Skip to main content
CP247
Gallery
BrandFTE
MPN9010135
OE refs132
SKU0054-9010135
GTIN / EAN3276429317860

Similar products

Customers also bought

Doing a front brake service?

Get all 2 parts in one click with our pre-assembled kit.

View kit

Details

SpecificationValue
BrandFTE
CategoryBrake pad set
Fitting PositionFront Axle
Thickness [mm]18.3 mm
Test MarkECE-R90
Width [mm]133 mm
Height [mm]53 mm
Brake SystemAKEBONO

OE numbers (132)

Search by this OE number to find compatible parts

About this product

FTE brake pads (9010135) deliver consistent stopping power through a friction compound engineered for low noise, reduced brake dust, and stable bite across a wide temperature range. The pad compound characteristics — Fitting Position: Front Axle, Thickness [mm]: Composite, Cast Iron mm, Test Mark: ECE-R90, Width [mm]: 133 mm — are selected to balance progressive pedal feel with minimal wear on mating discs. Designed as a direct replacement for TOYOTA applications, these pads slot into the original caliper bracket without modification. Cross-references OE part numbers: 00375, 025 216 0117/W, 0402.02, 04465-02020 and 253 more. FTE brake friction products are validated in independent dynamometer tests and are used by authorised service centres throughout Europe. Brake pads typically need replacing every 25,000–50,000 miles, depending on driving style, vehicle weight, and whether you drive mostly in urban stop-start traffic or on open roads. Watch for squealing or grinding noises when braking, increased stopping distances, a pulsating brake pedal, or a brake warning light on your dashboard — any of these signals that the friction material is worn to its minimum thickness. Brake pad replacement is a moderate DIY job requiring basic hand tools, a jack, and axle stands — allow approximately 1–2 hours per axle for a first-time installer, less if you have experience with caliper removal. When choosing brake pads, look for ECE R90 approval (mandatory for road use in Europe), copper-free formulations for environmental compliance, and a shim or anti-squeal backing plate for quiet operation. Replacing brake pads promptly prevents scoring and heat damage to the more expensive brake discs, saving significantly on repair costs in the long run. Every part is dispatched with tracked delivery and a 14-day money-back guarantee with hassle-free returns.

Brake pad set buying guide

Why replace this part?

Brake pads are the primary friction component in your braking system. As they wear thin, braking performance deteriorates, increasing stopping distances and putting your safety at risk. Worn pads can also damage brake discs, leading to more expensive repairs.

Signs you need a replacement

  • Squealing or grinding noises when braking
  • increased stopping distances
  • brake pedal vibration or pulsation
  • dashboard warning light
  • visible pad thickness below 3mm
  • pulling to one side when braking

When to replace

Every 30,000–70,000 miles depending on driving conditions, pad material, and vehicle weight. City driving with frequent stops wears pads faster than motorway driving.

Installation difficulty:Moderate — requires basic tools and mechanical knowledge

Suitable cars

Equivalent products (113)

Show all 113 OE numbers
A.B.S.36777
AISINA1N048
AKEBONOA -394WK
ASHUKI by PalidiumT112-15
ASHUKI by PalidiumT11215
ATE13046059512
ATE605951
BARUMBA2116
BENDIX572333B
BORG & BECKBBP1377
BORG & BECKBBP1683
BOSCH986461123
Brake ENGINEERINGPA854
BREMBOP83034
CECAUTO61.799.0
COMLINEADB3260
COMLINECBP3260
DOYENGDB1143
FIRST LINE3119
FMSI-VERBANDD562-7441
FMSI-VERBANDD695-7441
FREN-J481681
fri.tech.152.0
FTEBL1353A2
GALFERB1-G102-1099-2-02
GALFERG1 021099
GIRLING6111439
GIRLING6131479
GIRLING6131559
GIRLING6132079
HELLA8DB 355 016-421
HELLA PAGID8DB 355 016-421
HELLA PAGID8DB355016421
HP (ZEBRA)HP2830
HP (ZEBRA)HP7026
HP (ZEBRA)HP7244
ICER181005
JAPANPARTSPA-264AF
JAPANPARTSPA264AF
LEADER PARTS2030637.1
LPR05P561£23.99
LPR5P561
LUCAS ELECTRICAL6111439
LUCAS ELECTRICAL6131479
LUCAS ELECTRICAL6132079
MAFIXPL449
MAGNETI MARELLIBP0584
MAGNETI MARELLIBP0781
METALFREN00375
METELLI22-0149-0
METELLI2201490
METZGER AUTOTEILE1170209
MEYLE025 216 0117/W
MGAMGA375
MINTEXMDB1658
MK KashiyamaD02118
MOPRODMDP1152
NECTOFD6584A
NECTOFD6584E
NIPPARTSJ3602064
NK1501224528
NK224528
NUOVA TECNODELTAPNT165
OPTIMAL10179
PAGIDT3013
PEX7.224
QH BeneluxBP742
QUINTON HAZELLBP742
REMSA0402.02
REMSA2402.02
REMSA2402.12
REMSA2402.22
REMSA402.02
REMSA40202
REMSA402.12
REMSA402.22
ROADHOUSE2402.02
ROADHOUSE240202
ROADHOUSE2402.12
ROADHOUSE2402.22
ROADHOUSE240222
ROULUNDS BRAKING481681
ROULUNDS RUBBER481681
sbs1501224528
SIMER629
SPIDAN31856
STARLINEBD S094P
STARLINEBDS094P
STOP572333S
TRISCAN8110 13100
TRUSTING152.0
TRUSTING1520
TRWGDB1143£26.99
TRWGDB3147£24.99
TRWGDB3155£31.99
TRWGDB3207£35.99
WOKING502302
ZIMMERMANN216011751

