Skip to main content
CP247
Gallery
BrandFTE
MPN9010509
OE refs34
SKU0054-9010509
GTIN / EAN3276429321607

Similar products

Customers also bought

Doing a front brake service?

Get all 2 parts in one click with our pre-assembled kit.

View kit

Details

SpecificationValue
BrandFTE
CategoryBrake pad set
Fitting PositionFront Axle
Thickness [mm]17.2 mm
Test MarkECE-R90
Width [mm]134 mm
Height [mm]77.1 mm
Brake SystemSUMITOMO

OE/OEM numbers (34)

Search by this OE number to find compatible parts

Where this part fits

Original-fit position for OE 4605A481. The red ring marks where this part installs on the vehicle.

BRAKE PADS — Brakes
BrakesPosition main

About this product

FTE brake pads (9010509) deliver consistent stopping power through a friction compound engineered for low noise, reduced brake dust, and stable bite across a wide temperature range. The pad compound characteristics — Fitting Position: Front Axle, Thickness [mm]: Fibreglass, Aluminium mm, Test Mark: ECE-R90, Width [mm]: 134 mm — are selected to balance progressive pedal feel with minimal wear on mating discs. Designed as a direct replacement for LEXUS, MITSUBISHI, TOYOTA, TOYOTA (FAW) applications, these pads slot into the original caliper bracket without modification. Cross-references OE part numbers: 025 240 2417/PD, 025 240 2417/W, 04465-04070, 0446504070 and 122 more. FTE brake friction products are validated in independent dynamometer tests and are used by authorised service centres throughout Europe. Brake pads typically need replacing every 25,000–50,000 miles, depending on driving style, vehicle weight, and whether you drive mostly in urban stop-start traffic or on open roads. Watch for squealing or grinding noises when braking, increased stopping distances, a pulsating brake pedal, or a brake warning light on your dashboard — any of these signals that the friction material is worn to its minimum thickness. Brake pad replacement is a moderate DIY job requiring basic hand tools, a jack, and axle stands — allow approximately 1–2 hours per axle for a first-time installer, less if you have experience with caliper removal. When choosing brake pads, look for ECE R90 approval (mandatory for road use in Europe), copper-free formulations for environmental compliance, and a shim or anti-squeal backing plate for quiet operation. Replacing brake pads promptly prevents scoring and heat damage to the more expensive brake discs, saving significantly on repair costs in the long run. Every part is dispatched from our UK warehouse with a 30-day money-back guarantee and free hassle-free returns.

Brake pad set buying guide

Why replace this part?

Brake pads are the primary friction component in your braking system. As they wear thin, braking performance deteriorates, increasing stopping distances and putting your safety at risk. Worn pads can also damage brake discs, leading to more expensive repairs.

Signs you need a replacement

  • Squealing or grinding noises when braking
  • increased stopping distances
  • brake pedal vibration or pulsation
  • dashboard warning light
  • visible pad thickness below 3mm
  • pulling to one side when braking

When to replace

Every 30,000–70,000 miles depending on driving conditions, pad material, and vehicle weight. City driving with frequent stops wears pads faster than motorway driving.

Installation difficulty:Moderate — requires basic tools and mechanical knowledge

Suitable cars

Equivalent products (89)

Show all 89 OE numbers
A.B.S.37420
AISINA1N011
AISINA1N137
ASHIKA5002205
ASHUKI by Palidium1080-9012
ATE13046057472
ATE605747
BENDIX572515B
BORG & BECKBBP1927
BOSCH986494153
Brake ENGINEERINGPA1616
BREMBO07.D435.34
BREMBOP 83 066
BREMBOP83066
BREMBOP 83 066X
BREMBOP83066X
BREMBOP83102
BREMBOP83102X
COMLINEADB31201
FEBI BILSTEIN222363
FIRST LINE3565
FMSI-VERBANDD976-7877
FREN-J892281
FTEBL1923A2
GIRLING6133649
HELLA8DB 355 010-491
HELLA8DB 355 014-121
HELLA PAGID8DB 355 010-491
HELLA PAGID8DB355010491
HELLA PAGID8DB 355 014-121
HERTH+BUSS JAKOPARTSJ3602109
HP (ZEBRA)HP7666
HP (ZEBRA)W20288
HP (ZEBRA)W20289
ICER181665£50.99
JAPANPARTSPA-205AF
JAPANPARTSPA205AF
LPR05P1379£36.99
LPR5P1379
LUCAS ELECTRICAL6133649
LUCAS ELECTRICALGDB3364
MAFIXPL500
METELLI22-0454-0
METELLI2204540
MEYLE025 240 2417/PD
MEYLE025 240 2417/W
MGAMGA787
MINTEXMDB2553
MINTEXMDB2984
NECTOFD7123A
NIPPARTSJ3602109
NK1501224569
NK224569
NUOVA TECNODELTAPNT9731
OPTIMAL12305
PAGIDT1368
PAGIDT1795
QH BeneluxBP1363
QUINTON HAZELLBP1363
REMSA0988.00
REMSA2988.00
REMSA988.00
REMSA98800
ROADHOUSE2988.00
ROADHOUSE298800
ROULUNDS BRAKING892281
ROULUNDS RUBBER892281
sbs1501224569
SIMER943
TRISCAN8110 13064
TRWGDB3364£38.99
TRWGDB8998AT
TRWGDB8998UT
ZIMMERMANN240241701

