Skip to main content
CP247
Gallery
BrandVALEO
MPN601137
OE refs6
SKU0021-601137
GTIN / EAN3276426011372

Similar products

Customers also bought

Doing a front brake service?

Get all 2 parts in one click with our pre-assembled kit.

View kit

Details

SpecificationValue
BrandVALEO
CategoryBrake pad set
Fitting PositionRear Axle
Thickness [mm]17.7 mm
Test MarkECE-R90
Width [mm]109 mm
Height [mm]53.6 mm
Weight [kg]1.19 kg
Brake SystemBOSCH

OE/OEM numbers (6)

Search by this OE number to find compatible parts

Where this part fits

Original-fit position for OE 2K5698451. The red ring marks where this part installs on the vehicle.

PART — Others
OthersPosition main

About this product

VALEO brake pads (601137) deliver consistent stopping power through a friction compound engineered for low noise, reduced brake dust, and stable bite across a wide temperature range. The pad compound characteristics — Fitting Position: Rear Axle, Thickness [mm]: Fibreglass, Ceramic mm, Test Mark: ECE-R90, Width [mm]: 109 mm — are selected to balance progressive pedal feel with minimal wear on mating discs. Designed as a direct replacement for AUDI, SEAT, SKODA, SKODA (SVW) and 2 other makes applications, these pads slot into the original caliper bracket without modification. Cross-references OE part numbers: 05P1608, 0 986 494 416, 1015, 13.0460-3858.2 and 59 more. VALEO brake friction products are validated in independent dynamometer tests and are used by authorised service centres throughout Europe. Brake pads typically need replacing every 25,000–50,000 miles, depending on driving style, vehicle weight, and whether you drive mostly in urban stop-start traffic or on open roads. Watch for squealing or grinding noises when braking, increased stopping distances, a pulsating brake pedal, or a brake warning light on your dashboard — any of these signals that the friction material is worn to its minimum thickness. Brake pad replacement is a moderate DIY job requiring basic hand tools, a jack, and axle stands — allow approximately 1–2 hours per axle for a first-time installer, less if you have experience with caliper removal. When choosing brake pads, look for ECE R90 approval (mandatory for road use in Europe), copper-free formulations for environmental compliance, and a shim or anti-squeal backing plate for quiet operation. Replacing brake pads promptly prevents scoring and heat damage to the more expensive brake discs, saving significantly on repair costs in the long run. Every part is dispatched from our UK warehouse with a 30-day money-back guarantee and free hassle-free returns.

Brake pad set buying guide

Why replace this part?

Brake pads are the primary friction component in your braking system. As they wear thin, braking performance deteriorates, increasing stopping distances and putting your safety at risk. Worn pads can also damage brake discs, leading to more expensive repairs.

Signs you need a replacement

  • Squealing or grinding noises when braking
  • increased stopping distances
  • brake pedal vibration or pulsation
  • dashboard warning light
  • visible pad thickness below 3mm
  • pulling to one side when braking

When to replace

Every 30,000–70,000 miles depending on driving conditions, pad material, and vehicle weight. City driving with frequent stops wears pads faster than motorway driving.

Installation difficulty:Moderate — requires basic tools and mechanical knowledge

About VALEO

Valeo, founded in 1923 in Saint-Ouen, France, is a major global automotive supplier with expertise spanning multiple vehicle systems. Valeo specialises in clutch kits, alternators, starters, wiper systems, lighting, and thermal management components. As an OE supplier to Peugeot, Renault, Citroën, Volkswagen, and many others, Valeo products maintain factory-quality standards. With 19 research centres worldwide and a strong focus on innovation, Valeo combines French engineering heritage with cutting-edge automotive technology for dependable replacement parts.

Suitable cars

Equivalent products (61)

Show all 61 OE numbers
A.B.S.37784
A.B.S.P85114
APECPAD1751
ATE13046038582
ATE13047038582
BENDIX573312B
BOSCH986494416
BREMBOP85114
BREMBOP85114N
BREMBOP85114X
COMLINEADB02022
fri.tech.906.0
fri.tech.9060
FTEBL2072A3
HELLA PAGID8DB 355 014-021
HELLA PAGID8DB355014021
HELLA PAGID8DB 355 026-261
HELLA PAGID8DB355026261
ICER181967£40.99
LPR05P1608£30.99
LPR5P1608
LUCAS ELECTRICAL6118414
METELLI2208890
MGA1015
MINTEXMDB2972
NK15012247101
NK2247101
PAGIDT1782
RAICAMRA.0346.0
RAICAMRA03460
REMSA1420.00
REMSA142000
ROADHOUSE21420.00
ROADHOUSE2142000
sbs15012247101
STARLINEBD S559P
STARLINEBDS559P
TEXTAR24563
TEXTAR2456303
TEXTAR2456317714
TRUSTING906.0
TRUSTING9060
TRWGDB1841£35.99
ZIMMERMANN245631651
ZIMMERMANN245631652

