbers: 0102.10, 0311.00, 05P133, 05P194 and 109 more. VALEO brake friction products are validated in independent dynamometer tests and are used by authorised service centres throughout Europe. Brake pads typically need replacing every 25,000–50,000 miles, depending on driving style, vehicle weight, and whether you drive mostly in urban stop-start traffic or on open roads. Watch for squealing or grinding noises when braking, increased stopping distances, a pulsating brake pedal, or a brake warning light on your dashboard — any of these signals that the friction material is worn to its minimum thickness. Brake pad replacement is a moderate DIY job requiring basic hand tools, a jack, and axle stands — allow approximately 1–2 hours per axle for a first-time installer, less if you have experience with caliper removal. When choosing brake pads, look for ECE R90 approval (mandatory for road use in Europe), copper-free formulations for environmental compliance, and a shim or anti-squeal backing plate for quiet operation. Replacing brake pads promptly prevents scoring and heat damage to the more expensive brake discs, saving significantly on repair costs in the long run. Every part is dispatched from our UK warehouse with a 30-day money-back guarantee and free hassle-free returns.

Brake pad set buying guide

Why replace this part?

Brake pads are the primary friction component in your braking system. As they wear thin, braking performance deteriorates, increasing stopping distances and putting your safety at risk. Worn pads can also damage brake discs, leading to more expensive repairs.

Signs you need a replacement

  • Squealing or grinding noises when braking
  • increased stopping distances
  • brake pedal vibration or pulsation
  • dashboard warning light
  • visible pad thickness below 3mm
  • pulling to one side when braking

When to replace

Every 30,000–70,000 miles depending on driving conditions, pad material, and vehicle weight. City driving with frequent stops wears pads faster than motorway driving.

Installation difficulty:Moderate — requires basic tools and mechanical knowledge

About VALEO

Valeo, founded in 1923 in Saint-Ouen, France, is a major global automotive supplier with expertise spanning multiple vehicle systems. Valeo specialises in clutch kits, alternators, starters, wiper systems, lighting, and thermal management components. As an OE supplier to Peugeot, Renault, Citroën, Volkswagen, and many others, Valeo products maintain factory-quality standards. With 19 research centres worldwide and a strong focus on innovation, Valeo combines French engineering heritage with cutting-edge automotive technology for dependable replacement parts.

Suitable cars

Equivalent products (109)

Show all 109 OE numbers
ABEXT6188
ABEXT6300
A.B.S.36129/1
A.B.S.361291
A.B.S.361291OE
A.B.S.P61037
A.B.S.P61062
ADAD504
APECPAD650
APECPAD770
ATE13.0460-4901.2
ATE13046049012
ATE13.0460-4905.2
ATE13046049052
ATE13046049562
AUTODISTRUBUTIONAD504
BENDIX571264B
BENDIX571264X
BENDIX571363B
BOSCH986460958
BREMBOP61037
BREMBOP 61 062
BREMBOP61062
COMLINEADB0800
COMLINECBP0800
DELPHILP0655
FERODOFDB615
FERODOFSL615
FERODOTAR615
fri.tech.294.0
fri.tech.2940
FTEBL1031A1
FTEBL1098A1
HELLA PAGID8DB 355 005-901
HELLA PAGID8DB355005901
HELLA PAGID8DB 355 019-011
HELLA PAGID8DB355019011
ICER180812
JURID571264D
JURID571264J
JURID571264JAS
LPR05P133£15.99
LPR05P194£11.99
LPR5P133
LPR5P194
LUCAS ELECTRICAL6109869
LUCAS ELECTRICAL6112479
LUCAS ELECTRICALGDB1247
LUCAS ELECTRICALGDB986
METELLI22-0284-0
METELLI2202840
METELLI22-0285-0
METELLI2202850
MGA120
MGA242
MINTEXMDB1120
MINTEXMDB1425
NK1501221923
NK1501221932
NK221932
PAGIDT0150
PAGIDT9008
QUINTON HAZELLBLF474
QUINTON HAZELLBP265
QUINTON HAZELLBP474
RAICAMRA.0172.1
RAICAMRA01721
REMSA0102.10
REMSA0311.00
REMSA10210
REMSA31100
ROADHOUSE2102.10
ROADHOUSE210210
ROADHOUSE2311.00
ROADHOUSE231100
ROULUNDS RUBBER450981
SANGSIN BRAKESP1254
sbs1501221923
sbs1501221932
TEXTAR20162
TEXTAR2016203
TEXTAR2016215404
TEXTAR20575
TEXTAR2057504
TEXTAR2057511
TEXTAR2057517004
TEXTAR2126717605
TEXTAR8337D1217
TRIPLE FIVE8671000808
TRIPLE FIVE8671010065
TRIPLE FIVEABP2490
TRUSTING293.0
TRUSTING2930
TRUSTING294.0
TRUSTING2940
TRWGDB986£20.99
ZIMMERMANN20162.150.1
ZIMMERMANN201621501

