Skip to main content
CP247
Gallery
BrandGH
MPNGH-339995
OE refs32
SKU4931-GH-339995
GTIN / EAN4251530809816

Similar products

Customers also bought

Details

SpecificationValue
BrandGH
MPNgh-339995
Fitting PositionRear Left
Fitting PositionRear Axle
Fitting PositionRear Right
Article number of recommended accessoriesGH-694705

OE/OEM numbers (32)

Search by this OE number to find compatible parts

Where this part fits

Original-fit position for OE 1H0513031F. The red ring marks where this part installs on the vehicle.

SHOCK ABSORBER — Suspension & Frame
Suspension & FramePosition main

About this product

GH shock absorber (GH-339995) restores factory damping characteristics by controlling spring oscillation on both compression and rebound strokes, recovering steering precision and reducing body roll. Damping configuration — Fitting Position: Rear Left, Fitting Position: Rear Axle, Fitting Position: Rear Right, Shock Absorber Type: Aluminium — is tuned to the original suspension geometry so spring rates and ride height are unaffected, preserving the manufacturer's comfort and handling balance. Mounting dimensions, piston diameter, and stroke length replicate the OEM unit on SEAT, VW applications, allowing a straight-swap installation without drilling or bracket modification. Supersedes manufacturer part numbers: 100290, 1011740, 103059, 103841 and 200 more. GH dampers are gas-pressure charged, zero-leakage tested on a servo-hydraulic rig, and carry a 2-year unlimited-mileage warranty against manufacturing defects. Shock absorbers gradually lose damping force over time and should be inspected at 50,000 miles and replaced by 80,000–100,000 miles — even if they are not visibly leaking, internal valve wear reduces their effectiveness. Warning signs include excessive body roll in corners, nose-dive under braking, rear-end squat during acceleration, uneven tyre wear, and a bouncy or floaty ride — a simple bounce test (push down on each corner and release) can reveal weak dampers. Shock absorber replacement is an intermediate DIY task that requires spring compressors (for strut-type assemblies), a torque wrench, and penetrating oil for corroded fasteners — allow 2–3 hours per axle. When selecting shock absorbers, match the damper type (twin-tube, monotube, or gas-pressurised) to the original specification — upgrading to a different type can alter ride height and handling characteristics. Always replace shock absorbers in pairs (both sides of the same axle) to maintain balanced handling, and have the wheel alignment checked afterwards — worn dampers often allow geometry to drift out of specification. Every part is dispatched from our UK warehouse with a 30-day money-back guarantee and free hassle-free returns.

Suitable cars

Equivalent products (173)

Show all 173 OE numbers
ABAKUS23202065
AIC51956
AL-KO100290
AL-KO106950
AL-KO108353
AL-KO810031
ASHIKAMA00493
ASHIKAMA00508
ASHIKAMA00511
ASHIKAMA00548
ASHUKI by PalidiumPAL90035
AUTOMEGA110096710
AUTOMOTOR FrancePSG6077
A.Z. MeisterteileAZMT420850096
A.Z. MeisterteileAZMT420850398
BILSTEIN15062192
BILSTEIN19019741
BILSTEIN19019963
BILSTEIN19124681
BOGE272150
BOGE272151
BOGE27415F
BOGE30X29A
BÖLKBOLA1695H
BÖLKBOLB041047
BREMSISA0413
BREMSISA0425
BREMSISA0428
BREMSISA0461
BSGBSG90300013
DACO Germany559995
DAVID VASCORS3191
DAVID VASCORS3800
DENCKERMANNDSC001G
DIEDERICHS9970081
DIEDERICHS9970092
DJ PARTSDS1950HT
Dr!ve+DP1610100088
EGT373408EGT
EUROREPAR1623320780
FISPAF220G1350
GABRIEL51263
GABRIEL51421
GABRIELG51206
GABRIELG51263
GHGH309995
GHGH339995
GOLD8430085
GOLD8430613
GOLD9430085
GOLD9430613
GOLD9431005
GSP31130580
GSP32110190
HERTH+BUSS JAKOPARTSJ4320802
JAPANPARTSMM00493
JAPANPARTSMM00508
JAPANPARTSMM00511
JAPANPARTSMM00548
JAPANPARTSMQ00493
JAPANPARTSMQ00508
JAPANPARTSMQ00511
JAPANPARTSMQ00548
JAPKOMJ00511
JP GROUP1152100500
KAMOKA20443031W
KRAFT AUTOMOTIVE4010220
KRAFT AUTOMOTIVE4010230
KRONERK3501161G
KRONERK3501563H
KYB343191£47.99
KYB343258£55.99
KYB353013£88.99
KYB443235£44.99
KYB443800£41.99
LYNXAUTOG12721LR
LYNXAUTOG12920LR
LYNXAUTOO12521LR
LYNXAUTOO12859LR
MANDOMSS015486
MANDOMSS015650
MAPCO20752
MASTER-SPORT GERMANY105739PCSMS
MASTER-SPORT GERMANY105740PCSMS
MASTER-SPORT GERMANY105776PCSMS
MASTER-SPORT GERMANY16K003202
MASTER-SPORT GERMANY16K003202P
MASTER-SPORT GERMANY16K003204
MASTER-SPORT GERMANY16K003204P
MASTER-SPORT GERMANY16K005334
MASTER-SPORT GERMANY16K005334P
MASTER-SPORT GERMANY16K006372
MASTER-SPORT GERMANY16K006372P
MASTER-SPORT GERMANY16K006374
MASTER-SPORT GERMANY16K006374P
MAXGEAR110199
METZGER AUTOTEILE2340076
METZGER AUTOTEILE2340086
MEYLE1267250055
MOTRIO8660006014
MTRMT3846
NK60991695
NK63991835
OCAP82214RU
OCAP82402RU
Omnicraft2166174
Omnicraft2166192
OPEN PARTSSAB811632
OPEN PARTSSAB819012
OPTIMALA1029H
OPTIMALA1695G
OPTIMALA1695H
Oyodo20A9082OYO
PROFLEX AUTOMOTIVEPX5BA200
PROFLEX AUTOMOTIVEPX6BA200
PRT372060
PRT381061
PRT935388
PRT935502
PRT935963
QUINTON HAZELLQAG179309
RECORD FRANCE103841
RECORD FRANCE333841
RECORD FRANCE338259
RED-LINE39VW015
RED-LINE39VW023
RIDEX854S0556
RIDEX854S18820
Roadmatic251064RM
SACHS105739
SACHS105740
SACHS105748
SACHS105769
SACHS350709
SIDATF220G1350
SNRSA9543309
SRLineS011202G
SRLineS011202H
StarkSKSA0131215
STATIMA062
STELLOX31120004SX
STELLOX32120055SX
STELLOX42039500SX
SYNCRONIXSYNC1110
TASHIKOG43191
TOPRAN103059
TRISCAN870529209
TRWJGS151T£48.99
TRWJGS181T£35.99
TRWJHS181T£35.99
TRWJHS213T
VAICOV101751
VITAL SUSPENSIONS1011740
VITAL SUSPENSIONS1111740
VITAL SUSPENSIONS1111750
VITAL SUSPENSIONS201174
VITAL SUSPENSIONS211174
VITAL SUSPENSIONS211175
ZentPartsZ00217
ZentPartsZ00237
ZentPartsZ00741
ZentPartsZ01369

