Skip to main content
CP247
Gallery
BrandGH
MPNGH-322366
OE refs28
SKU4931-GH-322366
GTIN / EAN4251530805504

Similar products

Customers also bought

Details

SpecificationValue
BrandGH
MPNgh-322366
Fitting PositionFront Axle
Fitting PositionFront Right
Fitting PositionFront Left
Article number of recommended accessoriesGH-622366
Article number of recommended accessoriesGH-694702
Article number of recommended accessoriesGH-362366

OE/OEM numbers (28)

Search by this OE number to find compatible parts

Where this part fits

Original-fit position for OE 50708895. The red ring marks where this part installs on the vehicle.

STRUT ASS~Y — Suspension & Frame
Suspension & FramePosition main

About this product

GH shock absorber (GH-322366) restores factory damping characteristics by controlling spring oscillation on both compression and rebound strokes, recovering steering precision and reducing body roll. Damping configuration — Fitting Position: Front Axle, Fitting Position: Front Right, Fitting Position: Front Left, Shock Absorber Type: Steel — is tuned to the original suspension geometry so spring rates and ride height are unaffected, preserving the manufacturer's comfort and handling balance. Mounting dimensions, piston diameter, and stroke length replicate the OEM unit on FIAT applications, allowing a straight-swap installation without drilling or bracket modification. Supersedes manufacturer part numbers: 05779, 104513, 1101440, 1101450 and 183 more. GH dampers are gas-pressure charged, zero-leakage tested on a servo-hydraulic rig, and carry a 2-year unlimited-mileage warranty against manufacturing defects. Shock absorbers gradually lose damping force over time and should be inspected at 50,000 miles and replaced by 80,000–100,000 miles — even if they are not visibly leaking, internal valve wear reduces their effectiveness. Warning signs include excessive body roll in corners, nose-dive under braking, rear-end squat during acceleration, uneven tyre wear, and a bouncy or floaty ride — a simple bounce test (push down on each corner and release) can reveal weak dampers. Shock absorber replacement is an intermediate DIY task that requires spring compressors (for strut-type assemblies), a torque wrench, and penetrating oil for corroded fasteners — allow 2–3 hours per axle. When selecting shock absorbers, match the damper type (twin-tube, monotube, or gas-pressurised) to the original specification — upgrading to a different type can alter ride height and handling characteristics. Always replace shock absorbers in pairs (both sides of the same axle) to maintain balanced handling, and have the wheel alignment checked afterwards — worn dampers often allow geometry to drift out of specification. Every part is dispatched from our UK warehouse with a 30-day money-back guarantee and free hassle-free returns.

Suitable cars

Equivalent products (161)

Show all 161 OE numbers
ABAKUS23201092
ABAKUS23201143
AL-KO301133
AL-KO301143
AL-KO810073
ASAM AUTOMOTIVE05779
ASAM AUTOMOTIVE33024
ASHIKAMA00163
ASHIKAMA00192
ASHIKAMA00915
ATECSOAMT00146
ATECSOAMT00219
A.Z. MeisterteileAZMT420850040
A.Z. MeisterteileAZMT420850550
BILSTEIN22226556
BOGE32R71A
BOGE32S89A
BOGE32S90A
BOGE32S92A
BOGE32S93A
BREMSISA0124
BREMSISA0153
BREMSISA0751
BREMSISA0752
BSGBSG25300017
DACO Germany450920
DAVID VASCOFS4869
DAVID VASCOFS9730
DAVID VASCOFS9731
DENCKERMANNDSB197G
DIEDERICHS9970397
Dr!ve+DP1610100625
Dr!ve+DP1610100657
EGT383462EGT
EUROREPAR1623333280
EUROREPAR1635547580
FI.BAFSA519
FISPAF210G1458
FISPAF210G1462
FRECCIASA201061
FRECCIASA201192
GABRIELG35389
GABRIELG35390
GABRIELG35391
GABRIELG54429
GHGH322366
GOLD8260395
GOLD9260395
GOLD9260587
GOLD9260591
GOLD9260593
GOLD9263113
GOLD9263119
GSP32302510
GSP32303130
JAPANPARTSMM00163
JAPANPARTSMM00192
JAPANPARTSMM00915
JAPANPARTSMQ00163
JAPANPARTSMQ00192
JAPANPARTSMQ00915
JAPKOMJ00915
KAMOKA20334006
KAMOKA20334188
KAVO PARTSSSA10097
KAVO PARTSSSA10098
KAVO PARTSSSA10841
KRAFTVOLL GERMANY15010365
KRAFTVOLL GERMANY15010607
KYB334666
KYB334869
KYB339730£67.99
KYB339731£74.99
KYB339732£73.99
KYB9347500£55.99
LYNXAUTOG32700LR
LYNXAUTOG32864LR
MAGNETI MARELLI351963070000
MANDOMSS016052
MANDOMSS016255
MANDOMSS016263
MASTER-SPORT GERMANY16K004951
MASTER-SPORT GERMANY16K004951P
MASTER-SPORT GERMANY16K004953
MASTER-SPORT GERMANY16K004953P
MASTER-SPORT GERMANY16K005461
MASTER-SPORT GERMANY16K005461P
MASTER-SPORT GERMANY16K005463
MASTER-SPORT GERMANY16K005463P
MASTER-SPORT GERMANY314623PCSMS
MASTER-SPORT GERMANY314624PCSMS
MAXGEAR110390
METZGER AUTOTEILE2340393
MEYLE2266230019
MONROE16454£102.99
NK65233154
NK65233874
NTYAFT015
NTYAFT051
OCAP82124FU
OCAP82152FU
OCAP82693FU
OPEN PARTSSAB805031
OPEN PARTSSAB806831
OPTIMALA3034G
OPTIMALA3487G
PROFLEX AUTOMOTIVEPX5FC316
PROFLEX AUTOMOTIVEPX5FC880
PRT474188
PRT475671
PRT476941
PRT935924
RECORD FRANCE104513
RECORD FRANCE334513
RED-LINE39FT014
RED-LINE39FT015
RED-LINE39FT078
RIDEX854S0290
RIDEX854S0382
Roadmatic401068RM
SACHS313990
SACHS314623
SACHS314624
SACHS314626
SACHS314627
SIDATF210G1458
SIDATF210G1462
SNRSA6584306
StarkSKSA0130391
StarkSKSA0130948
STELLOX42039382SX
TRWJGM360T£123.99
TRWJGM362T£72.99
TRWJGM627T£122.99
VITAL SUSPENSIONS1101440
VITAL SUSPENSIONS1101450
VITAL SUSPENSIONS1101630
VITAL SUSPENSIONS1101750
VITAL SUSPENSIONS210144
VITAL SUSPENSIONS210145
VITAL SUSPENSIONS210163
VITAL SUSPENSIONS210175