Brake pad set VALEO 598292compatible car models

Car modelsCITROËN: CX II, CX I (MA), XANTIA Break (X1, X2), XANTIA Estate Van (X2), XANTIA (X1, X2), XM Break (Y3), XM Break (Y4), XM (Y3), XM (Y4)
Engines20 RE; 2000; 1.8 i; 1.9 DT; 1.6 i; 2.0 i; 2.0
Year of manufacture1974-2003
Manufacturer article number (MPN)598292
OE part numbers1617255680, 4251-72, 4251-83, 95650872, 95651047, 95654085, 95659642, 95666973, 95667788, E172193
Compatibility check

Loading vehicle data…

Please wait while we load vehicle compatibility information.
Description and what's included

VALEO 598292 Brake pad set. Brake System: CITROEN. Fitting Position: HA. Height [mm]: 65 mm. Supplementary Article/Info 2: 451. Test Mark: ECE-R90. Thickness [mm]: 15,4 mm. Wear Warning Contact: 52. Weight [kg]: 0,525 kg

What's included:
  • 1x Set of brake pads (axle set)
  • Wear indicator wire (where applicable)
  • Mounting accessories (where applicable)
Shipping, returns, warranty

Free UK delivery on orders over £99.00. Express and standard shipping available.

  • Standard delivery: 2-5 business days
  • Express delivery: 1-2 business days
  • Free returns within 14 days
  • All parts backed by manufacturer warranty

Warranty: 12-month manufacturer warranty on all parts. 14-day money-back guarantee if the part doesn't fit your vehicle.

Frequently Asked Questions

Is this Brake pad set compatible with my car?

This Brake pad set fits CITROËN vehicles. Use the vehicle selector at the top of the page to check exact compatibility — enter your car's make, model, and engine for a confirmed fitment match. All fitment data is verified through TecDoc.

What specifications does this VALEO Brake pad set have?

This VALEO Brake pad set has the following specifications: Fitting Position: HA; Thickness [mm]: 15,4 mm; Test Mark: ECE-R90; Width [mm]: 54 mm; Height [mm]: 65 mm; Weight [kg]: 0,525 kg. Check the full specifications table above for complete details.

What OE part numbers does this Brake pad set replace?

This Brake pad set replaces OE part numbers: 1617255680, 4251-72, 4251-83, 95650872, 95651047, 95654085, 95659642, 95666973 and 2 more. Cross-reference these numbers with your vehicle's original part number to confirm compatibility.

How much does a Brake pad set cost?

This VALEO Brake pad set is available for £16.99. Brake pad set prices vary depending on brand, specifications, and vehicle compatibility. VALEO parts offer a balance of quality and value, backed by our 14-day money-back guarantee.

How do I know when to replace my Brake pad set?

Common signs include squealing or grinding noises when braking, increased stopping distances, brake pedal vibration, or a dashboard warning light. Most brake pads should be inspected every 20,000 miles and replaced when pad thickness falls below 3mm.

What tools do I need to replace a Brake pad set?

Tools needed: floor jack and axle stands, lug wrench or 19mm socket, brake caliper wind-back tool (or C-clamp), 7mm hex / Torx socket for caliper bolts, brake cleaner spray, copper grease, torque wrench. Difficulty: Moderate DIY. Safety warning: Never compress the caliper piston without checking the brake fluid reservoir level will not overflow; brake fluid is corrosive -- keep it off painted surfaces and skin.

Can I use this part as a replacement for OE 1617255680?

Yes, this VALEO Brake pad set is a direct replacement for OE part number 1617255680. It is manufactured to meet or exceed original equipment specifications, ensuring proper fitment and performance. All cross-reference data is verified through TecDoc.

Is the VALEO 598292 the same as the VALEO 301005?

No, while both are Brake pad set parts, they are different products. The VALEO 598292 has Fitting Position: HA, Thickness [mm]: 15,4 mm, Test Mark: ECE-R90. The VALEO 301005 may differ in dimensions, fitting position, or material composition. Always verify compatibility with your specific vehicle using our vehicle selector, or contact our customer service team for assistance.

Related categories