Skip to main content
CP247
Gallery
BrandGH
MPNGH+351549V
OE refs354
SKU4931-GH+351549V
GTIN / EAN4251530842042

Similar products

Customers also bought

Details

SpecificationValue
BrandGH
MPNgh+351549v
Fitting PositionFront Left
Fitting PositionFront Axle
Article number of recommended accessoriesGH-621549
paired article numberGH+351549H

OE/OEM numbers (354)

Search by this OE number to find compatible parts

Where this part fits

Original-fit position for OE 31316767322. The red ring marks where this part installs on the vehicle.

STRUT ASS~Y — Suspension & Frame
Suspension & FramePosition main

About this product

GH shock absorber (GH+351549V) restores factory damping characteristics by controlling spring oscillation on both compression and rebound strokes, recovering steering precision and reducing body roll. Damping configuration — Fitting Position: Front Left, Fitting Position: Front Axle, Shock Absorber Type: Aluminium, Shock Absorber Design: Copper — is tuned to the original suspension geometry so spring rates and ride height are unaffected, preserving the manufacturer's comfort and handling balance. Mounting dimensions, piston diameter, and stroke length replicate the OEM unit on BMW applications, allowing a straight-swap installation without drilling or bracket modification. Supersedes manufacturer part numbers: 0011022641, 0830071, 104644, 1101901 and 509 more. GH dampers are gas-pressure charged, zero-leakage tested on a servo-hydraulic rig, and carry a 2-year unlimited-mileage warranty against manufacturing defects. Shock absorbers gradually lose damping force over time and should be inspected at 50,000 miles and replaced by 80,000–100,000 miles — even if they are not visibly leaking, internal valve wear reduces their effectiveness. Warning signs include excessive body roll in corners, nose-dive under braking, rear-end squat during acceleration, uneven tyre wear, and a bouncy or floaty ride — a simple bounce test (push down on each corner and release) can reveal weak dampers. Shock absorber replacement is an intermediate DIY task that requires spring compressors (for strut-type assemblies), a torque wrench, and penetrating oil for corroded fasteners — allow 2–3 hours per axle. When selecting shock absorbers, match the damper type (twin-tube, monotube, or gas-pressurised) to the original specification — upgrading to a different type can alter ride height and handling characteristics. Always replace shock absorbers in pairs (both sides of the same axle) to maintain balanced handling, and have the wheel alignment checked afterwards — worn dampers often allow geometry to drift out of specification. Every part is dispatched from our UK warehouse with a 30-day money-back guarantee and free hassle-free returns.

Suitable cars

Equivalent products (162)

Show all 162 OE numbers
ABAKUS23201053
ABAKUS23201118
AL-KO301945
AL-KO810076
ASAM AUTOMOTIVE70915
ASHIKAMA00058
ASHIKAMA00078
ASHUKI by PalidiumPAL90047
ASHUKI by PalidiumPAL90051
ATECSOAMT00371
ATECSOAMT00509
AUTOMOTOR FrancePSG8505
AUTOMOTOR FrancePSG8915
A.Z. MeisterteileAZMT420850278
A.Z. MeisterteileAZMT420850472
A.Z. MeisterteileAZMT420851604
A.Z. MeisterteileAZMT420851643
BBR Automotive0011022641
BILSTEIN22135001
BILSTEIN22136572
BILSTEIN22144249
BOGE32K78A
BOGE32L35A
BSGBSG15300016
BSGBSG15300043
DACO Germany450328L
DAVID VASCOFL4626
DAVID VASCOFL9270
Dr!ve+DP1610100130
Dr!ve+DP1610100154
EGT373433EGT
EGT383525EGT
EUROREPAR1635538680
FAI AutoPartsFPSA140
FAI AutoPartsFPSA142
FISPAF210G0359
FISPAF210G0362
FRECCIASA201084
FREY850406401
GABRIELG54210
GABRIELG54211
GABRIELG54212
GABRIELG54213
GABRIELG54216
GABRIELG54217
GOLD8260846
GOLD9260846
GOLD9262520
GOLD9264040
GOLD9264048
GSP32307672
GSP32307682
HERTH+BUSS JAKOPARTSJ4300870
JAPANPARTSMM00058
JAPANPARTSMM00078
JAPANPARTSMQ00058
JAPANPARTSMQ00078
JAPKOMJ00058
JAPKOMJ00078
JP GROUP1442102670
KAMOKA2000407
KAMOKA20334023
KAMOKA20334758
KAVO PARTSSSA10037
KAVO PARTSSSA10279
KRAFT AUTOMOTIVE4002551
KRAFT AUTOMOTIVE4002822
KRAFTVOLL GERMANY15010530
KRAFTVOLL GERMANY15010680
KYB334626£61.99
KYB334628
KYB339270£80.99
LYNXAUTOG32779L
LYNXAUTOG32780L
MANDOMSS016152
MANDOMSS017277
MAPCO20675
MAPCO40673
MASTER-SPORT GERMANY16K002511
MASTER-SPORT GERMANY16K002511P
MASTER-SPORT GERMANY16K002513
MASTER-SPORT GERMANY16K002513P
MASTER-SPORT GERMANY311403PCSMS
MATRIX PROMX01320121
MAXGEAR110454
MAXGEAR110477
METZGER AUTOTEILE2340314
METZGER AUTOTEILE2340442
MEYLE3266230030
MEYLE3266230042
MEYLE3266230059
MOTRIO8550502847
NK65153058
NK651531941
NPSB490W02
OCAP82385FL
OCAP82630FL
Omnicraft2165668
Omnicraft2165672
Omnicraft2165758
Omnicraft2165760
Omnicraft2165776
Omnicraft2165778
OPEN PARTSSAB829231
OPEN PARTSSAB839831
OPTIMALA3457GL
OPTIMALA3590GL
OPTIMALA3613GL
OSSCA23826
PROFLEX AUTOMOTIVEPX5FC810
PROFLEX AUTOMOTIVEPX5FC900
PRT474226
PRT476556
QUINTON HAZELLQAG181058
QUINTON HAZELLQAG878118
RECORD FRANCE104644
RECORD FRANCE334644
RED-LINE39BW003
RED-LINE39BW004
RIDEX854S0204
RIDEX854S0249
SACHS310982
SACHS311403
SIDATF210G0359
SIDATF210G0362
SNRSA6504014L
SRLineS010470G
SRLineS010495G
StarkSKSA0130204
StarkSKSA0130256
STATIMA288
STELLOX42039245SX
STELLOX42039357SX
SYNCRONIXSYNC2004
SYNCRONIXSYNC2026
TASHIKOG39270
TOPRAN501628
TRISCAN870511101
TRUCKTEC AUTOMOTIVE0830071
VAICOV202181
VITAL SUSPENSIONS1101901
VITAL SUSPENSIONS1101981
VITAL SUSPENSIONS1101991
VITAL SUSPENSIONS210190
VITAL SUSPENSIONS210198
VITAL SUSPENSIONS210199
ZentPartsZ00669

