Skip to main content
CP247
Gallery
BrandTRW
MPNGDB1422
OE refs8
SKU0161-GDB1422
GTIN / EAN3322937278213

Similar products

Customers also bought

Doing a front brake service?

Get all 2 parts in one click with our pre-assembled kit.

View kit

Details

SpecificationValue
BrandTRW
MPNgdb1422
CategoryBrake pad set
Manufacturer RestrictionATE
Thickness [mm]19.3 mm
Test MarkE9 90R 027004
Width [mm]146 mm
Height [mm]54.7 mm

OE/OEM numbers (8)

Search by this OE number to find compatible parts

Where this part fits

Original-fit position for OE 1J0698151D. The red ring marks where this part installs on the vehicle.

1 set: brake pads with wear indicator for disc brake — Polo Polo/Vento/Classic-IND (Typ 9N) (2005–2008) — Floating caliper brake Brake caliper housing Brake disc (vented) for models with power steering
Polo Polo/Vento/Classic-IND (Typ 9N) (2005–2008) · Floating caliper brake Brake caliper housing Brake disc (vented) for models with power steeringPosition 15

About this product

TRW brake pads (GDB1422) deliver consistent stopping power through a friction compound engineered for low noise, reduced brake dust, and stable bite across a wide temperature range. The pad compound characteristics — Manufacturer Restriction: ATE, Thickness [mm]: Synthetic, Cast Iron mm, Test Mark: E9 90R 027004, Width [mm]: 146 mm — are selected to balance progressive pedal feel with minimal wear on mating discs. Designed as a direct replacement for AUDI, SEAT, SKODA, VW applications, these pads slot into the original caliper bracket without modification. Cross-references OE part numbers: 025 231 3119/PD, 025 231 3119/W, 05P692, 063341 and 44 more. TRW brake friction products are validated in independent dynamometer tests and are used by authorised service centres throughout Europe. Brake pads typically need replacing every 25,000–50,000 miles, depending on driving style, vehicle weight, and whether you drive mostly in urban stop-start traffic or on open roads. Watch for squealing or grinding noises when braking, increased stopping distances, a pulsating brake pedal, or a brake warning light on your dashboard — any of these signals that the friction material is worn to its minimum thickness. Brake pad replacement is a moderate DIY job requiring basic hand tools, a jack, and axle stands — allow approximately 1–2 hours per axle for a first-time installer, less if you have experience with caliper removal. When choosing brake pads, look for ECE R90 approval (mandatory for road use in Europe), copper-free formulations for environmental compliance, and a shim or anti-squeal backing plate for quiet operation. Replacing brake pads promptly prevents scoring and heat damage to the more expensive brake discs, saving significantly on repair costs in the long run. Every part is dispatched from our UK warehouse with a 30-day money-back guarantee and free hassle-free returns.

Brake pad set buying guide

Why replace this part?

Brake pads are the primary friction component in your braking system. As they wear thin, braking performance deteriorates, increasing stopping distances and putting your safety at risk. Worn pads can also damage brake discs, leading to more expensive repairs.

Signs you need a replacement

  • Squealing or grinding noises when braking
  • increased stopping distances
  • brake pedal vibration or pulsation
  • dashboard warning light
  • visible pad thickness below 3mm
  • pulling to one side when braking

When to replace

Every 30,000–70,000 miles depending on driving conditions, pad material, and vehicle weight. City driving with frequent stops wears pads faster than motorway driving.

Installation difficulty:Moderate — requires basic tools and mechanical knowledge

About TRW

TRW Automotive, with roots dating back to 1901 in Cleveland, USA, is a global leader in safety-critical automotive components, now part of ZF Friedrichshafen. TRW specialises in brake pads, brake discs, steering components, suspension parts, and engine valves. As an OE supplier to virtually all major global car manufacturers, TRW products meet the highest safety and performance standards. Trusted by vehicle makers for over a century, TRW delivers braking and steering components that prioritise safety without compromise.

Suitable cars

Equivalent products (40)

Show all 40 OE numbers
A.B.S.37155
AISINBPVW-1009
ATE13046071172
ATE13047071172
BENDIX571971B
BOSCH0 986 424 503
BOSCH0 986 494 525
BOSCH0 986 495 048
BOSCH0 986 TB2 041
BOSCH0 986 TB2 314
BOSCH986424503
BOSCHF 03B 150 285
FERODOFDB1398-D
FERODOFDB5027
FIRST LINEFBP3242
FIRST LINEFBP3244
FTEBL1614A2
GALFERB1G10204632
GIRLING6114225
LPR05P692£32.99
METELLI2202112
MEYLE025 231 3119/PD
MEYLE025 231 3119/W
MINTEXMDB2040
NK224745
OPTIMALBP-12079
PAGIDT1163
REMSA063341
REMYRAP1003
ROADHOUSE2633.41
SWAG30916446
TEXTAR2313119705
VALEO598968
VALEO601120

