Skip to main content
CP247
Clutch Kit SRLine S33-042 — no image available

No product images available

Specs, fitment data and pricing remain accurate.
BrandSRLine
MPNS33-042
OE refs2
SKU5258-S33-042
GTIN / EAN5901532376708

Similar products

Customers also bought

Doing a clutch replacement?

Get all 2 parts in one click with our pre-assembled kit.

View kit

Details

SpecificationValue
BrandSRLine
MPNs33-042
Extention Force [N]4500 N
Outer Diameter [mm]215 mm

OE numbers (2)

Search by this OE number to find compatible parts

About this product

SRLine clutch kit (S33-042) restores clean gear changes and full torque transfer by replacing the friction disc, pressure plate, and release bearing as a matched assembly — eliminating the judder and slip that worn components cause. The assembly is rated for Number of Teeth: 20, Extention Force [N]: 4500 N, Outer Diameter [mm]: 215 mm, Supplementary Article/Supplementary Info: 211, with the friction disc compound chosen to match the torque output of the engine and resist glazing under the stop-start urban driving cycles where clutches wear fastest. Spline count, disc diameter, and diaphragm spring load are matched to the gearbox input shaft on MITSUBISHI, PROTON models for a bolt-on installation requiring no machining of the flywheel face. Replaces OE clutch references: 10530, 133015, 3000262001, 3000482001 and 59 more. SRLine drivetrain components are dynamometer-verified for torque capacity before leaving the factory and are supplied with installation lubricant and alignment tools in the kit. Clutch lifespan varies widely — from 30,000 miles in heavy urban traffic to 100,000+ miles with smooth driving habits — but any manual-gearbox vehicle will eventually need a clutch replacement. Common symptoms of clutch wear include a slipping clutch (engine revs rising without a corresponding increase in speed), a biting point that has moved high in the pedal travel, judder when pulling away, and difficulty selecting gears. Clutch replacement is a significant job that requires gearbox removal — most DIY mechanics will need a transmission jack, an engine support bar, and a full set of sockets; allow a full day for the work. Always replace the complete clutch kit (disc, pressure plate, and release bearing) together — fitting only one component means the gearbox must be removed again when the remaining parts wear out shortly afterwards. Addressing clutch slip early prevents flywheel damage from overheating — a resurfaced or replaced flywheel adds substantial cost to a job that is already labour-intensive, so prompt replacement saves money. Every part is dispatched with tracked delivery and a 14-day money-back guarantee with hassle-free returns.

Clutch Kit buying guide

Why replace this part?

The clutch transfers engine power to the transmission. A worn clutch slips under load, makes gear changes difficult, and can eventually leave you stranded. Complete clutch kits include the disc, pressure plate, and release bearing for a comprehensive repair.

Signs you need a replacement

  • Difficulty shifting gears
  • burning smell when driving
  • clutch pedal feels soft or sticky
  • engine revs increase without acceleration (slipping)
  • unusual noises when pressing the clutch pedal

When to replace

Typically 60,000–100,000 miles, but highly variable based on driving style. City driving and towing wear clutches faster.

Installation difficulty:Professional — we recommend workshop fitting

Suitable cars

Equivalent products (62)

Show all 62 OE numbers
ACDelcoAC337K
AISINKM-021
AISINKM021
AISINKM-021V
AISINKM021V
AISINKM-026
AISINKM026
AISINKM-026A
AISINKM026A
AISINKM-035A
AISINKM035A
AISINKY007
ASHIKA9205548
BORG & BECKHK9295
EXEDYMBK2041£154.99
HERTH+BUSS ELPARTSJ2005014
HERTH+BUSS ELPARTSJ2005017
HERTH+BUSS ELPARTSJ2005018
HERTH+BUSS ELPARTSJ2005032
HERTH+BUSS JAKOPARTSJ2005014
JAPANPARTSKF-563
JAPKO92563
MAPCO10530
NIPPARTSJ2005037
NIPPARTSJ2005038
NK133015
QUINTON HAZELLQKT1444AF
QUINTON HAZELLQKT1679AF
QUINTON HAZELLQKT1969AF
SACHS3000262001
SACHS3000482001
SACHS3000593001
SACHS3000851701
SACHS3000854701
SACHS3000951719
SACHS4000171001
SACHS4000186001
SACHS4000189001
SACHS4000201001
SACHS4000754001
SACHS4000791001
Schaeffler LuK622 0571 60
Schaeffler LuK622057160
Schaeffler LuK622092060
Schaeffler LuK622092660
Schaeffler LuK622 1855 60
Schaeffler LuK622185560
Schaeffler LuK622 1856 60
Schaeffler LuK622185660
Schaeffler LuK622 1858 60
Schaeffler LuK622185860
Schaeffler LuK622186260
Schaeffler LuK622 1865 60
Schaeffler LuK622186560
VALEOMBK-009
VALEOMBK009

