Skip to main content
CP247
Gallery
BrandTRW
MPNGDB3071
OE refs14
SKU0161-GDB3071
GTIN / EAN3322937197781

Similar products

Customers also bought

Doing a front brake service?

Get all 2 parts in one click with our pre-assembled kit.

View kit

Details

SpecificationValue
BrandTRW
MPNgdb3071
CategoryBrake pad set
Manufacturer RestrictionAKEBONO
Thickness [mm]16.3 mm
Test MarkE9 90R 01107/240
Width [mm]125.8 mm
Height [mm]45.3 mm

OE/OEM numbers (14)

Search by this OE number to find compatible parts

About this product

TRW brake pads (GDB3071) deliver consistent stopping power through a friction compound engineered for low noise, reduced brake dust, and stable bite across a wide temperature range. The pad compound characteristics — Manufacturer Restriction: AKEBONO, Thickness [mm]: Silicone, Cast Iron mm, Test Mark: E9 90R 01107/240, Width [mm]: 125, Carbon mm — are selected to balance progressive pedal feel with minimal wear on mating discs. Designed as a direct replacement for DAIHATSU applications, these pads slot into the original caliper bracket without modification. Cross-references OE part numbers: 00491-87727, 00491-87727-000, 04491-87724, 04491-87725 and 66 more. TRW brake friction products are validated in independent dynamometer tests and are used by authorised service centres throughout Europe. Brake pads typically need replacing every 25,000–50,000 miles, depending on driving style, vehicle weight, and whether you drive mostly in urban stop-start traffic or on open roads. Watch for squealing or grinding noises when braking, increased stopping distances, a pulsating brake pedal, or a brake warning light on your dashboard — any of these signals that the friction material is worn to its minimum thickness. Brake pad replacement is a moderate DIY job requiring basic hand tools, a jack, and axle stands — allow approximately 1–2 hours per axle for a first-time installer, less if you have experience with caliper removal. When choosing brake pads, look for ECE R90 approval (mandatory for road use in Europe), copper-free formulations for environmental compliance, and a shim or anti-squeal backing plate for quiet operation. Replacing brake pads promptly prevents scoring and heat damage to the more expensive brake discs, saving significantly on repair costs in the long run. Every part is dispatched from our UK warehouse with a 30-day money-back guarantee and free hassle-free returns.

Brake pad set buying guide

Why replace this part?

Brake pads are the primary friction component in your braking system. As they wear thin, braking performance deteriorates, increasing stopping distances and putting your safety at risk. Worn pads can also damage brake discs, leading to more expensive repairs.

Signs you need a replacement

  • Squealing or grinding noises when braking
  • increased stopping distances
  • brake pedal vibration or pulsation
  • dashboard warning light
  • visible pad thickness below 3mm
  • pulling to one side when braking

When to replace

Every 30,000–70,000 miles depending on driving conditions, pad material, and vehicle weight. City driving with frequent stops wears pads faster than motorway driving.

Installation difficulty:Moderate — requires basic tools and mechanical knowledge

About TRW

TRW Automotive, with roots dating back to 1901 in Cleveland, USA, is a global leader in safety-critical automotive components, now part of ZF Friedrichshafen. TRW specialises in brake pads, brake discs, steering components, suspension parts, and engine valves. As an OE supplier to virtually all major global car manufacturers, TRW products meet the highest safety and performance standards. Trusted by vehicle makers for over a century, TRW delivers braking and steering components that prioritise safety without compromise.

Suitable cars

Equivalent products (61)

Show all 61 OE numbers
A.B.S.36869
ACDelcoAC691481D
APECPAD952
ASIMCOKD3714
ASIMCOKD3714W
ATE13046058982
BendixDB1271
BENDIX572409B
BENDIXDB1271
BLUE PRINTADD64215
BORG & BECKBBP1581
BOSCH0 986 424 590
BOSCH0 986 AB2 555
BOSCH0 986 TB2 715
Brake ENGINEERINGPA1271
BREMBOP16007
E.T.F.120601
FERODOFDB1009
FIRST LINEFBP3204
fri.tech.3880
FTE9001502
FTEBL1634A2
HELLA8DB 355 016-991
HERTH+BUSS JAKOPARTSJ3606011
ICER181340
KAGER350797
KAWE81089
KBPBP1509
LEMFÖRDER26412
LPR05P457£20.99
MAPCO6604
METELLI2203790
METZGER AUTOTEILE050102
MINTEXMDB1862
MK KashiyamaD0027M
NECTOFD6906A
NIPPARTSJ3606011
NK225109
OPTIMAL9962
PAGIDT3090
PEX7538
QH Benelux2916
QUINTON HAZELLBLF806
QUINTON HAZELLBP806
RAMEDERT0610004
REMSA050102
REMSA50102
ROADHOUSE2501.02
ROULUNDS RUBBER691481
sbs225109
SPIDAN32025
TEXTAR2195202
TEXTAR2195215605
TRISCAN811041003
TRUSTING3880
VALEO598850
ZIMMERMANN219521451

