Skip to main content
CP247
£ —
Does this fit your car?
Shock Absorber MOTRIO 8550502927 — no image available

No product images available

Specs, fitment data and pricing remain accurate.
BrandMOTRIO
MPN8550502927
OE refs27
SKU5377-8550502927

Similar products

Customers also bought

Details

SpecificationValue
BrandMOTRIO
Fitting PositionFront Right
Diameter [mm]180 mm
Length [mm]526 mm
Bore Diameter [mm]30.5 mm
Diameter 1 [mm]51 mm
Pin Diameter [mm]22 mm

OE numbers (27)

Search by this OE number to find compatible parts

Where this part fits

Original-fit position for OE 93174246.

STRUT ASS~Y — Suspension & Frame
Suspension & FramePosition main

About this product

MOTRIO shock absorber (8550502927) restores factory damping characteristics by controlling spring oscillation on both compression and rebound strokes, recovering steering precision and reducing body roll. Damping configuration — Fitting Position: Front Right, Shock Absorber Type: Aluminium, Shock Absorber Design: Aluminium, Shock Absorber System: Aluminium — is tuned to the original suspension geometry so spring rates and ride height are unaffected, preserving the manufacturer's comfort and handling balance. Mounting dimensions, piston diameter, and stroke length replicate the OEM unit on FIAT, OPEL, VAUXHALL applications, allowing a straight-swap installation without drilling or bracket modification. Supersedes manufacturer part numbers: 061193GRB, 102009, 104599, 110168410 and 172 more. MOTRIO dampers are gas-pressure charged, zero-leakage tested on a servo-hydraulic rig, and carry a 2-year unlimited-mileage warranty against manufacturing defects. Shock absorbers gradually lose damping force over time and should be inspected at 50,000 miles and replaced by 80,000–100,000 miles — even if they are not visibly leaking, internal valve wear reduces their effectiveness. Warning signs include excessive body roll in corners, nose-dive under braking, rear-end squat during acceleration, uneven tyre wear, and a bouncy or floaty ride — a simple bounce test (push down on each corner and release) can reveal weak dampers. Shock absorber replacement is an intermediate DIY task that requires spring compressors (for strut-type assemblies), a torque wrench, and penetrating oil for corroded fasteners — allow 2–3 hours per axle. When selecting shock absorbers, match the damper type (twin-tube, monotube, or gas-pressurised) to the original specification — upgrading to a different type can alter ride height and handling characteristics. Always replace shock absorbers in pairs (both sides of the same axle) to maintain balanced handling, and have the wheel alignment checked afterwards — worn dampers often allow geometry to drift out of specification. Every part is dispatched with tracked delivery and a 14-day money-back guarantee with hassle-free returns.

Suitable cars

Equivalent products (156)

Show all 156 OE numbers
4U Autoparts19685OP
ACEMARK102009
AL-KO301974
AL-KO301975
ASAM AUTOMOTIVE70905
ASAM AUTOMOTIVE70906
ASHIKAMA00169
ASHIKAMA00170
ASHIKAMA01089
AUGER20725
AUTOMEGA110168410
BENDIX061193GRB
BILSTEIN22118738
BILSTEIN22118745
BOGE32H53A
BOGE32H55A
BOGE32H57A
BOGE32N55A
BOGE32N56A
BOGE32N57A
ESEN SKV32SKV042
EUROREPAR1635547380
EUROREPAR1635548480
FEBEST1807G007FR
FEBEST1807G008FL
FEBEST2007G001R
FENOXA61319
FISPAF210G1527
ForcetechPS9712505
ForcetechPS9712507
GABRIEL51036
GABRIELG35439
GABRIELG35440
GABRIELG35450
GABRIELG63600
GOLD8260747
GOLD9150691
GOLD9150796
GOLD9260747
HERTH+BUSS JAKOPARTSJ43108103
JAPANPARTS9260747
JAPANPARTSMM00169
JAPANPARTSMM00170
JAPANPARTSMM01089
JAPKOMJ00169
JAPKOMJ01089
JP GROUP1242104380
KAGER810130
KAVO PARTSSSA10093
KAWE8705 10104
KONI87411463LSPORT
KONI87411463RSPORT
KONI87411469LSPORT
KONI87411469RSPORT
KONI87501082L
KONI87501082R
KRAFT AUTOMOTIVE4001533
KRAFT AUTOMOTIVE4001534
KYB334632£69.99
LTMC58590
LTMC58592
MAGNETI MARELLI351883070100
MAGNETI MARELLI351883070200
MAGNETI MARELLI379000284000
MANDOMSS017260
MANDOMSS021152
MAPCO20725
MASTER-SPORT GERMANY16K001631
MASTER-SPORT GERMANY16K001633
MASTER-SPORT GERMANY16K002431
MASTER-SPORT GERMANY16K002433
MASTER-SPORT GERMANY312602OPCSMS
MASTER-SPORT GERMANY312602PCSMS
MASTER-SPORT GERMANY312603PCSMS
MASTER-SPORT GERMANY312604PCSMS
MAXGEAR110259
MAXGEAR110260
MAXTRACMCD0200R
Maysan MandoPS9712505
MDRMSH700169
MDRMSH700170
METZGER AUTOTEILE2340178
MGAAM7086
MGAAM8086
MONROE742102SP
MONROEE7020
MONROEE7020R
MONROE-AU742102SP
NK653631971
NK653631972
OCAP82340FR
OCAP82562FR
Omnicraft2165718
Omnicraft2165720
Omnicraft2165802
OPEN PARTSSAB810631
OPTIMALA3609GL
OPTIMALA3609GR
OPTIMALA4030GL
OPTIMALA4030GR
OSSCA23476
OSSCA23485
OSSCA32781
OSSCA32782
PEMEBLAJAPMM00169
PEMEBLAJAPMM00170
QH Benelux178892
QH Benelux178893
QH Benelux878007
QUINTON HAZELLQAG178892
QUINTON HAZELLQAG178893
RECORD FRANCE104599
RECORD FRANCE334599
RIDEX854S0774
SACHS290 223
SACHS313 021£102.99
SIAAM545600
SIAAM545600G
SIDATF210G1527
STARLINETL C001656
STELLOX12140085SX
STELLOX42039249SX
STELLOX42039250SX
STELLOX42039577SX
STELLOX42140240SX
STELLOX42140254SX
TOORSG11680
TRICLO788676
TRISCAN8705 10104
TRWJGE140T
TRWJGE152T£29.99
VAICOV241742
VITAL SUSPENSIONS1105671
VITAL SUSPENSIONS1105672
VITAL SUSPENSIONS1105682
VITAL SUSPENSIONS210567
VITAL SUSPENSIONS210568
WXQP51036
WXQP54647

