Skip to main content
CP247
Gallery
BrandBOSCH
MPN0 986 494 618
OE refs106
SKU0030-0 986 494 618
GTIN / EAN4047025363990

Similar products

Customers also bought

Doing a front brake service?

Get all 2 parts in one click with our pre-assembled kit.

View kit

Details

SpecificationValue
BrandBOSCH
CategoryBrake pad set
Manufacturer RestrictionSUMITOMO System
Thickness [mm]15 mm
Test MarkECE-R90
Width [mm]108.6 mm
Height [mm]45.4 mm

OE/OEM numbers (106)

Search by this OE number to find compatible parts

About this product

BOSCH brake pads (0 986 494 618) deliver consistent stopping power through a friction compound engineered for low noise, reduced brake dust, and stable bite across a wide temperature range. The pad compound characteristics — Manufacturer Restriction: SUMITOMO System, Thickness [mm]: EPDM mm, Test Mark: ECE-R90, Width [mm]: 108, Plastic mm — are selected to balance progressive pedal feel with minimal wear on mating discs. Designed as a direct replacement for DAIHATSU, NISSAN, SUBARU, SUZUKI applications, these pads slot into the original caliper bracket without modification. Cross-references OE part numbers: 00491 97217, 00491 97217 000, 04465 B1010, 04465B1010 and 214 more. BOSCH brake friction products are validated in independent dynamometer tests and are used by authorised service centres throughout Europe. Brake pads typically need replacing every 25,000–50,000 miles, depending on driving style, vehicle weight, and whether you drive mostly in urban stop-start traffic or on open roads. Watch for squealing or grinding noises when braking, increased stopping distances, a pulsating brake pedal, or a brake warning light on your dashboard — any of these signals that the friction material is worn to its minimum thickness. Brake pad replacement is a moderate DIY job requiring basic hand tools, a jack, and axle stands — allow approximately 1–2 hours per axle for a first-time installer, less if you have experience with caliper removal. When choosing brake pads, look for ECE R90 approval (mandatory for road use in Europe), copper-free formulations for environmental compliance, and a shim or anti-squeal backing plate for quiet operation. Replacing brake pads promptly prevents scoring and heat damage to the more expensive brake discs, saving significantly on repair costs in the long run. Every part is dispatched from our UK warehouse with a 30-day money-back guarantee and free hassle-free returns.

Brake pad set buying guide

Why replace this part?

Brake pads are the primary friction component in your braking system. As they wear thin, braking performance deteriorates, increasing stopping distances and putting your safety at risk. Worn pads can also damage brake discs, leading to more expensive repairs.

Signs you need a replacement

  • Squealing or grinding noises when braking
  • increased stopping distances
  • brake pedal vibration or pulsation
  • dashboard warning light
  • visible pad thickness below 3mm
  • pulling to one side when braking

When to replace

Every 30,000–70,000 miles depending on driving conditions, pad material, and vehicle weight. City driving with frequent stops wears pads faster than motorway driving.

Installation difficulty:Moderate — requires basic tools and mechanical knowledge

About BOSCH

Robert Bosch GmbH, founded in 1886 in Stuttgart, Germany, is one of the world's largest automotive parts suppliers. Bosch specialises in braking systems, fuel injection, spark plugs, alternators, and electronic engine management. As an OE supplier to virtually every major car manufacturer, Bosch parts meet or exceed original equipment specifications. With over 130 years of engineering innovation, choosing Bosch means choosing proven reliability backed by extensive research and development.

Suitable cars

Equivalent products (98)

Show all 98 OE numbers
APECPAD1111
APECPAD1463
APECPAD1510
APECPD3148
APECPD3210
ATE13 0460 5613 2
ATE13 0460 5621 2
ATE13 0460 5887 2
ATE605887
BENDIX572471B
BOSCH0 986 424 695
BREMBOP16013
BREMBOP16013N
BREMBOP16013X
BREMBOP16018
BREMBOP16018N
BREMBOP61108
BREMBOP61108N
BREMBOP79012
BREMBOP79012N
GIRLING6132369
HELLA8DB 355 009-631
HELLA8DB 355 014-001
HELLA8DB 355 015-071
HELLA8DB 355 015-731
HELLA8DB 355 015-811
HELLA8DB 355 027-581
HELLA8DB 355 028-381
HELLA8DB 355 028-861
HELLA8DB 355 039-691
HELLA8DB 355 045-451
HERTH+BUSS ELPARTSJ3608021
ICER181452
ICER181833
ICER181833203
ICER181872
LPR05P1110£32.99
LPR05P1442£29.99
LPR05P1632£23.99
LPR05P1673£36.99
LPR05P2341£31.99
LPR05P796£28.99
MINTEXMDB1987
MINTEXMDB2968
MINTEXMDB3072
MINTEXMDB82968
MK KashiyamaD902702
MK KashiyamaD9029M
NISSHINBOPF9426
NISSHINBOPF9443
PAGIDT 1269
PAGIDT1269N
PAGIDT 1778
PAGIDT1778N
PAGIDT 1933
PAGIDT 2046
RAICAM5061
REMSA724 11
ROADHOUSE2119900
ROADHOUSE2724 02
ROADHOUSE2724 11
ROADHOUSE2724 42
TEXTAR2350715005
TEXTAR2350801
TEXTAR2428310
TEXTAR2442302
TEXTAR2526201
TRUSTING4300
TRWGDB3236£33.99
TRWGDB3276£32.99
TRWGDB3351
TRWGDB3359£34.99
TRWGDB3411£31.99
TRWGDB3430£35.99
TRWGDB7128
TRWGDB90000
VALEO598832
VALEO670733
VALEO671323
VALEO671733