Brake pad set TRW GDB3071compatible car models

Car modelsDAIHATSU: CHARADE IV (G200, G202), CHARADE IV Saloon (G203), GRAN MOVE (G3)
Engines1.0; 1.5 16V; 1.5 16V 4WD
Year of manufacture1993-2001
Manufacturer article number (MPN)GDB3071
OE part numbers00491-87727, 00491-87727-000, 04491-87724, 04491-87725, 04491-87725-000, 04491-87727, 04491-87727-000, 04491-87728, 04491-87728-000, 04491-87731-000, 449187724, 449187725, 449187727, 449187728
Compatibility check

Loading vehicle data…

Please wait while we load vehicle compatibility information.
Description and what's included

TRW gdb3071 Brake pad set. Height [mm]: 45,3 mm. Manufacturer Restriction: AKEBONO. Test Mark: E9 90R 01107/240. Thickness [mm]: 16,3 mm. Wear Warning Contact: 4. Width [mm]: 125,8 mm

What's included:
  • 1x Set of brake pads (axle set)
  • Wear indicator wire (where applicable)
  • Mounting accessories (where applicable)
Shipping, returns, warranty

Free UK delivery on orders over £99.00. Express and standard shipping available.

  • Standard delivery: 2-5 business days
  • Express delivery: 1-2 business days
  • Free returns within 14 days
  • All parts backed by manufacturer warranty

Warranty: 12-month manufacturer warranty on all parts. 14-day money-back guarantee if the part doesn't fit your vehicle.

Frequently Asked Questions

Is this Brake pad set compatible with my car?

This Brake pad set fits DAIHATSU vehicles. Use the vehicle selector at the top of the page to check exact compatibility — enter your car's make, model, and engine for a confirmed fitment match. All fitment data is verified through TecDoc.

What specifications does this TRW Brake pad set have?

This TRW Brake pad set has the following specifications: Manufacturer Restriction: AKEBONO; Thickness [mm]: 16,3 mm; Test Mark: E9 90R 01107/240; Width [mm]: 125,8 mm; Height [mm]: 45,3 mm; Wear Warning Contact: 4. Check the full specifications table above for complete details.

What OE part numbers does this Brake pad set replace?

This Brake pad set replaces OE part numbers: 00491-87727, 00491-87727-000, 04491-87724, 04491-87725, 04491-87725-000, 04491-87727, 04491-87727-000, 04491-87728 and 6 more. Cross-reference these numbers with your vehicle's original part number to confirm compatibility.

How much does a Brake pad set cost?

This TRW Brake pad set is available for £30.99. Brake pad set prices vary depending on brand, specifications, and vehicle compatibility. TRW parts offer a balance of quality and value, backed by our 14-day money-back guarantee.

How do I know when to replace my Brake pad set?

Common signs include squealing or grinding noises when braking, increased stopping distances, brake pedal vibration, or a dashboard warning light. Most brake pads should be inspected every 20,000 miles and replaced when pad thickness falls below 3mm.

What tools do I need to replace a Brake pad set?

Tools needed: floor jack and axle stands, lug wrench or 19mm socket, brake caliper wind-back tool (or C-clamp), 7mm hex / Torx socket for caliper bolts, brake cleaner spray, copper grease, torque wrench. Difficulty: Moderate DIY. Safety warning: Never compress the caliper piston without checking the brake fluid reservoir level will not overflow; brake fluid is corrosive -- keep it off painted surfaces and skin.

Can I use this part as a replacement for OE 00491-87727?

Yes, this TRW Brake pad set is a direct replacement for OE part number 00491-87727. It is manufactured to meet or exceed original equipment specifications, ensuring proper fitment and performance. All cross-reference data is verified through TecDoc.

Related categories