- Fitting Position
- Front Right / Front Left
- Length
- 170 mm
- Weight
- 1,678 kg
- EAN
- 4054224815342
In stock
Original equipment numberCITROËN
Drive shaft joint set, OE 3272EX (CITROËN). 11 compatible equivalents from 11 brands, 8 of them in stock. Prices from £22.99 to £62.99. Fits CITROËN, PEUGEOT, DS and 1 more make.
GSP 845057£33.99
PASCAL G1C012PC£35.99
FEBI BILSTEIN 181534£29.99
Manufacturers list each of these parts against OE 3272EX. The cheapest ones in stock come first; the full list follows, sorted by price.
UK delivery £5.99, free over £50 · We also ship from the EU to 200 countries, with no customs charges within the EU — see prices and times
Your car
Choose your car and we will mark the parts that fit it.
In stock
In stock
In stock
In stock
In stock
In stock
In stock
In stock
All 11 equivalents for OE 3272EX: in stock with a photo first, then in stock, then the ones with a supplier price. The extra columns show only the specifications that differ between these parts.
| Brand | Number | Length [mm] | Thread Size | Fitting Position | Price | Availability |
|---|---|---|---|---|---|---|
| 181534 | 170 mm | — | Front Right | £29.99 | In stock | |
| 845057 | 140,5 mm | M20X1,5 | — | £33.99 | In stock | |
| G1C012PC | — | — | Rear Side | £35.99 | In stock | |
| 302015100240 | 54 mm | — | Front Axle | £52.99 | In stock | |
| 607-560 | — | M20x1.5 | — | £62.99 | In stock | |
| 441 208 | 140,5 mm | M20X1,5 | — | £22.99 | In stock | |
| DP2110.10.1550 | 141 mm | M20X1,5 | — | £28.99 | In stock | |
| KPG612 | — | — | — | £51.99 | In stock | |
| 141-04-118 | 140 mm | M20X1,5 | Rear Side | £30.99 | Out of stock | |
| OJK66.018 | — | M20x1,5 | Rear Side | £39.99 | Out of stock | |
| 62-00-0605 | 140,5 mm | M20X1,5 | — | £47.99 | Out of stock |
OE 3272EX is compatible with the following make/model combinations:
Years show when the model was built (TecDoc). Fit depends on engine and body, so check your car before you buy. Articles that fit left-hand-drive vehicles only are left out of this UK list.
Original installation position for OE 3272EX. The red ring marks where this part installs on the vehicle.

OEM workshop diagram — sourced from manufacturer parts catalogue.
| Attribute | Value |
|---|---|
| Internal Toothing differential side, conn. to transmission | 22 |
| Outer Diameter [mm] | 86 |
| Length 1 [mm] | 89 |
| Length [mm] | 124 |
| Length [mm] | 153,5 |
| Length [mm] | 161,5 |
| Length [mm] | 162,5 |
| Length [mm] | 181 |
| Outer Diameter [mm] | 79 |
| Length [mm] | 153 |
Other original equipment numbers linked to 3272EX. Each one leads to its own fitment and price page.
Only vehicle manufacturers' numbers are listed here. Other makers' equivalents are under “Compatible parts”.
Common original equipment numbers linked to replacement-part pages.