Shock Absorber GH GH-322366compatible car models

Car modelsFIAT: BRAVO II (198), STILO (192), STILO Multi Wagon (192), STILO VAN (192)
Engines1.4 16V (198AXS1B); 1.2 16V (192XA1B); 1.4 16V; 1.4 (192DXH1B)
Year of manufacture2001-2016
Manufacturer article number (MPN)GH-322366
OE part numbers50700691, 50700693, 50702878, 50703539, 50705405, 50706284, 50707278, 50707282, 50707378, 50707950, 50708205, 50708206, 50708248, 50708252, 50708892, 50708893, 50708894, 50708895, 50709524, 50709526 (+8 more)
Compatibility check

Loading vehicle data…

Please wait while we load vehicle compatibility information.
Description and what's included

GH gh-322366 . Article number of recommended accessories: GH-362366. Article number of recommended accessories: GH-622366. Article number of recommended accessories: GH-694702. Fitting Position: VA. Fitting Position: VL. Fitting Position: VR. Shock Absorber Design: 4. Shock Absorber Mounting Type: 3

What's included:
  • 1x Shock Absorber
Shipping, returns, warranty

Free UK delivery on orders over £99.00. Express and standard shipping available.

  • Standard delivery: 2-5 business days
  • Express delivery: 1-2 business days
  • Free returns within 14 days
  • All parts backed by manufacturer warranty

Warranty: 12-month manufacturer warranty on all parts. 14-day money-back guarantee if the part doesn't fit your vehicle.

Frequently Asked Questions

Is this Shock Absorber compatible with my car?

This Shock Absorber fits FIAT vehicles. Use the vehicle selector at the top of the page to check exact compatibility — enter your car's make, model, and engine for a confirmed fitment match. All fitment data is verified through TecDoc.

What specifications does this GH Shock Absorber have?

This GH Shock Absorber has the following specifications: Fitting Position: VA; Fitting Position: VR; Fitting Position: VL; Shock Absorber Type: 1; Shock Absorber Design: 4; Shock Absorber System: 2. Check the full specifications table above for complete details.

What OE part numbers does this Shock Absorber replace?

This Shock Absorber replaces OE part numbers: 50700691, 50700693, 50702878, 50703539, 50705405, 50706284, 50707278, 50707282 and 20 more. Cross-reference these numbers with your vehicle's original part number to confirm compatibility.

How much does a Shock Absorber cost?

This GH Shock Absorber is available for £54.99. Shock Absorber prices vary depending on brand, specifications, and vehicle compatibility. GH parts offer a balance of quality and value, backed by our 14-day money-back guarantee.

How do I know when to replace my Shock Absorber?

Look for excessive bouncing over bumps, nose-diving during braking, uneven tyre wear, fluid leaks on the shock body, or poor handling. Shocks should be inspected every 50,000 miles.

What tools do I need to replace a Shock Absorber?

Tools needed: floor jack, axle stands, 18-21mm socket for wheel bolts, spring compressor (if top mount must be removed), 17-19mm open-end spanner for shock piston nut, torque wrench. Difficulty: Moderate DIY. Safety warning: Coil springs store enormous energy -- only use purpose-built automotive spring compressors rated for the load. A spring released unexpectedly can cause fatal injury. Never improvise with non-rated tools.

Can I use this part as a replacement for OE 50700691?

Yes, this GH Shock Absorber is a direct replacement for OE part number 50700691. It is manufactured to meet or exceed original equipment specifications, ensuring proper fitment and performance. All cross-reference data is verified through TecDoc.

Related categories