- Fitting Position
- Rear Right / Rear Left
- Length
- 80 mm
- Weight
- 0,170 kg
- EAN
- 4027816237150
£13.99
In stock
Original equipment number
Stabiliser bar link/coupling rod, OE EA0128170D. 9 compatible equivalents from 9 brands, 1 of them in stock. Prices from £11.99 to £23.99. Fits MAZDA, FIAT.
FEBI BILSTEIN 23715£13.99
Manufacturers list each of these parts against OE EA0128170D. The cheapest ones in stock come first; the full list follows, sorted by price.
UK delivery £5.99, free over £50 · We also ship from the EU to 200 countries, with no customs charges within the EU — see prices and times
Your car
Choose your car and we will mark the parts that fit it.
In stock
All 9 equivalents for OE EA0128170D: in stock with a photo first, then in stock, then the ones with a supplier price. The extra columns show only the specifications that differ between these parts.
| Brand | Number | Fitting Position | Length [mm] | Weight [kg] | Price | Availability |
|---|---|---|---|---|---|---|
| FEBI BILSTEIN | 23715 | Rear Right | 80 mm | 0,170 kg | £13.99 | In stock |
 HART | 417 239 | Rear Axle | — | — | £11.99 | Out of stock |
 SKF | VKDS 944009 | — | 80 mm | — | £12.99 | Out of stock |
 MERTZ | M-S1655 | Rear Left | 80 mm | — | £12.99 | Out of stock |
 KYB | KSLR4243 | Rear Axle | 113 mm | 0,215 kg | £13.99 | Out of stock |
 DELPHI | TC1574 | — | 80 mm | — | £12.99 | Out of stock |
 BLUE PRINT | ADM58514 | Rear Left | 109 mm | 0,306 kg | £13.99 | Out of stock |
 SIDEM | 51262 | Rear Axle | 80 mm | — | £18.99 | Out of stock |
 CORTECO | 49396300 | Rear Right | — | — | £23.99 | Out of stock |
OE EA0128170D is compatible with the following make/model combinations:
Years show when the model was built (TecDoc). Fit depends on engine and body, so check your car before you buy. Articles that fit left-hand-drive vehicles only are left out of this UK list.
Original installation position for OE EA0128170D. The red ring marks where this part installs on the vehicle.
OEM workshop diagram — sourced from manufacturer parts catalogue.
| Attribute | Value |
|---|---|
| Connecting thread | M10x1,25 |
| Inner Diameter [mm] | 12,2 |
| Pipe Diameter [mm] | 14 |
| Spanner Size | 16 |
| Weight [g] | 350 |
| Rod/Strut | 5 |
| Thread Size 1 | M10XP1.25 |
| Diameter 2 [mm] | 18 |
| Height [mm] | 95 |
| Length [mm] | 228 |
Other original equipment numbers linked to EA0128170D. Each one leads to its own fitment and price page.
Only vehicle manufacturers' numbers are listed here. Other makers' equivalents are under “Compatible parts”.
Aftermarket manufacturers cross-reference matching stabiliser bar, suspension to OE EA0128170D — verify fitment before ordering.
JAPKO · Stabiliser Bar, suspensionStabiliser Bar, suspension JAPKO 106317Rear Axle · 108 mm · 10X1,25 mm · 56 mm£10.99In stock
ASHIKA · Stabiliser Bar, suspensionStabiliser Bar, suspension ASHIKA 106-03-317Rear Axle · 108 mm · 10X1,25 mm · 56 mm£13.99Out of stockCommon original equipment numbers linked to replacement-part pages.