- Length
- 491 mm
- EAN
- 5901219477858
£64.99
In stock
Original equipment numberSEAT
CV shaft, OE 7N0407763 (SEAT). 12 compatible equivalents from 11 brands, 8 of them in stock. Prices from £64.99 to £216.99. Fits VW, AUDI, SEAT and 15 more makes.
Dr!ve+ DP2110.10.0093£73.99
GSP 203295£99.99
HART 449 012£64.99
Manufacturers list each of these parts against OE 7N0407763. The cheapest ones in stock come first; the full list follows, sorted by price.
UK delivery £5.99, free over £50 · We also ship from the EU to 200 countries, with no customs charges within the EU — see prices and times
Your car
Choose your car and we will mark the parts that fit it.
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
All 12 equivalents for OE 7N0407763: in stock with a photo first, then in stock, then the ones with a supplier price. The extra columns show only the specifications that differ between these parts.
| Brand | Number | Length [mm] | Thread Size | Bore Diameter [mm] | Price | Availability |
|---|---|---|---|---|---|---|
| HART | 449 012 | 491 mm | — | — | £64.99 | In stock |
| Dr!ve+ | DP2110.10.0093 | 488 mm | M16x1.5 | — | £73.99 | In stock |
| GSP | 203295 | 491 mm | — | — | £99.99 | In stock |
| MAGNETI MARELLI | 302004190016 | 491 mm | — | — | £110.99 | In stock |
| SKF | VKJC 4592 | 486,5 mm | M16x1.5 | 10,5 mm | £122.99 | In stock |
| MEYLE | 100 498 0610 | 491 mm | — | — | £152.99 | In stock |
| KAMOKA | 5010544 | 491 mm | M16x1.5 | 10 mm | £73.99 | In stock |
| MAGNETI MARELLI | 302004190292 | 491 mm | — | — | £103.99 | In stock |
 FEBI BILSTEIN | 181276 | — | M16x1,5 | 10,6 mm | £81.99 | Out of stock |
 LPR | DS60859 | 488 mm | M16*1.5 | — | £94.99 | Out of stock |
 SNR | DK54.015 | 491 mm | M16x1,5 | — | £123.99 | Out of stock |
 LÖBRO | 305659 | 515 mm | M16x1.5 | 10,30 mm | £216.99 | Out of stock |
OE 7N0407763 is compatible with the following make/model combinations:
Years show when the model was built (TecDoc). Fit depends on engine and body, so check your car before you buy. Articles that fit left-hand-drive vehicles only are left out of this UK list.
Original installation position for OE 7N0407763. The red ring marks where this part installs on the vehicle.
OEM workshop diagram — sourced from manufacturer parts catalogue.
| Attribute | Value |
|---|---|
| External Toothing wheel side | 26 |
| ABS-Ring Diameter [mm] | 89 |
| Length [mm] | 1012 |
| Length [mm] | 502 |
| Length [mm] | 739 |
| Length [mm] | 983 |
| Sealing Ring Diameter [mm] | 52,6 |
| Bore Diameter [mm] | 10,2 |
| Diameter 1 [mm] | 76,5 |
| Inner length [mm] | 58 |
Other original equipment numbers linked to 7N0407763. Each one leads to its own fitment and price page.
Only vehicle manufacturers' numbers are listed here. Other makers' equivalents are under “Compatible parts”.
Aftermarket manufacturers cross-reference matching drive shaft bellow kit to OE 7N0407763 — verify fitment before ordering.
FEBEST · Drive shaft bellow kitDrive shaft bellow kit FEBEST 2717P-XC90F1Rear Side · 127 mm · 20 · 3£31.99In stockCommon original equipment numbers linked to replacement-part pages.