Skip to main content
CP247
Gallery
BrandHART
MPN357 665
OE refs10
SKU5251-357 665
GTIN / EAN5901219420427

Similar products

Customers also bought

Doing a clutch replacement?

Get all 2 parts in one click with our pre-assembled kit.

View kit

Details

SpecificationValue
BrandHART
Diameter [mm]240 mm

OE/OEM numbers (10)

Search by this OE number to find compatible parts

Where this part fits

Original-fit position for OE 0002521511. The red ring marks where this part installs on the vehicle.

PART — Others
OthersPosition main

About this product

HART clutch kit (357 665) restores clean gear changes and full torque transfer by replacing the friction disc, pressure plate, and release bearing as a matched assembly — eliminating the judder and slip that worn components cause. The assembly is rated for Number of Teeth: 26, Diameter [mm]: 240 mm, Supplementary Article/Info 2: 524, with the friction disc compound chosen to match the torque output of the engine and resist glazing under the stop-start urban driving cycles where clutches wear fastest. Spline count, disc diameter, and diaphragm spring load are matched to the gearbox input shaft on MERCEDES-BENZ models for a bolt-on installation requiring no machining of the flywheel face. Replaces OE clutch references: 000 252 07 05, 000 252 15 11, 000 252 30 05, 016 250 28 01 and 6 more. HART drivetrain components are dynamometer-verified for torque capacity before leaving the factory and are supplied with installation lubricant and alignment tools in the kit. Clutch lifespan varies widely — from 30,000 miles in heavy urban traffic to 100,000+ miles with smooth driving habits — but any manual-gearbox vehicle will eventually need a clutch replacement. Common symptoms of clutch wear include a slipping clutch (engine revs rising without a corresponding increase in speed), a biting point that has moved high in the pedal travel, judder when pulling away, and difficulty selecting gears. Clutch replacement is a significant job that requires gearbox removal — most DIY mechanics will need a transmission jack, an engine support bar, and a full set of sockets; allow a full day for the work. Always replace the complete clutch kit (disc, pressure plate, and release bearing) together — fitting only one component means the gearbox must be removed again when the remaining parts wear out shortly afterwards. Addressing clutch slip early prevents flywheel damage from overheating — a resurfaced or replaced flywheel adds substantial cost to a job that is already labour-intensive, so prompt replacement saves money. Every part is dispatched from our UK warehouse with a 30-day money-back guarantee and free hassle-free returns.

Clutch Kit buying guide

Why replace this part?

The clutch transfers engine power to the transmission. A worn clutch slips under load, makes gear changes difficult, and can eventually leave you stranded. Complete clutch kits include the disc, pressure plate, and release bearing for a comprehensive repair.

Signs you need a replacement

  • Difficulty shifting gears
  • burning smell when driving
  • clutch pedal feels soft or sticky
  • engine revs increase without acceleration (slipping)
  • unusual noises when pressing the clutch pedal

When to replace

Typically 60,000–100,000 miles, but highly variable based on driving style. City driving and towing wear clutches faster.

Installation difficulty:Professional — we recommend workshop fitting

Suitable cars

No equivalent parts found.

Clutch Kit HART 357 665compatible car models

Car modelsMERCEDES-BENZ: V-CLASS (638/2), VITO Bus (W638), VITO Van (W638)
EnginesV 200 (638.214, 638.294); 108 CDI 2.2 (638.194); 108 CDI 2.2 (638.094)
Year of manufacture1996-2003
Manufacturer article number (MPN)357 665
OE part numbers000 252 07 05, 000 252 15 11, 000 252 30 05, 016 250 28 01, 019 250 22 01, A 000 252 07 05, A 000 252 15 11, A 000 252 30 05, A 016 250 28 01, A 019 250 22 01
Compatibility check

Loading vehicle data…

Please wait while we load vehicle compatibility information.
Description and what's included

HART 357665 . Diameter [mm]: 240 mm. Number of Teeth: 26. Supplementary Article/Info 2: 524

What's included:
  • 1x Clutch disc
  • 1x Pressure plate
  • 1x Release bearing
Shipping, returns, warranty

Free UK delivery on orders over £99.00. Express and standard shipping available.

  • Standard delivery: 2-5 business days
  • Express delivery: 1-2 business days
  • Free returns within 14 days
  • All parts backed by manufacturer warranty

Warranty: 12-month manufacturer warranty on all parts. 14-day money-back guarantee if the part doesn't fit your vehicle.

Frequently Asked Questions

Is this Clutch Kit compatible with my car?

This Clutch Kit fits MERCEDES-BENZ vehicles. Use the vehicle selector at the top of the page to check exact compatibility — enter your car's make, model, and engine for a confirmed fitment match. All fitment data is verified through TecDoc.

What specifications does this HART Clutch Kit have?

This HART Clutch Kit has the following specifications: Number of Teeth: 26; Diameter [mm]: 240 mm; Supplementary Article/Info 2: 524. Check the full specifications table above for complete details.

What OE part numbers does this Clutch Kit replace?

This Clutch Kit replaces OE part numbers: 000 252 07 05, 000 252 15 11, 000 252 30 05, 016 250 28 01, 019 250 22 01, A 000 252 07 05, A 000 252 15 11, A 000 252 30 05 and 2 more. Cross-reference these numbers with your vehicle's original part number to confirm compatibility.

How much does a Clutch Kit cost?

This HART Clutch Kit is available for £86.99. Clutch Kit prices vary depending on brand, specifications, and vehicle compatibility. HART parts offer a balance of quality and value, backed by our 14-day money-back guarantee.

How do I know when to replace my Clutch Kit?

Signs include difficulty shifting gears, a burning smell, the clutch pedal feeling soft or sticky, slipping under load, or unusual noises when pressing the clutch pedal.

What tools do I need to replace a Clutch Kit?

Tools needed: gearbox jack or transmission support, complete socket and spanner set (10-19mm), clutch alignment tool (usually included in kit), flywheel locking tool (vehicle-specific), torque wrench, clutch grease for input shaft splines. Difficulty: Professional recommended. Safety warning: Clutch dust from older components may contain asbestos -- wear an approved dust respirator and use clutch cleaner spray rather than compressed air. The gearbox must be fully supported before unbolting from the engine.

Can I use this part as a replacement for OE 000 252 07 05?

Yes, this HART Clutch Kit is a direct replacement for OE part number 000 252 07 05. It is manufactured to meet or exceed original equipment specifications, ensuring proper fitment and performance. All cross-reference data is verified through TecDoc.

Related categories