Brake pad set VALEO 601137compatible car models

Car modelsAUDI: A1 (8X1, 8XK), A1 Sportback (8XA, 8XF), A3 (8P1), A3 Convertible (8P7), A3 Sportback (8PA); SEAT: ALTEA (5P1), ALTEA XL (5P5, 5P8), LEON (1M1), LEON (1P1); SKODA: OCTAVIA II (1Z3), OCTAVIA II Combi (1Z5), OCTAVIA III (5E3, NL3, NR3), OCTAVIA III Combi (5E5, 5E6), SUPERB II (3T4), SUPERB II Estate (3T5), SUPERB III (3V3), SUPERB III Estate (3V5), YETI (5L); SKODA (SVW): OCTAVIA Hatchback (913), YETI (0Y6, 0Y7); VW: BEETLE (5C1, 5C2), BEETLE Convertible (5C7, 5C8), CADDY ALLTRACK IV Box Body/MPV (SAA), CADDY ALLTRACK IV MPV (SAB), CADDY III Box Body/MPV (2KA, 2KH, 2CA, 2CH), CADDY III MPV (2KB, 2KJ, 2CB, 2CJ), CADDY IV Box Body/MPV (SAA, SAH), CADDY IV MPV (SAB, SAJ), EOS (1F7, 1F8), GOLF ALLTRACK VII Variant (BA5, BV5)
Engines1.2 TFSI; 1.2 TSI; 1.9 TDI; 1.6 TDI; 1.4 TSI; 2.0 TSI; 1.4 TSi; 1.0 TSI; 1.6 TDI 4motion
Year of manufacture1999-2024
Manufacturer article number (MPN)601137
OE part numbers2K5698451, 5K0698451, 5K0698451A, 5K0698451C, 5K0698451D, JZW698451Q
Compatibility check

Loading vehicle data…

Please wait while we load vehicle compatibility information.
Description and what's included

VALEO 601137 Brake pad set. Brake System: BOSCH. Fitting Position: HA. Height [mm]: 53,6 mm. Supplementary Article/Info 2: 274. Supplementary Article/Info 2: 450. Test Mark: ECE-R90. Thickness [mm]: 17,7 mm. Weight [kg]: 1,19 kg

What's included:
  • 1x Set of brake pads (axle set)
  • Wear indicator wire (where applicable)
  • Mounting accessories (where applicable)
Shipping, returns, warranty

Free UK delivery on orders over £99.00. Express and standard shipping available.

  • Standard delivery: 2-5 business days
  • Express delivery: 1-2 business days
  • Free returns within 14 days
  • All parts backed by manufacturer warranty

Warranty: 12-month manufacturer warranty on all parts. 14-day money-back guarantee if the part doesn't fit your vehicle.

Frequently Asked Questions

Is this Brake pad set compatible with my car?

This Brake pad set fits AUDI, SEAT, SKODA, SKODA (SVW), VW and 1 more vehicles. Use the vehicle selector at the top of the page to check exact compatibility — enter your car's make, model, and engine for a confirmed fitment match. All fitment data is verified through TecDoc.

What specifications does this VALEO Brake pad set have?

This VALEO Brake pad set has the following specifications: Fitting Position: HA; Thickness [mm]: 17,7 mm; Test Mark: ECE-R90; Width [mm]: 109 mm; Height [mm]: 53,6 mm; Weight [kg]: 1,19 kg. Check the full specifications table above for complete details.

What OE part numbers does this Brake pad set replace?

This Brake pad set replaces OE part numbers: 2K5698451, 5K0698451, 5K0698451A, 5K0698451C, 5K0698451D, JZW698451Q. Cross-reference these numbers with your vehicle's original part number to confirm compatibility.

How much does a Brake pad set cost?

This VALEO Brake pad set is available for £35.99. Brake pad set prices vary depending on brand, specifications, and vehicle compatibility. VALEO parts offer a balance of quality and value, backed by our 14-day money-back guarantee.

How do I know when to replace my Brake pad set?

Common signs include squealing or grinding noises when braking, increased stopping distances, brake pedal vibration, or a dashboard warning light. Most brake pads should be inspected every 20,000 miles and replaced when pad thickness falls below 3mm.

What tools do I need to replace a Brake pad set?

Tools needed: floor jack and axle stands, lug wrench or 19mm socket, brake caliper wind-back tool (or C-clamp), 7mm hex / Torx socket for caliper bolts, brake cleaner spray, copper grease, torque wrench. Difficulty: Moderate DIY. Safety warning: Never compress the caliper piston without checking the brake fluid reservoir level will not overflow; brake fluid is corrosive -- keep it off painted surfaces and skin.

Can I use this part as a replacement for OE 2K5698451?

Yes, this VALEO Brake pad set is a direct replacement for OE part number 2K5698451. It is manufactured to meet or exceed original equipment specifications, ensuring proper fitment and performance. All cross-reference data is verified through TecDoc.

Is the VALEO 601137 the same as the VALEO 301005?

No, while both are Brake pad set parts, they are different products. The VALEO 601137 has Fitting Position: HA, Thickness [mm]: 17,7 mm, Test Mark: ECE-R90. The VALEO 301005 may differ in dimensions, fitting position, or material composition. Always verify compatibility with your specific vehicle using our vehicle selector, or contact our customer service team for assistance.

Related categories