Brake pad set BOSCH 0 986 494 618compatible car models

Car modelsDAIHATSU: COPEN (L880, L881), CUORE VII (L275, L285, L276), CUORE VI (L251, L250, L260), SIRION (M3), TREVIS, YRV (M2); NISSAN: PIXO (UA0); SUBARU: JUSTY IV; SUZUKI: ALTO K10, ALTO VI (FF, HA24), ALTO VII (GF, HA25, HA35), CARRY Bus, CARRY Platform/Chassis (FD, DA5T, DA6T), CARRY Van (FD), CELERIO (LF), HUSTLER (MR52, MR92), IGNIS I (FH)
Engines0.7; 1.0 (L276); 1.0; 1.0 LPG; 1.3 GTti (M201); 1.0 BiFuel; 1.1 (RF410); 1.0 (AMF310, GFC31S); 1.3; 1.3 (DA32T); 1.3 16 V (DA32V); 1.0 (AVK310); 0.7 HYBRID; 1.3 4WD (RG413)
Year of manufacture1999-2020
Manufacturer article number (MPN)0 986 494 618
OE part numbers00491 97217, 00491 97217 000, 04465 B1010, 04465 B1020, 04465B1020000, 04465B1040, 04465B1040000, 04465 B1050, 04465B1090, 04465 B1110, 04465B1170, 04465B1330, 04465 B1380, 04465B1380000, 04465B2020, 04465B2020000, 04465 B2050, 04491 97207 000, 04491 97216, 04491 97216 000 (+86 more)
Compatibility check

Loading vehicle data…

Please wait while we load vehicle compatibility information.
Description and what's included

BOSCH 0986494618 Brake pad set. Height [mm]: 45,4 mm. Manufacturer Restriction: SUMITOMO System. Material: 93. Number of springs: 4. Supplementary Article/Info 2: 256. Test Mark: ECE-R90. Thickness [mm]: 15 mm. Wear Warning Contact: 4

What's included:
  • 1x Set of brake pads (axle set)
  • Wear indicator wire (where applicable)
  • Mounting accessories (where applicable)
Shipping, returns, warranty

Free UK delivery on orders over £99.00. Express and standard shipping available.

  • Standard delivery: 2-5 business days
  • Express delivery: 1-2 business days
  • Free returns within 14 days
  • All parts backed by manufacturer warranty

Warranty: 12-month manufacturer warranty on all parts. 14-day money-back guarantee if the part doesn't fit your vehicle.

Frequently Asked Questions

Is this Brake pad set compatible with my car?

This Brake pad set fits DAIHATSU, NISSAN, SUBARU, SUZUKI vehicles. Use the vehicle selector at the top of the page to check exact compatibility — enter your car's make, model, and engine for a confirmed fitment match. All fitment data is verified through TecDoc.

What specifications does this BOSCH Brake pad set have?

This BOSCH Brake pad set has the following specifications: Manufacturer Restriction: SUMITOMO System; Thickness [mm]: 15 mm; Test Mark: ECE-R90; Width [mm]: 108,6 mm; Height [mm]: 45,4 mm; Material: 93. Check the full specifications table above for complete details.

What OE part numbers does this Brake pad set replace?

This Brake pad set replaces OE part numbers: 00491 97217, 00491 97217 000, 04465 B1010, 04465 B1020, 04465B1020000, 04465B1040, 04465B1040000, 04465 B1050 and 98 more. Cross-reference these numbers with your vehicle's original part number to confirm compatibility.

How much does a Brake pad set cost?

This BOSCH Brake pad set is available for £31.99. Brake pad set prices vary depending on brand, specifications, and vehicle compatibility. BOSCH parts offer a balance of quality and value, backed by our 14-day money-back guarantee.

How do I know when to replace my Brake pad set?

Common signs include squealing or grinding noises when braking, increased stopping distances, brake pedal vibration, or a dashboard warning light. Most brake pads should be inspected every 20,000 miles and replaced when pad thickness falls below 3mm.

What tools do I need to replace a Brake pad set?

Tools needed: floor jack and axle stands, lug wrench or 19mm socket, brake caliper wind-back tool (or C-clamp), 7mm hex / Torx socket for caliper bolts, brake cleaner spray, copper grease, torque wrench. Difficulty: Moderate DIY. Safety warning: Never compress the caliper piston without checking the brake fluid reservoir level will not overflow; brake fluid is corrosive -- keep it off painted surfaces and skin.

Can I use this part as a replacement for OE 00491 97217?

Yes, this BOSCH Brake pad set is a direct replacement for OE part number 00491 97217. It is manufactured to meet or exceed original equipment specifications, ensuring proper fitment and performance. All cross-reference data is verified through TecDoc.

Is the BOSCH 0 986 494 618 the same as the BOSCH 0 986 424 011?

No, while both are Brake pad set parts, they are different products. The BOSCH 0 986 494 618 has Manufacturer Restriction: SUMITOMO System, Thickness [mm]: 15 mm, Test Mark: ECE-R90. The BOSCH 0 986 424 011 may differ in dimensions, fitting position, or material composition. Always verify compatibility with your specific vehicle using our vehicle selector, or contact our customer service team for assistance.

Related categories