Shock Absorber MOTRIO 8550502927compatible car models

Car modelsFIAT: CROMA (194), CROMA Estate Van (194); OPEL: SIGNUM Hatchback (Z03), VECTRA C Estate (Z02), VECTRA C GTS (Z02), VECTRA C (Z02); VAUXHALL: SIGNUM (Z03), VECTRA Mk II (C) Estate (Z02), VECTRA Mk II (C) GTS (Z02), VECTRA Mk II (C) (Z02)
Engines1.8 16V (194AXG1A); 1.9 MJTD (194AXB1B); 1.8 (F48); 1.8 (F35); 1.8 16V (F68); 1.6 16V (F69); 1.8; 1.8 16V
Year of manufacture2000-2011
Manufacturer article number (MPN)8550502927
OE part numbers344066, 344068, 344070, 344071, 344080, 344082, 344084, 344086, 344088, 344090, 344361, 51767332, 51782165, 51805142, 51839113, 93171477, 93171479, 93171480, 93171481, 93174078 (+7 more)
Compatibility check

Loading vehicle data…

Please wait while we load vehicle compatibility information.
Description and what's included

MOTRIO 8550502927 . Bore Diameter [mm]: 30,5 mm. Diameter 1 [mm]: 51 mm. Diameter [mm]: 180 mm. Fitting Position: VR. Length [mm]: 526 mm. Pin Diameter [mm]: 22 mm. Shock Absorber Design: 2. Shock Absorber Mounting Type: 3

What's included:
  • 1x Shock Absorber
Shipping, returns, warranty

Free UK delivery on orders over £50.00. Tracked standard shipping.

  • Standard delivery: 4–8 business days
  • Order before 5pm — ships the next working day
  • Free returns within 14 days
  • All parts backed by manufacturer warranty

Warranty: 12-month manufacturer warranty on all parts. 14-day money-back guarantee if the part doesn't fit your vehicle.

Frequently Asked Questions

Is this Shock Absorber compatible with my car?

This Shock Absorber fits FIAT, OPEL, VAUXHALL vehicles. Use the vehicle selector at the top of the page to check exact compatibility — enter your car's make, model, and engine for a confirmed fitment match. All fitment data is verified through TecDoc.

What specifications does this MOTRIO Shock Absorber have?

This MOTRIO Shock Absorber has the following specifications: Fitting Position: VR; Shock Absorber Type: 2; Shock Absorber Design: 2; Shock Absorber System: 2; Shock Absorber Mounting Type: 3; Shock Absorber Mounting Type: 8. Check the full specifications table above for complete details.

What OE part numbers does this Shock Absorber replace?

This Shock Absorber replaces OE part numbers: 344066, 344068, 344070, 344071, 344080, 344082, 344084, 344086 and 19 more. Cross-reference these numbers with your vehicle's original part number to confirm compatibility.

How much does a Shock Absorber cost?

Shock Absorber prices vary depending on brand, specifications, and vehicle compatibility. Check the current price above for this MOTRIO Shock Absorber. All parts come with our 14-day money-back guarantee.

How do I know when to replace my Shock Absorber?

Look for excessive bouncing over bumps, nose-diving during braking, uneven tyre wear, fluid leaks on the shock body, or poor handling. Shocks should be inspected every 50,000 miles.

What tools do I need to replace a Shock Absorber?

Tools needed: floor jack, axle stands, 18-21mm socket for wheel bolts, spring compressor (if top mount must be removed), 17-19mm open-end spanner for shock piston nut, torque wrench. Difficulty: Moderate DIY. Safety warning: Coil springs store enormous energy -- only use purpose-built automotive spring compressors rated for the load. A spring released unexpectedly can cause fatal injury. Never improvise with non-rated tools.

Can I use this part as a replacement for OE 344066?

Yes, this MOTRIO Shock Absorber is a direct replacement for OE part number 344066. It is manufactured to meet or exceed original equipment specifications, ensuring proper fitment and performance. All cross-reference data is verified through TecDoc.

Related categories