Brake pad set FTE 9010135compatible car models

Car modelsTOYOTA: CALDINA Estate (T19), CALDINA Estate (T21), CAMRY Estate (V1), CAMRY (V1), CAMRY (V2), CARINA E VI Saloon (T19), CARINA E VI Sportswagon (T19), CARINA E VI (T19), CELICA Coupe (T20), CHASER (X10) (+20 more)
Engines1.8 (ST190, ST190G); 1.8 (AT211G); 2.2 (SXV10, SXV10R); 2.2 (SDV10, SXV10); 2.2 (SXV20); 1.5 SG (AT192, AT192R); 1.6 (AT190); 1.6 16V (AT190, AT190R); 1.8 i 16V (AT200); 2.5 (JZX100, JZX100); 1.3 12V (EE100, EE100R); 1.4 (EE111, EE111R); 1.3 (EE110); 1.4 16V (ZZE111, ZZE111R); 2.0 D4d (CDE110) (+9 more)
Year of manufacture1987-2004
Manufacturer article number (MPN)9010135
OE part numbers04465-02020, 04465-05010, 04465-06010, 04465-12110, 04465-12150, 04465-12230, 04465-12500, 04465-12530, 04465-12540, 04465-12550, 04465-12593, 04465-20110, 04465-20120, 04465-20130, 04465-20140, 04465-20450, 04465-20490, 04465-22300, 04465-30240, 04465-32200 (+112 more)
Compatibility check

Loading vehicle data…

Please wait while we load vehicle compatibility information.
Description and what's included

FTE 9010135 Brake pad set. Brake System: AKEBONO. Fitting Position: VA. Height [mm]: 53 mm. Test Mark: ECE-R90. Thickness [mm]: 18,3 mm. Wear Warning Contact: 2. Wear Warning Contact: 4. Width [mm]: 133 mm

What's included:
  • 1x Set of brake pads (axle set)
  • Wear indicator wire (where applicable)
  • Mounting accessories (where applicable)
Shipping, returns, warranty

Free UK delivery on orders over £99.00. Tracked standard shipping.

  • Standard delivery: 5–9 business days
  • Order before 5pm — ships the next working day
  • Free returns within 14 days
  • All parts backed by manufacturer warranty

Warranty: 12-month manufacturer warranty on all parts. 14-day money-back guarantee if the part doesn't fit your vehicle.

Frequently Asked Questions

Is this Brake pad set compatible with my car?

This Brake pad set fits TOYOTA vehicles. Use the vehicle selector at the top of the page to check exact compatibility — enter your car's make, model, and engine for a confirmed fitment match. All fitment data is verified through TecDoc.

What specifications does this FTE Brake pad set have?

This FTE Brake pad set has the following specifications: Fitting Position: VA; Thickness [mm]: 18,3 mm; Test Mark: ECE-R90; Width [mm]: 133 mm; Height [mm]: 53 mm; Wear Warning Contact: 2. Check the full specifications table above for complete details.

What OE part numbers does this Brake pad set replace?

This Brake pad set replaces OE part numbers: 04465-02020, 04465-05010, 04465-06010, 04465-12110, 04465-12150, 04465-12230, 04465-12500, 04465-12530 and 124 more. Cross-reference these numbers with your vehicle's original part number to confirm compatibility.

How much does a Brake pad set cost?

This FTE Brake pad set is available for £31.99. Brake pad set prices vary depending on brand, specifications, and vehicle compatibility. FTE parts offer a balance of quality and value, backed by our 14-day money-back guarantee.

How do I know when to replace my Brake pad set?

Common signs include squealing or grinding noises when braking, increased stopping distances, brake pedal vibration, or a dashboard warning light. Most brake pads should be inspected every 20,000 miles and replaced when pad thickness falls below 3mm.

What tools do I need to replace a Brake pad set?

Tools needed: floor jack and axle stands, lug wrench or 19mm socket, brake caliper wind-back tool (or C-clamp), 7mm hex / Torx socket for caliper bolts, brake cleaner spray, copper grease, torque wrench. Difficulty: Moderate DIY. Safety warning: Never compress the caliper piston without checking the brake fluid reservoir level will not overflow; brake fluid is corrosive -- keep it off painted surfaces and skin.

Can I use this part as a replacement for OE 04465-02020?

Yes, this FTE Brake pad set is a direct replacement for OE part number 04465-02020. It is manufactured to meet or exceed original equipment specifications, ensuring proper fitment and performance. All cross-reference data is verified through TecDoc.

Related categories