Skip to main content
CP247
Gallery
BrandLÖBRO
MPN300838
OE refs1
SKU0056-300838
GTIN / EAN4019064115762

Similar products

Customers also bought

Details

SpecificationValue
BrandLÖBRO
CategoryCV joint
Length [mm]450 mm
Bore Diameter [mm]8.20 mm
Bolt Hole Circle Ø [mm]110 mm
Joint Diameter [mm]100 mm

OE/OEM numbers (1)

Search by this OE number to find compatible parts

Where this part fits

Original-fit position for OE 1H0407417. The red ring marks where this part installs on the vehicle.

1998 — Front axle, steering › 40740
1998 · Front axle, steering › 40740Position 7

About this product

LÖBRO CV joint (300838) transmits drive torque through full suspension travel and steering lock without generating vibration or noise, using a hardened-steel ball-and-cage design packed with high-temperature lithium-complex grease. Joint specification — Length [mm]: 450 mm, Bore Diameter [mm]: Carbon, 20 mm, Internal Toothing differential side, conn. to conn. shaft: 30, Number of bores: Plastic — determines the operating angle range and torque rating required to handle both the engine's peak output and the lateral forces generated in tight cornering manoeuvres. Spline count, joint diameter, and boot clamp positions are sized for the driveshaft on AUDI, VW applications; the included gaiter and grease pack mean no additional parts are needed for installation. Cross-references OE driveshaft references: 17-0751, 1H0 407 417, 1H0407417, 22933 and 1 more. LÖBRO CV joints are heat-treated and individually inspected for spline geometry before dispatch, matching the articulation angles and service life of the original manufacturer component. CV joints can last the lifetime of the vehicle if the protective rubber gaiter remains intact — but once the boot splits and grease escapes, the exposed joint deteriorates rapidly and typically fails within a few thousand miles. The classic warning sign is a rhythmic clicking or knocking noise when turning at low speed (especially in full lock), caused by worn ball tracks in the outer CV joint — inner joints tend to produce a clunking or vibration under acceleration. CV joint replacement is a moderate-to-advanced DIY job requiring a hub puller or slide hammer, circlip pliers, and a torque wrench — outer joints can often be replaced without removing the entire driveshaft, saving considerable time. When selecting a CV joint, ensure the spline count and ABS ring tooth count match the original — an incorrect ABS ring will trigger traction control and stability system faults. Replacing a worn CV joint promptly avoids the risk of sudden driveshaft failure — a seized or broken joint can lock a wheel while driving, creating a serious safety hazard. Every part is dispatched from our UK warehouse with a 30-day money-back guarantee and free hassle-free returns.

CV joint buying guide

Why replace this part?

CV joints transfer drive from the transmission to the wheels while accommodating suspension movement and steering angles. A worn CV joint can cause vibration, clicking noises, and ultimately complete loss of drive.

Signs you need a replacement

  • Clicking or popping noises during turns
  • vibration during acceleration
  • grease visible on the inside of the wheel
  • torn CV boot
  • clunking when shifting between drive and reverse

When to replace

Replace when CV boot tears or symptoms appear. CV joints can last the life of the vehicle if the boot remains intact.

Installation difficulty:Professional — we recommend workshop fitting

Suitable cars

Equivalent products (3)

METELLI17-0751
QUINTON HAZELLQVJ1134
SPIDAN22933

CV joint LÖBRO 300838compatible car models

Car modelsAUDI: A3 (8L1); VW: BORA I (1J2), BORA Variant (1J6), GOLF III (1H1), GOLF III Cabriolet (1E7), GOLF III Variant (1H5), GOLF IV (1J1), GOLF IV Variant (1J5), PASSAT B3/B4 (3A2, 35I), PASSAT B3/B4 Variant (3A5, 35I), VENTO (1H2)
Engines1.6; 1.4 16V; 1.9 TDI
Year of manufacture1988-2013
Manufacturer article number (MPN)300838
OE part numbers1H0 407 417
Compatibility check

Loading vehicle data…

Please wait while we load vehicle compatibility information.
Description and what's included

LÖBRO 300838 CV joint. Bolt Hole Circle Ø [mm]: 110 mm. Bore Diameter [mm]: 8,20 mm. Drive Shafts/Output Shafts: 5. Internal Toothing differential side, conn. to conn. shaft: 30. Joint Diameter [mm]: 100 mm. Joint Type: 3. Length [mm]: 450 mm. Number of bores: 6

What's included:
  • 1x CV joint
  • 1x CV boot kit (where applicable)
Shipping, returns, warranty

Free UK delivery on orders over £99.00. Express and standard shipping available.

  • Standard delivery: 2-5 business days
  • Express delivery: 1-2 business days
  • Free returns within 14 days
  • All parts backed by manufacturer warranty

Warranty: 12-month manufacturer warranty on all parts. 14-day money-back guarantee if the part doesn't fit your vehicle.

Frequently Asked Questions

Is this CV joint compatible with my car?

This CV joint fits AUDI, VW vehicles. Use the vehicle selector at the top of the page to check exact compatibility — enter your car's make, model, and engine for a confirmed fitment match. All fitment data is verified through TecDoc.

What specifications does this LÖBRO CV joint have?

This LÖBRO CV joint has the following specifications: Length [mm]: 450 mm; Bore Diameter [mm]: 8,20 mm; Internal Toothing differential side, conn. to conn. shaft: 30; Number of bores: 6; Bolt Hole Circle Ø [mm]: 110 mm; Drive Shafts/Output Shafts: 5. Check the full specifications table above for complete details.

What OE part numbers does this CV joint replace?

This CV joint replaces OE part numbers: 1H0 407 417. Cross-reference these numbers with your vehicle's original part number to confirm compatibility.

How much does a CV joint cost?

This LÖBRO CV joint is available for £97.99. CV joint prices vary depending on brand, specifications, and vehicle compatibility. LÖBRO parts offer a balance of quality and value, backed by our 14-day money-back guarantee.

How do I know when to replace my CV joint?

Signs include clicking or popping noises during turns, vibration during acceleration, or grease leaking from a torn CV boot.

What tools do I need to replace a CV joint?

Tools needed: floor jack, axle stands, CV boot clamp pliers (or band clamp tool), hub nut socket (30-36mm), torque wrench, CV grease (supplied with kit), new band clamps. Difficulty: Moderate DIY. Safety warning: Ensure the inner and outer joints are fully packed with the supplied grease before assembly -- dry CV joints fail rapidly under load and can cause sudden loss of drive.

Can I use this part as a replacement for OE 1H0 407 417?

Yes, this LÖBRO CV joint is a direct replacement for OE part number 1H0 407 417. It is manufactured to meet or exceed original equipment specifications, ensuring proper fitment and performance. All cross-reference data is verified through TecDoc.

Is the LÖBRO 300838 the same as the LÖBRO 303604?

No, while both are CV joint parts, they are different products. The LÖBRO 300838 has Length [mm]: 450 mm, Bore Diameter [mm]: 8,20 mm, Internal Toothing differential side, conn. to conn. shaft: 30. The LÖBRO 303604 may differ in dimensions, fitting position, or material composition. Always verify compatibility with your specific vehicle using our vehicle selector, or contact our customer service team for assistance.

Related categories