Shock Absorber GH GH-339995compatible car models

Car modelsSEAT: TOLEDO I (1L2); VW: CORRADO (53I), GOLF II (19E, 1G1), GOLF III (1H1), GOLF III Cabriolet (1E7), GOLF IV Cabriolet (1E7), JETTA II (19E, 1G2, 165), VENTO (1H2)
Engines1.6 i; 1.8 16V; 1.0; 1.4; 1.6; 1.3
Year of manufacture1983-2002
Manufacturer article number (MPN)GH-339995
OE part numbers191513033, 191513033A, 191513033C, 191513033D, 191513033E, 191513033H, 191513033J, 191513033M, 1H0513031, 1H0513031A, 1H0513031D, 1H0513031E, 1H0513031EL, 1H0513031F, 1H0513031G, 1H0513031J, 1H0513031K, 1H0513031L, 1H0513031M, 1H0513031R (+12 more)
Compatibility check

Loading vehicle data…

Please wait while we load vehicle compatibility information.
Description and what's included

GH gh-339995 . Article number of recommended accessories: GH-694705. Fitting Position: HA. Fitting Position: HL. Fitting Position: HR. Shock Absorber Design: 4. Shock Absorber Mounting Type: 2. Shock Absorber Mounting Type: 3. Shock Absorber System: 2

What's included:
  • 1x Shock Absorber
Shipping, returns, warranty

Free UK delivery on orders over £99.00. Express and standard shipping available.

  • Standard delivery: 2-5 business days
  • Express delivery: 1-2 business days
  • Free returns within 14 days
  • All parts backed by manufacturer warranty

Warranty: 12-month manufacturer warranty on all parts. 14-day money-back guarantee if the part doesn't fit your vehicle.

Frequently Asked Questions

Is this Shock Absorber compatible with my car?

This Shock Absorber fits SEAT, VW vehicles. Use the vehicle selector at the top of the page to check exact compatibility — enter your car's make, model, and engine for a confirmed fitment match. All fitment data is verified through TecDoc.

What specifications does this GH Shock Absorber have?

This GH Shock Absorber has the following specifications: Fitting Position: HL; Fitting Position: HA; Fitting Position: HR; Shock Absorber Type: 2; Shock Absorber Design: 4; Shock Absorber System: 2. Check the full specifications table above for complete details.

What OE part numbers does this Shock Absorber replace?

This Shock Absorber replaces OE part numbers: 191513033, 191513033A, 191513033C, 191513033D, 191513033E, 191513033H, 191513033J, 191513033M and 24 more. Cross-reference these numbers with your vehicle's original part number to confirm compatibility.

How much does a Shock Absorber cost?

This GH Shock Absorber is available for £30.99. Shock Absorber prices vary depending on brand, specifications, and vehicle compatibility. GH parts offer a balance of quality and value, backed by our 14-day money-back guarantee.

How do I know when to replace my Shock Absorber?

Look for excessive bouncing over bumps, nose-diving during braking, uneven tyre wear, fluid leaks on the shock body, or poor handling. Shocks should be inspected every 50,000 miles.

What tools do I need to replace a Shock Absorber?

Tools needed: floor jack, axle stands, 18-21mm socket for wheel bolts, spring compressor (if top mount must be removed), 17-19mm open-end spanner for shock piston nut, torque wrench. Difficulty: Moderate DIY. Safety warning: Coil springs store enormous energy -- only use purpose-built automotive spring compressors rated for the load. A spring released unexpectedly can cause fatal injury. Never improvise with non-rated tools.

Can I use this part as a replacement for OE 191513033?

Yes, this GH Shock Absorber is a direct replacement for OE part number 191513033. It is manufactured to meet or exceed original equipment specifications, ensuring proper fitment and performance. All cross-reference data is verified through TecDoc.

Related categories