Clutch Kit SRLine S33-042compatible car models

Car modelsMITSUBISHI: CARISMA (DA), CARISMA Saloon (DA), COLT II (C1A), COLT III (C5A), COLT IV (CAA), ECLIPSE I (D2A), ECLIPSE II (D3A), GALANT V (E1A), GALANT VI (E3A), GALANT VII (E5A, E7A, E8A) (+12 more); PROTON: PERSONA 400 (C9S), PERSONA 400 Hatchback (C9C, C9S)
Engines1.8 16V GDI (DA2A); 1.6 Turbo ECi (C13A); 1.8 GTi 16V Cat (C58A); 1.6 4WD (CC4A); 2.0 i 16V 4WD (D22A, D27A); 2000 GS 16V (D32A); 2.0 GLS (E15A); 2.0 4WD (E33A, E38A, E39A); 1.8 (E52A); 2.0 (EA2A); 2.0 (EA2W); 2.0 4WD (E39A, E38A, E33A); 1.8 4WD (C37V); 1.8 GTi 16V (C68A); 1.6 16V 4WD (CD4A) (+6 more)
Year of manufacture1982-2008
Manufacturer article number (MPN)S33-042
OE part numbersRL210104, RL210108
Compatibility check

Loading vehicle data…

Please wait while we load vehicle compatibility information.
Description and what's included

SRLine s33-042 . Extention Force [N]: 4500 N. Number of Teeth: 20. Outer Diameter [mm]: 215 mm. Supplementary Article/Info 2: 404. Supplementary Article/Info 2: 523. Supplementary Article/Supplementary Info: 211

What's included:
  • 1x Clutch disc
  • 1x Pressure plate
  • 1x Release bearing
Shipping, returns, warranty

Free UK delivery on orders over £99.00. Tracked standard shipping.

  • Standard delivery: 5–9 business days
  • Order before 5pm — ships the next working day
  • Free returns within 14 days
  • All parts backed by manufacturer warranty

Warranty: 12-month manufacturer warranty on all parts. 14-day money-back guarantee if the part doesn't fit your vehicle.

Frequently Asked Questions

Is this Clutch Kit compatible with my car?

This Clutch Kit fits MITSUBISHI, PROTON vehicles. Use the vehicle selector at the top of the page to check exact compatibility — enter your car's make, model, and engine for a confirmed fitment match. All fitment data is verified through TecDoc.

What specifications does this SRLine Clutch Kit have?

This SRLine Clutch Kit has the following specifications: Number of Teeth: 20; Extention Force [N]: 4500 N; Outer Diameter [mm]: 215 mm; Supplementary Article/Supplementary Info: 211; Supplementary Article/Info 2: 523; Supplementary Article/Info 2: 404. Check the full specifications table above for complete details.

What OE part numbers does this Clutch Kit replace?

This Clutch Kit replaces OE part numbers: RL210104, RL210108. Cross-reference these numbers with your vehicle's original part number to confirm compatibility.

How much does a Clutch Kit cost?

Clutch Kit prices vary depending on brand, specifications, and vehicle compatibility. Check the current price above for this SRLine Clutch Kit. All parts come with our 14-day money-back guarantee.

How do I know when to replace my Clutch Kit?

Signs include difficulty shifting gears, a burning smell, the clutch pedal feeling soft or sticky, slipping under load, or unusual noises when pressing the clutch pedal.

What tools do I need to replace a Clutch Kit?

Tools needed: gearbox jack or transmission support, complete socket and spanner set (10-19mm), clutch alignment tool (usually included in kit), flywheel locking tool (vehicle-specific), torque wrench, clutch grease for input shaft splines. Difficulty: Professional recommended. Safety warning: Clutch dust from older components may contain asbestos -- wear an approved dust respirator and use clutch cleaner spray rather than compressed air. The gearbox must be fully supported before unbolting from the engine.

Can I use this part as a replacement for OE RL210104?

Yes, this SRLine Clutch Kit is a direct replacement for OE part number RL210104. It is manufactured to meet or exceed original equipment specifications, ensuring proper fitment and performance. All cross-reference data is verified through TecDoc.

Related categories