Skip to main content
CP247
Gallery
BrandTRW
MPNGDB1764
OE refs2
SKU0161-GDB1764
GTIN / EAN3322937883431

Similar products

Customers also bought

Doing a front brake service?

Get all 2 parts in one click with our pre-assembled kit.

View kit

Details

SpecificationValue
BrandTRW
MPNgdb1764
CategoryBrake pad set
Manufacturer RestrictionBREMBO
Thickness [mm]17 mm
Test MarkE9 90R - 01107/1213
Width [mm]176 mm
Height [mm]109.6 mm

OE numbers (2)

Search by this OE number to find compatible parts

Where this part fits

Original-fit position for OE 95535193950. The red ring marks where this part installs on the vehicle.

1 set of brake pads for disk brake comprising: Brake lining also use: Fasteners D >> - MJ 2008 Discontinued part — Cayenne Cayenne 9PA Facelift (2007–2010) — Disc brake Front axle
Cayenne Cayenne 9PA Facelift (2007–2010) · Disc brake Front axlePosition 6

About this product

TRW brake pads (GDB1764) deliver consistent stopping power through a friction compound engineered for low noise, reduced brake dust, and stable bite across a wide temperature range. The pad compound characteristics — Manufacturer Restriction: BREMBO, Thickness [mm]: Fibreglass mm, Test Mark: E9 90R - 01107/1213, Width [mm]: 176 mm — are selected to balance progressive pedal feel with minimal wear on mating discs. Designed as a direct replacement for PORSCHE applications, these pads slot into the original caliper bracket without modification. Cross-references OE part numbers: 05P1966, 0 986 424 073, 0 986 TB2 924, 114000 and 26 more. TRW brake friction products are validated in independent dynamometer tests and are used by authorised service centres throughout Europe. Brake pads typically need replacing every 25,000–50,000 miles, depending on driving style, vehicle weight, and whether you drive mostly in urban stop-start traffic or on open roads. Watch for squealing or grinding noises when braking, increased stopping distances, a pulsating brake pedal, or a brake warning light on your dashboard — any of these signals that the friction material is worn to its minimum thickness. Brake pad replacement is a moderate DIY job requiring basic hand tools, a jack, and axle stands — allow approximately 1–2 hours per axle for a first-time installer, less if you have experience with caliper removal. When choosing brake pads, look for ECE R90 approval (mandatory for road use in Europe), copper-free formulations for environmental compliance, and a shim or anti-squeal backing plate for quiet operation. Replacing brake pads promptly prevents scoring and heat damage to the more expensive brake discs, saving significantly on repair costs in the long run. Every part is dispatched with tracked delivery and a 14-day money-back guarantee with hassle-free returns.

Brake pad set buying guide

Why replace this part?

Brake pads are the primary friction component in your braking system. As they wear thin, braking performance deteriorates, increasing stopping distances and putting your safety at risk. Worn pads can also damage brake discs, leading to more expensive repairs.

Signs you need a replacement

  • Squealing or grinding noises when braking
  • increased stopping distances
  • brake pedal vibration or pulsation
  • dashboard warning light
  • visible pad thickness below 3mm
  • pulling to one side when braking

When to replace

Every 30,000–70,000 miles depending on driving conditions, pad material, and vehicle weight. City driving with frequent stops wears pads faster than motorway driving.

Installation difficulty:Moderate — requires basic tools and mechanical knowledge

About TRW

TRW Automotive, with roots dating back to 1901 in Cleveland, USA, is a global leader in safety-critical automotive components, now part of ZF Friedrichshafen. TRW specialises in brake pads, brake discs, steering components, suspension parts, and engine valves. As an OE supplier to virtually all major global car manufacturers, TRW products meet the highest safety and performance standards. Trusted by vehicle makers for over a century, TRW delivers braking and steering components that prioritise safety without compromise.

