- Fitting Position
- Rear Side
- Length
- 160 mm
- EAN
- 5901225794154
In stock
Original equipment numberNISSAN
Drive shaft joint set, OE C9B11JD02B (NISSAN). 12 compatible equivalents from 12 brands, 10 of them in stock. Prices from £27.99 to £79.99. Fits NISSAN, NISSAN (DFAC).
GSP 841286£37.99
NTY NPZ-NS-082£37.99
DENCKERMANN C120400£31.99
Manufacturers list each of these parts against OE C9B11JD02B. The cheapest ones in stock come first; the full list follows, sorted by price.
UK delivery £5.99, free over £50 · We also ship from the EU to 200 countries, with no customs charges within the EU — see prices and times
Your car
Choose your car and we will mark the parts that fit it.
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
All 12 equivalents for OE C9B11JD02B: in stock with a photo first, then in stock, then the ones with a supplier price. The extra columns show only the specifications that differ between these parts.
| Brand | Number | Fitting Position | Length [mm] | Price | Availability |
|---|---|---|---|---|---|
| C120400 | Rear Side | 160 mm | £31.99 | In stock | |
| 841286 | — | 159,5 mm | £37.99 | In stock | |
| NPZ-NS-082 | Front Left | — | £37.99 | In stock | |
| 771 0613 30 | — | — | £40.99 | In stock | |
| 188614 | Rear Side | — | £42.99 | In stock | |
| 0210-J1016 | Rear Side | — | £51.99 | In stock | |
| ADBP890050 | Front Left | — | £59.99 | In stock | |
| VKJA 5813 | — | — | £69.99 | In stock | |
| 470 859 | — | 159,5 mm | £27.99 | In stock | |
| DP2110.10.1936 | — | 160 mm | £33.99 | In stock | |
| 62-01-1019 | Rear Side | — | £48.99 | Out of stock | |
| OJK68.002 | Front Left | 103 mm | £79.99 | Out of stock |
OE C9B11JD02B is compatible with the following make/model combinations:
Years show when the model was built (TecDoc). Fit depends on engine and body, so check your car before you buy. Articles that fit left-hand-drive vehicles only are left out of this UK list.
Original installation position for OE C9B11JD02B. The red ring marks where this part installs on the vehicle.

OEM workshop diagram — sourced from manufacturer parts catalogue.
| Attribute | Value |
|---|---|
| Internal Toothing differential side, conn. to transmission | 22 |
| Outer Diameter [mm] | 86 |
| Length 1 [mm] | 89 |
| Length [mm] | 124 |
| Length [mm] | 153,5 |
| Length [mm] | 161,5 |
| Length [mm] | 162,5 |
| Length [mm] | 181 |
| Outer Diameter [mm] | 79 |
| Length [mm] | 153 |
Other original equipment numbers linked to C9B11JD02B. Each one leads to its own fitment and price page.
Only vehicle manufacturers' numbers are listed here. Other makers' equivalents are under “Compatible parts”.
Common original equipment numbers linked to replacement-part pages.