Brake pad set TRW GDB1422compatible car models

Car modelsAUDI: A2 (8Z0), A3 (8L1), A3 (8P1), A3 Sportback (8PA); SEAT: ALTEA (5P1), LEON (1P1), TOLEDO III (5P2); SKODA: FABIA I Combi (6Y5), FABIA I Praktik (6Y5), FABIA I Saloon (6Y3), OCTAVIA I Combi (1U5), OCTAVIA I Estate Van (1U5), OCTAVIA II Combi (1Z5), ROOMSTER (5J7), ROOMSTER Praktik (5J); VW: BEETLE (5C1, 5C2), BEETLE Convertible (5C7, 5C8), BORA (9M2), BORA I (1J2), BORA Variant (1J6), CADDY III Box Body/MPV (2KA, 2KH, 2CA, 2CH), CADDY III MPV (2KB, 2KJ, 2CB, 2CJ), GOLF Hatchback Van (1K1), GOLF IV (1J1), GOLF IV Van (1J1) (+5 more)
Engines1.4 TDI; 1.6; 1.2 TSI; 1.4 16V; 1.2; 1.4; 1.9 D; 2.0; TDI; 1.9 SDI; 1.2 TSi
Year of manufacture1996-2019
Manufacturer article number (MPN)GDB1422
OE part numbers1J0 698 151 D, 1J0 698 151 E, 1J0 698 151 F, 1J0 698 151 G, 1J0698151P, 1K0 698 151 A, 1K0 698 151 D, 1K0 698 151 M
Compatibility check

Loading vehicle data…

Please wait while we load vehicle compatibility information.
Description and what's included

TRW gdb1422 Brake pad set. Height [mm]: 54,7 mm. Manufacturer Restriction: ATE. Test Mark: E9 90R 027004. Thickness [mm]: 19,3 mm. Wear Warning Contact: 0. Width [mm]: 146 mm

What's included:
  • 1x Set of brake pads (axle set)
  • Wear indicator wire (where applicable)
  • Mounting accessories (where applicable)
Shipping, returns, warranty

Free UK delivery on orders over £99.00. Express and standard shipping available.

  • Standard delivery: 2-5 business days
  • Express delivery: 1-2 business days
  • Free returns within 14 days
  • All parts backed by manufacturer warranty

Warranty: 12-month manufacturer warranty on all parts. 14-day money-back guarantee if the part doesn't fit your vehicle.

Frequently Asked Questions

Is this Brake pad set compatible with my car?

This Brake pad set fits AUDI, SEAT, SKODA, VW vehicles. Use the vehicle selector at the top of the page to check exact compatibility — enter your car's make, model, and engine for a confirmed fitment match. All fitment data is verified through TecDoc.

What specifications does this TRW Brake pad set have?

This TRW Brake pad set has the following specifications: Manufacturer Restriction: ATE; Thickness [mm]: 19,3 mm; Test Mark: E9 90R 027004; Width [mm]: 146 mm; Height [mm]: 54,7 mm; Wear Warning Contact: 0. Check the full specifications table above for complete details.

What OE part numbers does this Brake pad set replace?

This Brake pad set replaces OE part numbers: 1J0 698 151 D, 1J0 698 151 E, 1J0 698 151 F, 1J0 698 151 G, 1J0698151P, 1K0 698 151 A, 1K0 698 151 D, 1K0 698 151 M. Cross-reference these numbers with your vehicle's original part number to confirm compatibility.

How much does a Brake pad set cost?

Brake pad set prices vary depending on brand, specifications, and vehicle compatibility. Check the current price above for this TRW Brake pad set. All parts come with our 14-day money-back guarantee.

How do I know when to replace my Brake pad set?

Common signs include squealing or grinding noises when braking, increased stopping distances, brake pedal vibration, or a dashboard warning light. Most brake pads should be inspected every 20,000 miles and replaced when pad thickness falls below 3mm.

What tools do I need to replace a Brake pad set?

Tools needed: floor jack and axle stands, lug wrench or 19mm socket, brake caliper wind-back tool (or C-clamp), 7mm hex / Torx socket for caliper bolts, brake cleaner spray, copper grease, torque wrench. Difficulty: Moderate DIY. Safety warning: Never compress the caliper piston without checking the brake fluid reservoir level will not overflow; brake fluid is corrosive -- keep it off painted surfaces and skin.

Can I use this part as a replacement for OE 1J0 698 151 D?

Yes, this TRW Brake pad set is a direct replacement for OE part number 1J0 698 151 D. It is manufactured to meet or exceed original equipment specifications, ensuring proper fitment and performance. All cross-reference data is verified through TecDoc.

Related categories