Shock Absorber GH GH+351549Vcompatible car models

Car modelsBMW: 1 Convertible (E88), 1 Coupe (E82), 1 (E81), 1 (E87), 3 Convertible (E93), 3 Coupe (E92), 3 (E90), 3 Touring (E91)
Engines118 d; 116 d; 318 i; 316 i; 316 d
Year of manufacture2003-2013
Manufacturer article number (MPN)GH+351549V
OE part numbers310982, 31306771177, 31306771178, 31306771179, 31306771180, 31306777093, 31306777094, 31306777096, 31306777229, 31306777231, 31306784973, 31314036113, 31314036114, 31314036115, 31314036116, 31314036119, 31314036120, 31314036121, 31314036122, 313166768215 (+334 more)
Compatibility check

Loading vehicle data…

Please wait while we load vehicle compatibility information.
Description and what's included

GH gh+351549v PRO. Article number of recommended accessories: GH-621549. Fitting Position: VA. Fitting Position: VL. paired article number: GH+351549H. Shock Absorber Design: 4. Shock Absorber Mounting Type: 3. Shock Absorber Mounting Type: 8. Shock Absorber System: 2

What's included:
  • 1x Shock Absorber
Shipping, returns, warranty

Free UK delivery on orders over £99.00. Express and standard shipping available.

  • Standard delivery: 2-5 business days
  • Express delivery: 1-2 business days
  • Free returns within 14 days
  • All parts backed by manufacturer warranty

Warranty: 12-month manufacturer warranty on all parts. 14-day money-back guarantee if the part doesn't fit your vehicle.

Frequently Asked Questions

Is this Shock Absorber compatible with my car?

This Shock Absorber fits BMW vehicles. Use the vehicle selector at the top of the page to check exact compatibility — enter your car's make, model, and engine for a confirmed fitment match. All fitment data is verified through TecDoc.

What specifications does this GH Shock Absorber have?

This GH Shock Absorber has the following specifications: Fitting Position: VL; Fitting Position: VA; Shock Absorber Type: 2; Shock Absorber Design: 4; Shock Absorber System: 2; Shock Absorber Mounting Type: 8. Check the full specifications table above for complete details.

What OE part numbers does this Shock Absorber replace?

This Shock Absorber replaces OE part numbers: 310982, 31306771177, 31306771178, 31306771179, 31306771180, 31306777093, 31306777094, 31306777096 and 346 more. Cross-reference these numbers with your vehicle's original part number to confirm compatibility.

How much does a Shock Absorber cost?

This GH Shock Absorber is available for £40.99. Shock Absorber prices vary depending on brand, specifications, and vehicle compatibility. GH parts offer a balance of quality and value, backed by our 14-day money-back guarantee.

How do I know when to replace my Shock Absorber?

Look for excessive bouncing over bumps, nose-diving during braking, uneven tyre wear, fluid leaks on the shock body, or poor handling. Shocks should be inspected every 50,000 miles.

What tools do I need to replace a Shock Absorber?

Tools needed: floor jack, axle stands, 18-21mm socket for wheel bolts, spring compressor (if top mount must be removed), 17-19mm open-end spanner for shock piston nut, torque wrench. Difficulty: Moderate DIY. Safety warning: Coil springs store enormous energy -- only use purpose-built automotive spring compressors rated for the load. A spring released unexpectedly can cause fatal injury. Never improvise with non-rated tools.

Can I use this part as a replacement for OE 310982?

Yes, this GH Shock Absorber is a direct replacement for OE part number 310982. It is manufactured to meet or exceed original equipment specifications, ensuring proper fitment and performance. All cross-reference data is verified through TecDoc.

Related categories