Skip to main content
CP247
CV joint Schaeffler FAG 770 0020 10 — no image available

No product images available

Specs, fitment data and pricing remain accurate.
BrandSchaeffler FAG
MPN770 0020 10
OE refs3
SKU0192-770 0020 10
GTIN / EAN4014870392925

Similar products

Customers also bought

Details

SpecificationValue
BrandSchaeffler FAG
CategoryCV joint
Sealing Ring Diameter [mm]60 mm
Outer Diameter [mm]98 mm

OE/OEM numbers (3)

Search by this OE number to find compatible parts

Where this part fits

Original-fit position for OE 701498340X. The red ring marks where this part installs on the vehicle.

Outer joint with assembly parts F >> 70-R-136 290 also use: — Transporter  EuroVan T4 (1992–2004) — Drive shaft for manual gearbox
Transporter EuroVan T4 (1992–2004) · Drive shaft for manual gearboxPosition 23

About this product

Schaeffler FAG CV joint (770 0020 10) transmits drive torque through full suspension travel and steering lock without generating vibration or noise, using a hardened-steel ball-and-cage design packed with high-temperature lithium-complex grease. Joint specification — External Toothing wheel side: 38, Internal Toothing wheel side: 33, Sealing Ring Diameter [mm]: 60 mm, Outer Diameter [mm]: 98 mm — determines the operating angle range and torque rating required to handle both the engine's peak output and the lateral forces generated in tight cornering manoeuvres. Spline count, joint diameter, and boot clamp positions are sized for the driveshaft on VW applications; the included gaiter and grease pack mean no additional parts are needed for installation. Cross-references OE driveshaft references: 15-0123, 150123, 3213, 701 407 321 B and 6 more. Schaeffler FAG CV joints are heat-treated and individually inspected for spline geometry before dispatch, matching the articulation angles and service life of the original manufacturer component. CV joints can last the lifetime of the vehicle if the protective rubber gaiter remains intact — but once the boot splits and grease escapes, the exposed joint deteriorates rapidly and typically fails within a few thousand miles. The classic warning sign is a rhythmic clicking or knocking noise when turning at low speed (especially in full lock), caused by worn ball tracks in the outer CV joint — inner joints tend to produce a clunking or vibration under acceleration. CV joint replacement is a moderate-to-advanced DIY job requiring a hub puller or slide hammer, circlip pliers, and a torque wrench — outer joints can often be replaced without removing the entire driveshaft, saving considerable time. When selecting a CV joint, ensure the spline count and ABS ring tooth count match the original — an incorrect ABS ring will trigger traction control and stability system faults. Replacing a worn CV joint promptly avoids the risk of sudden driveshaft failure — a seized or broken joint can lock a wheel while driving, creating a serious safety hazard. Every part is dispatched from our UK warehouse with a 30-day money-back guarantee and free hassle-free returns.

CV joint buying guide

Why replace this part?

CV joints transfer drive from the transmission to the wheels while accommodating suspension movement and steering angles. A worn CV joint can cause vibration, clicking noises, and ultimately complete loss of drive.

Signs you need a replacement

  • Clicking or popping noises during turns
  • vibration during acceleration
  • grease visible on the inside of the wheel
  • torn CV boot
  • clunking when shifting between drive and reverse

When to replace

Replace when CV boot tears or symptoms appear. CV joints can last the life of the vehicle if the boot remains intact.

Installation difficulty:Professional — we recommend workshop fitting

Suitable cars

Equivalent products (4)

GLO3213
METELLI15-0123
METELLI150123
RUVILLE75411

CV joint Schaeffler FAG 770 0020 10compatible car models

Car modelsVW: TRANSPORTER T4 Bus (70B, 70C, 7DB, 7DK, 70J, 70K, 7DC, 7DJ), TRANSPORTER T4 Platform/Chassis (70E, 70L, 70M, 7DE, 7DL, 7D, TRANSPORTER T4 Van (70A, 70H, 7DA, 7DH)
Engines1.8; 1.9 D
Year of manufacture1990-2004
Manufacturer article number (MPN)770 0020 10
OE part numbers701 407 321 B, 701 498 099, 701 498 340 X
Compatibility check

Loading vehicle data…

Please wait while we load vehicle compatibility information.
Description and what's included

Schaeffler FAG 770002010 CV joint. External Toothing wheel side: 38. Internal Toothing wheel side: 33. Joint Type: 3. Outer Diameter [mm]: 98 mm. Sealing Ring Diameter [mm]: 60 mm

What's included:
  • 1x CV joint
  • 1x CV boot kit (where applicable)
Shipping, returns, warranty

Free UK delivery on orders over £99.00. Express and standard shipping available.

  • Standard delivery: 2-5 business days
  • Express delivery: 1-2 business days
  • Free returns within 14 days
  • All parts backed by manufacturer warranty

Warranty: 12-month manufacturer warranty on all parts. 14-day money-back guarantee if the part doesn't fit your vehicle.

Frequently Asked Questions

Is this CV joint compatible with my car?

This CV joint fits VW vehicles. Use the vehicle selector at the top of the page to check exact compatibility — enter your car's make, model, and engine for a confirmed fitment match. All fitment data is verified through TecDoc.

What specifications does this Schaeffler FAG CV joint have?

This Schaeffler FAG CV joint has the following specifications: External Toothing wheel side: 38; Internal Toothing wheel side: 33; Sealing Ring Diameter [mm]: 60 mm; Outer Diameter [mm]: 98 mm; Joint Type: 3. Check the full specifications table above for complete details.

What OE part numbers does this CV joint replace?

This CV joint replaces OE part numbers: 701 407 321 B, 701 498 099, 701 498 340 X. Cross-reference these numbers with your vehicle's original part number to confirm compatibility.

How much does a CV joint cost?

This Schaeffler FAG CV joint is available for £22.99. CV joint prices vary depending on brand, specifications, and vehicle compatibility. Schaeffler FAG parts offer a balance of quality and value, backed by our 14-day money-back guarantee.

How do I know when to replace my CV joint?

Signs include clicking or popping noises during turns, vibration during acceleration, or grease leaking from a torn CV boot.

What tools do I need to replace a CV joint?

Tools needed: floor jack, axle stands, CV boot clamp pliers (or band clamp tool), hub nut socket (30-36mm), torque wrench, CV grease (supplied with kit), new band clamps. Difficulty: Moderate DIY. Safety warning: Ensure the inner and outer joints are fully packed with the supplied grease before assembly -- dry CV joints fail rapidly under load and can cause sudden loss of drive.

Can I use this part as a replacement for OE 701 407 321 B?

Yes, this Schaeffler FAG CV joint is a direct replacement for OE part number 701 407 321 B. It is manufactured to meet or exceed original equipment specifications, ensuring proper fitment and performance. All cross-reference data is verified through TecDoc.

Related categories