- EAN
- 5038206292382
£50.99
In stock
Original equipment numberMITSUBISHI
Timing Belt Kit, OE MD329625 (MITSUBISHI). 13 compatible equivalents from 8 brands, 11 of them in stock. Prices from £50.99 to £95.99. Fits MITSUBISHI, HYUNDAI, KIA and 8 more makes.
SKF VKMA 95010£57.99
SKF VKMA 95014£58.99
BGA TB6100K£50.99
Manufacturers list each of these parts against OE MD329625. The cheapest ones in stock come first; the full list follows, sorted by price.
UK delivery £5.99, free over £50 · We also ship from the EU to 200 countries, with no customs charges within the EU — see prices and times
Your car
Choose your car and we will mark the parts that fit it.
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
All 13 equivalents for OE MD329625: in stock with a photo first, then in stock, then the ones with a supplier price. The extra columns show only the specifications that differ between these parts.
| Brand | Number | Width 1 [mm] | Number of Teeth 2 | Number of Teeth 1 | Price | Availability |
|---|---|---|---|---|---|---|
| BGA | TB6100K | — | — | — | £50.99 | In stock |
| SKF | VKMA 95010 | 19 mm | 163 | 83 | £57.99 | In stock |
| SKF | VKMA 95014 | 25,4 mm | 99 | 163 | £58.99 | In stock |
| JAPKO | KJTM01 | 25 mm | 83 | 163 | £59.99 | In stock |
| SNR | KD473.00 | 25 mm | 83 | — | £60.99 | In stock |
| Schaeffler INA | 530 0053 10 | 25,4 mm | 83 | 163 | £61.99 | In stock |
| Schaeffler INA | 530 0109 10 | 25,4 mm | 99 | 163 | £67.99 | In stock |
| ASHIKA | KCTM01 | 25 mm | 83 | 163 | £81.99 | In stock |
| ASHIKA | KCTM02 | 18,5 mm | 163 | 99 | £81.99 | In stock |
 HEPU | 20-1236 | — | — | — | £84.99 | In stock |
| SNR | KD473.01 | 25 mm | 163 | — | £84.99 | In stock |
| HEPU | 20-1235 | — | — | — | £75.99 | Out of stock |
 MAGNETI MARELLI | 341302460000 | — | — | — | £95.99 | Out of stock |
OE MD329625 is compatible with the following make/model combinations:
Years show when the model was built (TecDoc). Fit depends on engine and body, so check your car before you buy. Articles that fit left-hand-drive vehicles only are left out of this UK list.
Original installation position for OE MD329625. The red ring marks where this part installs on the vehicle.
OEM workshop diagram — sourced from manufacturer parts catalogue.
| Attribute | Value |
|---|---|
| Number of Teeth 1 | 104 |
| Number of Teeth 1 | 107 |
| Outer Diameter [mm] | 72 |
| Number of track rollers | 1 |
| Height [mm] | 24 |
| Number of Teeth | 112 |
| Number of Teeth | 114 |
| Width 1 [mm] | 15 |
| Number of Teeth | 195 |
| Number of Teeth | 91 |
Other original equipment numbers linked to MD329625. Each one leads to its own fitment and price page.
Only vehicle manufacturers' numbers are listed here. Other makers' equivalents are under “Compatible parts”.
Common original equipment numbers linked to replacement-part pages.