Suitable cars

Equivalent products (29)

Show all 29 OE numbers
APECPAD1483
ATE13046048402
BORG & BECKBBP2476
BOSCH0 986 TB2 924
BREMBOP65016
BREMBOP65016N
FRAS-LEPD/1450
FTE9001463
FTE9011365£87.99
FTEBL1996A2
HELLA8DB 355 011-011
HELLA PAGID8DB 355 011-011
LPR05P1966
LUCASLBP1859
MINTEXMDB2741
NK225610
PAGIDT1414
PAGIDT2741
REMSA114000
ROADHOUSE21140.00
SWAG38 11 6176
TEXTAR2396117004
TRISCAN811020003
VALEO598709

Brake pad set TRW GDB1764compatible car models

Car modelsPORSCHE: CAYENNE (9PA)
EnginesTurbo 4.5
Year of manufacture2002-2010
Manufacturer article number (MPN)GDB1764
OE part numbers955 351 939 50, 955 351 939 51
Compatibility check

Loading vehicle data…

Please wait while we load vehicle compatibility information.
Description and what's included

TRW gdb1764 COTEC. Braking System: 79. Braking System: 80. Height [mm]: 109,6 mm. Manufacturer Restriction: BREMBO. Test Mark: E9 90R - 01107/1213. Thickness [mm]: 17 mm. Wear Warning Contact: 1. Width [mm]: 176 mm

What's included:
  • 1x Set of brake pads (axle set)
  • Wear indicator wire (where applicable)
  • Mounting accessories (where applicable)
Shipping, returns, warranty

Free UK delivery on orders over £99.00. Tracked standard shipping.

  • Standard delivery: 5–9 business days
  • Order before 5pm — ships the next working day
  • Free returns within 14 days
  • All parts backed by manufacturer warranty

Warranty: 12-month manufacturer warranty on all parts. 14-day money-back guarantee if the part doesn't fit your vehicle.

Frequently Asked Questions

Is this Brake pad set compatible with my car?

This Brake pad set fits PORSCHE vehicles. Use the vehicle selector at the top of the page to check exact compatibility — enter your car's make, model, and engine for a confirmed fitment match. All fitment data is verified through TecDoc.

What specifications does this TRW Brake pad set have?

This TRW Brake pad set has the following specifications: Manufacturer Restriction: BREMBO; Thickness [mm]: 17 mm; Test Mark: E9 90R - 01107/1213; Width [mm]: 176 mm; Height [mm]: 109,6 mm; Wear Warning Contact: 1. Check the full specifications table above for complete details.

What OE part numbers does this Brake pad set replace?

This Brake pad set replaces OE part numbers: 955 351 939 50, 955 351 939 51. Cross-reference these numbers with your vehicle's original part number to confirm compatibility.

How much does a Brake pad set cost?

This TRW Brake pad set is available for £65.99. Brake pad set prices vary depending on brand, specifications, and vehicle compatibility. TRW parts offer a balance of quality and value, backed by our 14-day money-back guarantee.

How do I know when to replace my Brake pad set?

Common signs include squealing or grinding noises when braking, increased stopping distances, brake pedal vibration, or a dashboard warning light. Most brake pads should be inspected every 20,000 miles and replaced when pad thickness falls below 3mm.

What tools do I need to replace a Brake pad set?

Tools needed: floor jack and axle stands, lug wrench or 19mm socket, brake caliper wind-back tool (or C-clamp), 7mm hex / Torx socket for caliper bolts, brake cleaner spray, copper grease, torque wrench. Difficulty: Moderate DIY. Safety warning: Never compress the caliper piston without checking the brake fluid reservoir level will not overflow; brake fluid is corrosive -- keep it off painted surfaces and skin.

Can I use this part as a replacement for OE 955 351 939 50?

Yes, this TRW Brake pad set is a direct replacement for OE part number 955 351 939 50. It is manufactured to meet or exceed original equipment specifications, ensuring proper fitment and performance. All cross-reference data is verified through TecDoc.

Related categories