Brake pad set FTE 9010509compatible car models

Car modelsLEXUS: GX (J12), GX (URJ15, GRJ15); MITSUBISHI: PAJERO III Canvas Top (V6W, V7W), PAJERO IV (V8W, V9W), PAJERO IV Van (V9, V8, V8V), PAJERO SPORT II (KH, KG); TOYOTA: 4 RUNNER IV (N21), 4 RUNNER V (N28), FJ CRUISER (GSJ1), FORTUNER (N15, N16), FORTUNER (N5, N6), HILUX VIII Pickup (N1), HILUX VIII Platform/Chassis (N1), HILUX VII Pickup (N1, N2, N3), HILUX VII Platform/Chassis (N1, N2), LAND CRUISER PRADO (J12) (+5 more); TOYOTA (FAW): PRADO (J12)
Engines470 (UZJ120); 460 4WD (URJ150); 3.2 DI-D (V68W, V78W); 3.2 4WD (V98W); 3.2 DI-D; 3.2 DI-D 4WD; 4.0 EFI 4WD (GRN215); 4.0 (GRN280); 4.0 4WD (GSJ15); 2.7 4x4 (TGN156); 2.5 D-4D (KUN60); 2.4 D 4WD (GUN125); 2.4 D 4WD (GUN125, GUN125R); 2.5 D-4D 4WD (KUN25); 3.0 D 4WD (KUN26) (+7 more)
Year of manufacture1999-2018
Manufacturer article number (MPN)9010509
OE part numbers04465-04070, 04465-0K030, 04465-0K090, 04465-0K360, 04465-0K370, 044650K400, 04465-0K401, 04465-0K580, 04465-35250, 04465-35290, 0446535330, 04465-60210, 04465-60270, 04465-60320, 04465-YZZDB, 446504070, 44650K030, 44650K090, 44650K360, 44650K370 (+14 more)
Compatibility check

Loading vehicle data…

Please wait while we load vehicle compatibility information.
Description and what's included

FTE 9010509 Brake pad set. Brake System: SUMITOMO. Fitting Position: VA. Height [mm]: 77,1 mm. Test Mark: ECE-R90. Thickness [mm]: 17,2 mm. Wear Warning Contact: 2. Wear Warning Contact: 4. Width [mm]: 134 mm

What's included:
  • 1x Set of brake pads (axle set)
  • Wear indicator wire (where applicable)
  • Mounting accessories (where applicable)
Shipping, returns, warranty

Free UK delivery on orders over £99.00. Express and standard shipping available.

  • Standard delivery: 2-5 business days
  • Express delivery: 1-2 business days
  • Free returns within 14 days
  • All parts backed by manufacturer warranty

Warranty: 12-month manufacturer warranty on all parts. 14-day money-back guarantee if the part doesn't fit your vehicle.

Frequently Asked Questions

Is this Brake pad set compatible with my car?

This Brake pad set fits LEXUS, MITSUBISHI, TOYOTA, TOYOTA (FAW) vehicles. Use the vehicle selector at the top of the page to check exact compatibility — enter your car's make, model, and engine for a confirmed fitment match. All fitment data is verified through TecDoc.

What specifications does this FTE Brake pad set have?

This FTE Brake pad set has the following specifications: Fitting Position: VA; Thickness [mm]: 17,2 mm; Test Mark: ECE-R90; Width [mm]: 134 mm; Height [mm]: 77,1 mm; Wear Warning Contact: 2. Check the full specifications table above for complete details.

What OE part numbers does this Brake pad set replace?

This Brake pad set replaces OE part numbers: 04465-04070, 04465-0K030, 04465-0K090, 04465-0K360, 04465-0K370, 044650K400, 04465-0K401, 04465-0K580 and 26 more. Cross-reference these numbers with your vehicle's original part number to confirm compatibility.

How much does a Brake pad set cost?

This FTE Brake pad set is available for £36.99. Brake pad set prices vary depending on brand, specifications, and vehicle compatibility. FTE parts offer a balance of quality and value, backed by our 14-day money-back guarantee.

How do I know when to replace my Brake pad set?

Common signs include squealing or grinding noises when braking, increased stopping distances, brake pedal vibration, or a dashboard warning light. Most brake pads should be inspected every 20,000 miles and replaced when pad thickness falls below 3mm.

What tools do I need to replace a Brake pad set?

Tools needed: floor jack and axle stands, lug wrench or 19mm socket, brake caliper wind-back tool (or C-clamp), 7mm hex / Torx socket for caliper bolts, brake cleaner spray, copper grease, torque wrench. Difficulty: Moderate DIY. Safety warning: Never compress the caliper piston without checking the brake fluid reservoir level will not overflow; brake fluid is corrosive -- keep it off painted surfaces and skin.

Can I use this part as a replacement for OE 04465-04070?

Yes, this FTE Brake pad set is a direct replacement for OE part number 04465-04070. It is manufactured to meet or exceed original equipment specifications, ensuring proper fitment and performance. All cross-reference data is verified through TecDoc.

Related categories