Skip to main content
CP247
Gallery
BrandGH
MPNGH+353970
OE refs90
SKU4931-GH+353970
GTIN / EAN4251530832432

Similar products

Customers also bought

Details

SpecificationValue
BrandGH
MPNgh+353970
Fitting PositionFront Left
Fitting PositionFront Right
Fitting PositionFront Axle

OE numbers (90)

Search by this OE number to find compatible parts

Where this part fits

Original-fit position for OE 7700830492. The red ring marks where this part installs on the vehicle.

Vehicle fabrication number < MOD9909; Marking. = 7700827624 or Marking. = 7700827625 or Marking. = 7700830490 — 556B — Manual › 32 Non bearing front elements / Shock absorber
556B · Manual › 32 Non bearing front elements / Shock absorberPosition 1

About this product

GH shock absorber (GH+353970) restores factory damping characteristics by controlling spring oscillation on both compression and rebound strokes, recovering steering precision and reducing body roll. Damping configuration — Fitting Position: Front Left, Fitting Position: Front Right, Fitting Position: Front Axle, Shock Absorber Type: Aluminium — is tuned to the original suspension geometry so spring rates and ride height are unaffected, preserving the manufacturer's comfort and handling balance. Mounting dimensions, piston diameter, and stroke length replicate the OEM unit on RENAULT applications, allowing a straight-swap installation without drilling or bracket modification. Supersedes manufacturer part numbers: 0000663651, 101444, 104511, 104602 and 238 more. GH dampers are gas-pressure charged, zero-leakage tested on a servo-hydraulic rig, and carry a 2-year unlimited-mileage warranty against manufacturing defects. Shock absorbers gradually lose damping force over time and should be inspected at 50,000 miles and replaced by 80,000–100,000 miles — even if they are not visibly leaking, internal valve wear reduces their effectiveness. Warning signs include excessive body roll in corners, nose-dive under braking, rear-end squat during acceleration, uneven tyre wear, and a bouncy or floaty ride — a simple bounce test (push down on each corner and release) can reveal weak dampers. Shock absorber replacement is an intermediate DIY task that requires spring compressors (for strut-type assemblies), a torque wrench, and penetrating oil for corroded fasteners — allow 2–3 hours per axle. When selecting shock absorbers, match the damper type (twin-tube, monotube, or gas-pressurised) to the original specification — upgrading to a different type can alter ride height and handling characteristics. Always replace shock absorbers in pairs (both sides of the same axle) to maintain balanced handling, and have the wheel alignment checked afterwards — worn dampers often allow geometry to drift out of specification. Every part is dispatched with tracked delivery and a 14-day money-back guarantee with hassle-free returns.

Suitable cars

Equivalent products (154)

Show all 154 OE numbers
ABAKUS23201126
AL-KO302043
ASAM AUTOMOTIVE101444
ASAM AUTOMOTIVE71435
ASHIKAMA00415
ASHIKAMA00416
ASHIKAMA70012
ATECSOAMT00427
AUTO FRANCE PARTS152016C
AUTOMOTOR FrancePSG3654
AUTOMOTOR FrancePSH3654
A.Z. MeisterteileAZMT420850248
A.Z. MeisterteileAZMT420850311
BILSTEIN22132390
BOGE30D320
BOGE30D32F
BÖLKBOLC041011
BREMSISA0341
BREMSISA0342
BREMSISA1554
BSGBSG75300003
BSGBSG75300026
DAVID VASCOFS3718
DAVID VASCOFS4718
DAVID VASCOFS8712
DIAMAXAP01104
DIAMAXAP01105
DIEDERICHS9970447
DJ PARTSDS1421GS
DJ PARTSDS1477HS
DJ PARTSDS1778GS
Dr!ve+DP1610100013
EGT383379EGT
EUROREPAR1623333180
EUROREPAR1623333780
EUROREPAR1635542680
EUROREPAR1635544680
EUROREPAR1635546080
FEBEST24110008F
FI.BAFSA307
FISPAF210G1429
GABRIELG35421
GABRIELG35454
GOLD8250377
GOLD8251033
GOLD9250377
GOLD9250921
GOLD9251033
GOLD9251595
GSP32300980
GSP32303330
JAPANPARTSMM00415
JAPANPARTSMM00416
JAPANPARTSMM70012
JAPANPARTSMQ00415
JAPANPARTSMQ00416
JAPANPARTSMQ70012
JAPKOMJ00416
JP GROUP4342102100
KAMOKA20334401
KAMOKA20633362
KAVO PARTSSSA10214
KAVO PARTSSSA10475
KRAFT AUTOMOTIVE4005047
KRAFTVOLL GERMANY15010179
KYB333718£61.99
KYB338712£59.99
KYB633718£55.99
LYNXAUTOG32612LR
LYNXAUTOG32890LR
LYNXAUTOO32335LR
MAGNETI MARELLI356219070000
MAGNETI MARELLI357440080000
MANDOMSS016199
MANDOMSS017377
MAPCO20158
MASTER-SPORT GERMANY16K004231
MASTER-SPORT GERMANY16K004231P
MASTER-SPORT GERMANY16K004233
MASTER-SPORT GERMANY16K004233P
MASTER-SPORT GERMANY16K005861
MASTER-SPORT GERMANY16K005861P
MASTER-SPORT GERMANY16K005863
MASTER-SPORT GERMANY16K005863P
MASTER-SPORT GERMANY310054PCSMS
MASTER-SPORT GERMANY338712KPCSMS
MAXGEAR110296
METZGER AUTOTEILE2340423
MEYLE16266230029
MOTRIO8660005853
MOTRIO8660005922
MTR12108776
MTR12108784
NK65393204
NTYARE002
OCAP82050FU
Omnicraft2165628
Omnicraft2165746
OPEN PARTSSAB802831
OPEN PARTSSAB809611
OPEN PARTSSAB868731
OPTIMALA3552G
OPTIMALA3552H
PROFLEX AUTOMOTIVEPX5FC370
PRT473362
PRT475693
PRT935772
QUINTON HAZELLQAG178888
RECORD FRANCE104511
RECORD FRANCE104602
RECORD FRANCE334511
RECORD FRANCE334602
RED-LINE39RE000
RED-LINE39RE025
RIDEX854S0063
SACHS310054
SACHS310056
SIDATF210G1429
SNRSA6554310
SNRSA6554327
SRLineS010590G
StarkSKSA0130062
STATIMA178
STELLOX41130162SX
STELLOX42130223SX
STELLOX42139885SX
SYNCRONIXSYNC1141
SYNCRONIXSYNC1160
SYNCRONIXSYNC1343
SYNCRONIXSYNC91160
SYNCRONIXSYNC91343
TASHIKOG33718
TRISCAN870525108
TRISCAN870525109
TRWJGM599T£55.99
VITAL SUSPENSIONS1106500
VITAL SUSPENSIONS1106520
VITAL SUSPENSIONS210650
VITAL SUSPENSIONS210652
ZentPartsZ00335
ZentPartsZ00387
ZentPartsZ00797

Shock Absorber GH GH+353970compatible car models

Car modelsRENAULT: MEGANE II (BM0/1, CM0/1), MEGANE II Coupé-Cabriolet (EM0/1), MEGANE II Estate (KM0/1), MEGANE II Estate Van (KM), MEGANE II Hatchback Van (KM0/2), MEGANE II Saloon (LM0/1)
Engines1.4 16V; 1.5 dCi (EM16); 1.4; 1.5 dCi (KM02); 1.5 dCi
Year of manufacture2001-2012
Manufacturer article number (MPN)GH+353970
OE part numbers0000663651, 2200222457, 310054, 663651, 7700827624, 7700827625, 7700827626, 7700827627, 7700827628, 7700827628B, 7700827628C, 7700827629, 7700829278, 7700829279, 7700829430, 7700829431, 7700830469, 7700830490, 7700830491, 7700830492 (+70 more)
Compatibility check

Loading vehicle data…

Please wait while we load vehicle compatibility information.
Description and what's included

GH gh+353970 PRO. Fitting Position: VA. Fitting Position: VL. Fitting Position: VR. Shock Absorber Design: 4. Shock Absorber Mounting Type: 3. Shock Absorber System: 2. Shock Absorber Type: 2

What's included:
  • 1x Shock Absorber
Shipping, returns, warranty

Free UK delivery on orders over £99.00. Tracked standard shipping.

  • Standard delivery: 5–9 business days
  • Order before 5pm — ships the next working day
  • Free returns within 14 days
  • All parts backed by manufacturer warranty

Warranty: 12-month manufacturer warranty on all parts. 14-day money-back guarantee if the part doesn't fit your vehicle.

Frequently Asked Questions

Is this Shock Absorber compatible with my car?

This Shock Absorber fits RENAULT vehicles. Use the vehicle selector at the top of the page to check exact compatibility — enter your car's make, model, and engine for a confirmed fitment match. All fitment data is verified through TecDoc.

What specifications does this GH Shock Absorber have?

This GH Shock Absorber has the following specifications: Fitting Position: VL; Fitting Position: VR; Fitting Position: VA; Shock Absorber Type: 2; Shock Absorber Design: 4; Shock Absorber System: 2. Check the full specifications table above for complete details.

What OE part numbers does this Shock Absorber replace?

This Shock Absorber replaces OE part numbers: 0000663651, 2200222457, 310054, 663651, 7700827624, 7700827625, 7700827626, 7700827627 and 82 more. Cross-reference these numbers with your vehicle's original part number to confirm compatibility.

How much does a Shock Absorber cost?

This GH Shock Absorber is available for £43.99. Shock Absorber prices vary depending on brand, specifications, and vehicle compatibility. GH parts offer a balance of quality and value, backed by our 14-day money-back guarantee.

How do I know when to replace my Shock Absorber?

Look for excessive bouncing over bumps, nose-diving during braking, uneven tyre wear, fluid leaks on the shock body, or poor handling. Shocks should be inspected every 50,000 miles.

What tools do I need to replace a Shock Absorber?

Tools needed: floor jack, axle stands, 18-21mm socket for wheel bolts, spring compressor (if top mount must be removed), 17-19mm open-end spanner for shock piston nut, torque wrench. Difficulty: Moderate DIY. Safety warning: Coil springs store enormous energy -- only use purpose-built automotive spring compressors rated for the load. A spring released unexpectedly can cause fatal injury. Never improvise with non-rated tools.

Can I use this part as a replacement for OE 0000663651?

Yes, this GH Shock Absorber is a direct replacement for OE part number 0000663651. It is manufactured to meet or exceed original equipment specifications, ensuring proper fitment and performance. All cross-reference data is verified through TecDoc.

Related categories